Tito, N., Keerthi, G., Balasubramanian, N., and Anand, T N C, “New Concept PFI-Atomizer Fueling System in a Small Single Cylinder SI Engine,”
SAE Technical Paper 2020-01-2233, 7, 2020, http://doi.org/
doi:10.4271/2020-01-2233.
Joshi, S., Ranade, S., and Anand, T.N.C., “Secondary breakup of low viscosity dops in a continuous air jet,” in Droplets2019, Durham, UK, 2019.
Nithin, J.T., Lokesh, M., Balasubramanian, N., and Anand, T.N.C., “Atomization characteristics of a compact disc-type ultrasonic atomizer unit,” in ILASS - Europe 2019, 29th Conference on Liquid Atomization and Spray Systems, Paris, France, 2019.
Joshi, S., Ranade, S., and Anand, T.N.C., “Breakup of a surfactant-laden drop in a continuous air jet stream,” in ILASS - Europe 2019, 29th Conference on Liquid Atomization and Spray Systems, Paris, France, 2019.
Senthilkumar, P., Bakshi, S., and Anand, T.N.C., “Break up length on Urea Water Solution jet in hot cross flow,” in
Proceedings ILASS - Europe 2017, 28th Conference on Liquid Atomization and Spray Systems, Valencia, Spain, 2017, http://doi.org/
10.4995/ilass2017.2017.4982.
Balasubramanian, N., Keerthi, G.R., Nithin, J.T., Jayabalan, S., and Anand, T.N.C., “Application of a New-Concept Gasoline Pump Injector (GPI) on a Motorcycle Engine,” in SAE Technical Paper SAE 2017-32-0002, Jakarta, Indonesia, 2017.
Sandeep, M., Burkhardt, A., Chatterjee, D., and Bakshi, S., “Numerical Prediction of Purging of a GDI nozzle at the End of Injection,” presented at the ILASS - Asia 2016, 18th Annual Conference on Liquid Atomization and Spray Systems, Chennai, India, 2016.
Radhakrishnan, S., Anand, T.N.C., and Bakshi, S., “Effect of ambient gas on droplet evaporation,” presented at the ILASS - Asia 2016, 18th Annual Conference on Liquid Atomization and Spray Systems, Chennai, India, 2016.
Prashanth, W.S., Sabin, T.R., Sarkar, S., Anand, T.N.C., and Bakshi, S., “Experimental Investigation of Melt Delivery Tube Position on Metal Atomization,” presented at the ILASS - Asia 2016, 18th Annual Conference on Liquid Atomization and Spray Systems, Chennai, India, 2016.
Pal, M. and Bakshi, S., “Study of the Effect of Ambient Vapour Concentration on the Spray Structure in Constant Volume Spray Test Rig,” presented at the ILASS - Europe 2016, 27th European Conference on Liquid Atomization and Spray Systems, Brighton, United Kingdom, 2016.
Pal, M. and Bakshi, S., “Liquid Phase Penetration of n-Hexane Sprays at different Vapour Concentration of the Ambient,” presented at the ILASS - Asia 2016, 18th Annual Conference on Liquid Atomization and Spray Systems, Chennai, India, 2016.
Mikhil, S., Anand, T.N.C., and Bakshi, S., “Experimental Studies on Single Droplet Evaporation of Urea Water Solution (UWS) at Elevated Temperatures,” presented at the ILASS - Europe 2016, 27th European Conference on Liquid Atomization and Spray Systems, Brighton, United Kingdom, 2016.
Mikhil, S., Anand, T.N.C., and Bakshi, S., “Experimental Studies on an Evaporating Droplet of Urea Water Solution; Effect of Ambient Temperature and Initial Urea Mass Fraction on Evaporation Rate,” presented at the ILASS - Asia 2016, 18th Annual Conference on Liquid Atomization and Spray Systems, Chennai, India, 2016.
Joshi, S. and Anand, T.N.C., “Studies on secondary atomization of molten gallium droplets at nearly critical weber numbers,” presented at the ILASS - Asia 2016, 18th Annual Conference on Liquid Atomization and Spray Systems, Chennai, India, 2016.
Gautham, K., Narendiren, C G, and Bakshi, S., “An approach for including evaporation in a model for predicting spray penetration,” presented at the ILASS - Asia 2016, 18th Annual Conference on Liquid Atomization and Spray Systems, Chennai, India, 2016.
Chandrasekar, S., Anand, T.N.C., and Ramesh, A., “Spray Characterization Of A Multi Hole Port Fuel Heated Tip Injector,” presented at the ILASS - Asia 2016, 18th Annual Conference on Liquid Atomization and Spray Systems, Chennai, India, 2016.
Babu, A. and Anand, T.N.C., “Design, Development and Experimental Validation of an Open Source Program for Particle/Droplet Image Analysis,” presented at the ILASS - Asia 2016, 18th Annual Conference on Liquid Atomization and Spray Systems, Chennai, India, 2016.
Srivathsan, N and Bakshi, S., “Computational study of heat transfer through Raleigh-Marangoni convection in an evaporating pendant droplet,” presented at the ILASS - Americas 2015, 27 th Annual Conference on Liquid Atomization and Spray Systems, Raleigh, NC, 2015.
Srivathsan, N and Bakshi, S., “Comparison of heat transfer from a suspending needle and a solid suspender supporting an evaporating pendant droplet,” presented at the ICLASS 2015 - 13th Triennial International Conference on Liquid Atomization and Spray Systems, Tainan, Taiwan, 2015.
Somasundaram, S., Anand, T.N.C., and Bakshi, S., “Study on flow induced by an evaporating pendant droplet,” presented at the ICLASS-2015, 13th Triennial International Conference on Liquid Atomization and Spray Systems, Tainan, Taiwan, 2015.
Sarkar, S., Prashanth, W.S., Anand, T.N.C., Sivaprasad, P.V., and Bakshi, S., “Visualization of Secondary Breakup of Liquid Tin during Powder Production,” presented at the ICLASS-2015, 13th Triennial International Conference on Liquid Atomization and Spray Systems, Tainan, Taiwan, 2015.
Radhakrishnan, S., Anand, T.N.C., and Bakshi, S., “Experimental study of induced flow around evaporating droplets in a high density ambient,” presented at the ICLASS-2015, 13th Triennial International Conference on Liquid Atomization and Spray Systems, Tainan, Taiwan, 2015.
Pal, M., Anand, T.N.C., and Bakshi, S., “Comparison of a single plume spray with a multi plume spray from a multi-hole common-rail diesel injector,” presented at the ICLASS-2015, 13th Triennial International Conference on Liquid Atomization and Spray Systems, Tainan, Taiwan, 2015.
Lokesh, M. and Anand, T.N.C., “Encapsulation and separation in collision between immiscible liquid drops,” presented at the ICLASS-2015, 13th Triennial International Conference on Liquid Atomization and Spray Systems, Tainan, Taiwan, 2015.
Joshi, S. and Anand, T.N.C., “Studies on Secondary Atomization of Non-Newtonian Molten Droplets,” presented at the ICLASS-2015, 13th Triennial International Conference on Liquid Atomization and Spray Systems, Tainan, Taiwan, 2015.
Jain, S. and Anand, T.N.C., “A Novel Concept for Mixture Preparation in Port Fuel Injected Engines,” presented at the SETC2015: 21st Small Engine Technology Conference, SAE Technical Paper 2015-32-0773, Osaka, Japan, 2015.
Balasubramanian, N., Keerthi, G., and Anand, T.N.C., “Fuelling a Two-Wheeler Engine by Ultrasonic Atomization,” in SAE Technical Paper 2015-32-0757, Osaka, Japan, 2015.
Balasubramanian, N., Keerthi, G., and Anand, T.N.C., “Fuelling a two-wheeler engine by ultrasonic atomization,” presented at the SETC2015: 21st Small Engine Technology Conference, SAE Technical Paper 2015-32-0757, Osaka, Japan, 2015.
Balasubramanian, N., Bakshi, S., and Anand, T.N.C., “Fuel injection rate measurement of gasoline direct injection (GDI) injectors,” presented at the ICLASS-2015, 13th Triennial International Conference on Liquid Atomization and Spray Systems, Tainan, Taiwan, 2015.
Somasundaram, S., Anand, T.N.C., and Bakshi, S., “Experimental studies on internal circulation during droplet evaporation,” presented at the ILASS-Europe 2013, 25th European Conference on Liquid Atomization and Spray Systems, Chania, Greece, 2013.
Jain, S. and Anand, T.N.C., “Experimental studies on carburetors,” presented at the 16th Annual Conference of ILASS-Asia, Nagasaki, Japan, 2013.
Ajay, M. and Anand, T.N.C., “Study of ultrasonic atomization,” presented at the 16th Annual Conference of ILASS-Asia, Nagasaki, Japan, 2013.
Ranjan, A., Chakravarthy, S.R., Anand, T.N.C., and Mehta, P.S., “Diagnostics of Incylinder Flow during Compression using PIV and Analysis using Proper Orthogonal Decomposition,” presented at the COMODIA 2012, 8th International Conference on Modeling and Diagnostics for Advanced Engine Systems, Fukuoka, Japan, 2012.
Madan Mohan, A., Anand, T.N.C., and Ravikrishna, R.V., “Experimental spray characterisation of air-assisted impinging jets,” presented at the ICLASS-2012, 12th Triennial International Conference on Liquid Atomization and Spray Systems, Heidelberg, Germany, 2012.
Madan Mohan, A., Anand, T.N.C., Deshmukh, D., and Ravikrishna, R.V., “Air-assisted Impinging Jet Spray Characterization of Pongamia Pure Plant Oil,” presented at the ILASS-EUROPE 2011, 24th Annual Conference on Liquid Atomization and Spray Systems, Estoril, Portugal, 2011.
Madan Mohan, A., Deshmukh, D., Anand, T.N.C., and Ravikrishna, R.V., “Effervescent Spray Characterization of Jatropha Pure Plant Oil,” presented at the ILASS-EUROPE 2010, 23rd Annual Conference on Liquid Atomization and Spray Systems, Brno, Czech Republic, 2010.
Deshmukh, D., Madan Mohan, A., Anand, T.N.C., and Ravikrishna, R.V., “High Pressure Spray Characterization of Vegetable Oils,” presented at the ILASS-EUROPE 2010, 23rd Annual Conference on Liquid Atomization and Spray Systems, Brno, Czech Republic, 2010.
Anand, T.N.C., Madan Mohan, A., Deshmukh, D., and Ravikrishna, R.V., “Optical characterization of PFI gasoline sprays: Effect of Injection Pressure,” presented at the SETC 2010: Small Engine Technology Conference & Exposition, SAE Technical Paper 2010-32-0067, Linz, Austria, 2010.
Anand, T.N.C. and Ravikrishna, R.V., “Modeling of Fuel Transport in the Intake Manifold of a Single Cylinder Four-Stroke Engine: Carburetion vs. Port Fuel Injection,” in Proceedings of the 18th National & 7th ISHMT-ASME Heat and Mass Transfer Conference, Paper No. HMT- 2006-C204, IIT Guwahati, India, 2006.
Bakshi, S., Anand, T.N.C., and Ravikrishna, R.V., “Computational Studies On Charge Stratification and Fuel-Air Mixing in a New Two Stroke Engine,” in Proceedings of ICEF2005, ASME Internal Combustion Engine Division 2005 Fall Technical Conference, Paper No. ICEF2005-1270, Ottawa, Canada, 2005.
Anand, T.N.C. and Ravikrishna, R.V., “Multi-dimensional, Transient Fluid Flow Simulation in the Intake Manifold of a Single Cylinder Four-Stroke Engine,” in Proceedings of ICEF2005, ASME Internal Combustion Engine Division 2005 Fall Technical Conference, Paper No. ICEF2005-1273, Ottawa, Canada, 2005.