International Journal Publications

Ajeesh, S. S., and Arul Jayachandran, S. (2018). “DSM design of cold-formed steel members using constrained spline finite strip method” International Journal Constructional Steel research., (Under Review)

Ajeesh, S. S., and Arul Jayachandran, S. (2018). “Constrained spline finite strip method for predicting the behaviour of cold-formed steel flexural members with different loading and support conditions” Thin-Walled Structures., (Under Review)

Mashudha Sulthana, U., Arul Jayachandran, S., and Praveena, M. (2018) “Experimental and analytical study of concrete filled hollow steel tubular columns.” International Journal Constructional Steel research, Manuscript JCSR_2018_171. Elsevier, (Under Review)

Mini Koshy and Arul Jayachandran S.(2018), Investigations on the wind uplift behavior of standing seam cold formed steel roofing sheets, Journal of Structural, Engineering, SERC, (in press).

Mini Koshy and Arul Jayachandran S.(2018), Experimental and safety evaluation of cold formed steel standing seam metal roof panels, Practice Periodical on Structural Design and Construction, ASCE, (Accepted for publication).

Ajeesh, S. S., and Arul Jayachandran, S. (2017). “A constrained spline finite strip method for the mode decomposition of cold-formed steel sections using GBT principles” Thin-Walled Structures., 113, 83-93. doi:10.1016/j.tws.2017.01.004

Mashudha Sulthana, U., Arul Jayachandran, S., and Praveena, M. (2017) “Experimental studies on long column concrete filled double skinned steel tubes under axial loading.” Structures, Elsevier, Institution of Structural Engrs UK. (Accepted for Publication)

Ajeesh, S. S., and Arul Jayachandran, S. (2016). “Simplified semi-analytical model for elastic distortional buckling prediction of cold-formed steel flexural members.” Thin-Walled Structures. 106, 420-427. doi:10.1016/j.tws.2016.05.015

Ramalingam, R., and Arul Jayachandran, S. (2016). "Computational framework for mimicking prototype failure testing of transmission line towers". Engineering Structures. 123, 181-191. doi:10.1016/j.engstruct.2016.05.021

VijayaVengadesh Kumar, J., and Arul Jayachandran, S. (2016). “Experimental investigation and evaluation of Direct Strength Method on beam-column behavior of uprights.” Thin-Walled Structures. 102, 165–179. http://dx.doi.org/10.1016/j.tws. 2016.01.018

Ramalingam, R., and Arul Jayachandran, S. (2016). "A computational method for the inelastic postbuckling of steel space structures with bolt slip". International Journal of Structural Stability and Dynamics. (Accepted)

Ramalingam, R., and Arul Jayachandran, S (2015). "Postbuckling behaviour of flexibly connected single layer steel domes". Journal of Constructional Steel Research, 114, 136-145. doi:10.1016/j.jcsr.2015.07.016

Prabha P, Arul Jayachandran S, Saravanan, M. and Marimuthu V, (2011), “Prediction of the tensile capacity of cold formed angles experiencing shear lag”, International journal of Thin Walled structures, Vol.49, pp.1348-1358.

Arul Jayachandran S, Marimuthu V, Saravanan M, Prabha P, “Large deflection and postbuckling behaviour of thin plates resting on nonlinear elastic medium”, International Journal of Structural Stability and Dynamics,, Accepted for publication. 2010.

Lakshmikandhan K.N., Senthil R., Arul Jayachandran S., Sivakumar P. and Ravichandran R. ‘A parametric study on the behaviour of steel and composite space structures’- International Journal of Space Structures, Vol. 25, No. 3, pp. 169-183,2010.

Prabha P, Marimuthu V, Saravanan M, Arul Jayachandran S, “Evaluation Of Connection Flexibility In Cold-Formed Steel Racks”, International Journal of Constructional Steel Research, Volume 66, Issue 7, July 2010, Pages 863-872

Saravanan, M., Arul Jayachandran. S, Marimuthu. V, Prabha. P, “Advanced analysis of cyclic behaviour of plane steel frames with semi-rigid connections”, International Journal of Steel and Composite structures, Vol.9, No.4, pp. 381-395, August 2009

S. Arul Jayachandran, V. Marimuthu, P. Prabha, S. Seetharaman and N. Pandian, "Investigations on the behaviour of semi-rigid endplate connections", International Journal of Advanced Steel construction, Vol.5, No.4, 432-451, 2009.

P. Prabha, V. Marimuthu, S. Arul Jayachandran, S. Seetharaman and N. Raman, "An improved polynomial model for top and seat-angle connection", International Journal of Steel and Composite structures, Vol.8, No.5, 2008.

Arul Jayachandran S., Seetharaman S. and Susan Abraham, “Simple formulation for the flexure of plates on nonlinear foundation”, (TN) International Journal of Engineering Mechanics, ASCE, V. 134, N. 1, January 2008, pp. 110-115.

Arul Jayachandran, Donald W. White “Variable order secant matrix technique applied to the elastic post buckling of arches” ,International Journal of Communications in Numerical Methods in Engineering, Volume 24 Issue 8 ,2008, pp. 701-710

Marimuthu V., Seetharaman S., Arul Jayachandran S., Chellappan A., Bandyopadhyay T.K. and Datta D., “Experimental studies on composite deck slabs to determine the shear-bond characteristic (m-k) values of the embossed profiled sheet”, International Journal of Constructional Steel Research, Vol. 63, No. 6, June 2007, pp.791-803

Arul Jayachandran S. Soundararajan A., Seetharaman S. Samuel Knight G.M.,(2004) “Modulus of core reaction approach to the buckling of sandwich plates”, International Journal of Structural Stability and Dynamics,4(4), December.

Arul Jayachandran, S., V. Kalyanaraman and R. Narayanan (2004) “A co-rotation based secant matrix techique for the postbuckling analysis of truss structures”. International Journal of Structural Stability and Dynamics, 4(1), 1-19(.

Arul Jayachandran, S., V. Kalyanaraman and R. Narayanan (2004) “Maguerre shell type secant matrices for the postbuckling analysis of thin composite shells”, International Journal of Struct. Engg. and Mechanics, Vol.18, No.1, 2004, pp41-58.

Arul Jayachandran, S., S. Gopalakrishnan and R. Narayanan (2003) Improved secant matrices for the postbuckling analysis of thin composite plates. International Journal of Structural Stability and Dynamics, 3(3), 355-37.

Alagusundaramurthy P. Arul Jayachandran S. Sundaravadivelu P (2003) Stability of stiffened plates, Journal of Engg. Mechanics, ASCE, Vol.129, No.7, pp 751-758.

Arul Jayachandran, S., S. Gopalakrishnan and R. Narayanan (2001) “Explicit incremental matrices for the postbuckling analysis of thin plates with small initial curvature”. International Journal of Struct. Engg. and Mechanics, 12(3), 283-295.

Arul Jayachandran S., C.V.Vaidyanathan (1999) “Post critical behaviour of biaxially compressed plates on elastic foundation” International Journal of Computers and Structures, Vol.54, No,2, Jan. (1995), pp-239-246.

Vaidyanathan C.V., Arul Jayachandran S.," Plates on Elastic Foundation", (Dis. Paper) Journal of Structural Engineering, ASCE, Vol. No. 117, May 1991.

top

Refereed National Journal Publications

Saravanan, M.; Marimuthu, V.; Sharmila S. and Arul Jayachandran, S. (2018), “Distortional Buckling Strength of Cold-Formed Steel Beam under Flexure”, National journal of Structural Engineering. (Accepted)

Mini Koshy and Arul Jayachandran S.,(2017) Investigations on the wind uplift behaviour of standing seam cold formed steel roofing sheets, Journal of Structural Engineering, SERC, (in press).

Ajeesh, S. S., and Arul Jayachandran, S. (2017). “Amendment schemes for cubic end splines used in structural analysis.” Journal of Structural Engineering (CSIR-SERC, India)., 43, 539-546.

Marimuthu, V. Saravanan M. Prabha, P. S.Sabareshwaran and S. Arul Jayachandran, (2012), “Numerical studies on the behaviour of intermediate length cold formed steel lipped channel compression members”, National journal of Structural Engg. Vol. 39, No. 1, pp. 15-19

Prabha P, Marimuthu V, Saravanan M, Arul Jayachandran S, Pandian N, Poornima L.M^†, Angeline Prabhavathy R, “A Polynomial Equation For Pallet Rack Boltless Connections”, INSDAG’s Steel in Construction, January 2010 (Accepted for publication).

Lakshmikandhan K.N., Senthil R., Arul Jayachandran S., Sivakumar P. and Ravichandran R. ‘Comparative study on steel and concrete composite space structures’, Journal of Structural Engineering-A National refereed journal, 2010, (Accepted for Publication).

N.Umamaheswari, S.Arul Jayachandran, M.Lakshmipathy (2009),’Evaluation of AISC(2005)Design Procedure for circular Steel-Concrete Composite columns’, INSDAG’s Steel in Construction,July,Vol.10,No.2,pp 01-04.

N.Umamaheswari, S.Arul Jayachandran, M.Lakshmipathy (2009),’Comparison of axial strength of Square and Circular short composite columns’, INSDAG’s Steel in Construction, Jan, Vol.10, No.1,pp 51-55.

Lakshmikandhan K.N., Senthil R., Arul Jayachandran S., Sivakumar P. and Ravichandran R. (2009), ‘Study on the effect of concrete slab on the behavior of steel space structure’, Steel in Construction, INSDAG, Vol. 10, No. 1, pp. 1-12.

S.Sharmila, N.Shanmuga Sundari, S.Arul Jayachandran, P.Prabha, V.Marimuthu, M.Saravanan and N. Pandian, “Comparative study on strength of cold formed lipped channel columns”, INSDAG’s Steel in Construction, January 2009.

S.Sharmila, N.Shanmuga Sundari, S.Arul Jayachandran, P.Prabha, V.Marimuthu, M.Saravanan and N. Pandian, “Comparative study on the strength of cold formed tension members”, INSDAG’s Steel in Construction, January 2009.

Prabha, P., Seetharaman, S., Arul Jayachandran, S., Marimuthu, V. and Pandian, N., ‘Parametric studies on bolted end plate connections’, , INSDAG’s Steel in Construction’, Vol. 9, No.2, July 2008, pp.17-25

Sharmila S., Poongodi L., Arul Jayachandran S., Seetharaman S., Marimuthu V., and Prabha P, “Comparative study on methods of section property calculations for cold-formed steel members”, Steel In Construction, INSDAG, January 2008

Arul Jayachandran S., Samanta A.K and Seetharaman S., “Customization of steel products – A must in the present economic scenario” Steel in Construction, INSDAG, January 2008

Vengadeswaran,M., Arul Jayachandran, S., Seetharaman, S., Nagapadmaja, P., Marimuthu V. and Pandian N., ‘Design of beam to column bolted end plate connections’, INSDAG’s Steel in Construction’, Vol. 8, No.1, January 2007, pp.13-24

Sundaramagalingam, A., Arul Jayachandran, S., Seetharaman, S., Marimuthu, V., Nagapadmaja P. and Pandian N. ‘Parametric studies on the design of steel tension members’, INSDAG’s Steel in Construction’, Vol. 8, No.1, January 2007, pp.1-11

Arul Jayachandran S., Raman N, Seetharaman S. and Karisiddappa, “Parametric studies on the effect of semi rigid connections on the P-∆ behaviour of steel frames, INSDAG’s Steel in Construction, Vol. 7, No.1, January 2006, pp. 25-36.

Pandian N. Arul Jayachandran S., Seetharaman S. Structural efficiencies of new wide flanged sections compared with the existing rolled sections, Steel in Construction, Vol.5, No.1, 2004, pp 1-11

Arul Jayachandran S., Seetharaman S., and Kishore I.V.K., “Semi-Rigid Connections in Steel Frames - A Note for the Designers of Structural Steelwork” , INSDAG’s Steel in Construction Journal, Vol. 5, No.1, January 2004 pp. 57-63.

Pandian N., Arul Jayachandran S. Seetharaman S and Kad Vasanthi Limit state design of cold formed steel construction members – codal comparisons, Journal of structural Engg., Vol.30, No.3, 2003,pp173-178.

Seetharman S. Pandian N. and Arul Jayachandran S., Concept of life cycle cost analysis, Steel in construction. Vol.4, No.1, Jan.2003, pp25-46

Arul Jayachandran S. and Seetharaman S., Increasing per capita consumption of steel in India – Structural Engineer’s perspective, Steel in Construction, Vol.3, No.2, July 2002, pp.31-39.

Arul Jayachandran S. Seetharaman S., Narayanan R., “Towards making steel a competitive construction material in India – need for revision of codes of practice and steel sections”, Steel in Construction, Vol.2, No.2, July 2001, pp,71-82

Un-Refereed National Journal Publications for Designers

Arul Jayachandran S., Raman N., “Limit state design of steel tension members as per BS: 5950 Part-I-2000”, Master Builder, June 2006, pp29-32

Arul Jayachandran S., Raman N., “Limit state design of steel compression members as per BS: 5950 Part-I-2000”, Master Builder, July 2006, pp 31-37.

Arul Jayachandran S., Raman N., “Design of laterally unrestrained steel beams using BS: 5950-2000”, Master Builder, Sep 2006, pp 105-108.

Arul Jayachandran S., Raman N., “Design of steel restrained beams as per BS:5950-2000”, Master Builder, March 2007, pp 98-108.

Arul Jayachandran S., Raman N., Seetharaman S. and Karisiddappa, “P-Δ effects in the design of steel frames- Comparative study of the new Revised IS: 800 and BS 5950-Part 1-2000”, Masterbuilder, March-April 2005.

Arul Jayachandran S., Pandian N., Seetharaman S. Pre-engineered cold formed steel structural systems for buildings, The Master builder, April-May, 2002, pp36-42.

top

International Conference Publications

Jain, Rakhi and Arul Jayachandran, S. (2015). “Linear Behaviour of thin walled open sections using GBT.” Proc., International conference on Civil, Structures and Transportation Engineering (ICCSTE), University of Ottawa, Canada.

Ajeesh, S. S., and Arul Jayachandran, S. (2015). “Static and buckling analysis of plates using spline finite strip method with modified amending schemes.” Proc., The 2015 World Congress on Advances in Structural Engineering and Mechanics (ASEM15), Incheon, Korea, (ICSCS 15).

Mashudha Sulthana, U., Arul Jayachandran, S., and Praveena, M. (2015). “Experimental studies on CFDST sections under axial loading.” Proc., 11th Int. conference on Advances in Steel and Concrete Composite Structures, Beijing, China, 268-273.

Ajeesh, S. S., and Arul Jayachandran, S. (2015). “Distortional buckling in cold-formed steel members- A review.” Proc., Third International Conference on Modelling & Simulation in Civil Engineering, TKM College of Engineering, Kollam.

Vijaya Vengadesh Kumar, J., and Arul Jayachandran, S. (2013). “Direct Strength Method of Design for Concentrically Loaded Perforated Rack Columns.” Proc., The 10th Pacific Structural Steel Conference, R. J. Y. Liew and S. C. Lee, eds., Research Publishing, Singapore, 212–217. doi: 10.3850/978-981-07-7137-9_266

Ramalingam, R., and Arul Jayachandran, S. (2013). "Postbuckling Behaviour of Reticulated Shells with Connection Semi-Rigidity". Proc., 10th Pacific Structural Steel Conference, (Eds.) Liew, R.J.Y., and Lee, S.C., Singapore.

Prabha P, Marimuthu V, Saravanan M, Arul Jayachandran S and Pandian N, “Finite element simulation of connection behaviour of pallet racks”, International Conference on Advances in materials and techniques in Civil Engineering ICAMAT-2010”, VLB. Janakiammal College of Engineering and Technology, Coimbatore, Jan 7-9^th, 2010, pp. 207-211.

Saravanan M, Marimuthu V, Prabha P, Arul Jayachandran S, Pandian N and Kumar J, “Experimental investigation on cold formed lipped channel beams”, International Conference on Advances in materials and techniques in Civil Engineering ICAMAT-2010”, VLB. Janakiammal College of Engineering and Technology, Coimbatore, Jan 7-9^th, 2010, pp. 295-301.

Karthikeyan G, Saravanan M, Suprakash Biwas, Pandian N, Arul Jayachandran S, Marimuthu V and Prabha P, “Seismic evaluation of cold formed steel pallet racks”, International conference on advances in mechanical and building sciences in the 3 rd millenium - ICAMB 2009, Vellore Institute of Technology, Vellore, Dec 14-16, 2009, pp. 1696-1702.

N.Umamaheswari, S.Arul Jayachandran, M.Lakshmipathy (2009),’Effect of concrete confinement on axial strength of circular concrete-filled steel tubes’, Proceedings of 9^th International Conference on “Steel-Concrete Composite and Hybrid Structures”, ASCCS2009, University of Leeds, LEEDS,UK,08-10 July ,pp 271-278

Arul Jayachandran S., Marimuthu V., Prabha P, Marimuthu V, Seetharaman S. and Sundaramahalingam S,, “Evaluation of design provisions for eccentrically loaded channel tension members” Fifth International conference in Advances in Steel Structures ICASS-07, National University of Singapore, Dec.5-7,2007, pp. 407-412.

Arul Jayachandran S., and Donald White, “Secant Matrices for the Second Order Elastic Analysis of Plane Steel Frames” Fifth International conference in Advances in Steel Structures ICASS-07, National University of Singapore, Dec.5-7, 2007, pp. 413-418.

Arul Jayachandran S., Kalyanaraman V, Narayanan R., “ A higher order total Lagrangian solution for the large deformation analysis of beams and frames”, Proceedings of the International Conference on Mathematical Modelling, Roorkee, Tata McGraw Hill, Jan.(2001).pp 911-921.

Arul Jayachandaran S., Seetharaman S., Narayanan R. and Hema S., “ A review of Indian standard rolled I-beams in the light of a possible revision of IS:800(1984) to limit state format”, Int. Conference on challenges before the manufacturing sector (COMIM-2000), Ranchi, Feb.3-4,2000.

Arul Jayachandran S., Vaidyanathan C.V., Appa Rao T.V.S.R., “Prediction of collapse loads of thin plates under compression", International Conference on Stability of Structures, Coimbatore, June -1995.pp 817-827.

Alagusundaramoorthy P., Arul Jayachandran S., Sundaravadivelu R., "Stability of stiffened panels with cutouts and initial imperfections" ,1993 Conf. of the Kansai Society of Naval Architects, Osaka,Japan.(1993)

top

National Conference Publications

Ajeesh, S. S., and Arul Jayachandran, S. (2016). “TWLIGHT-IITM- A computational utility for elastic buckling stress predictions of cold-formed steel elements.” Proc., 10th Structural Engineering Convention (SEC 2016), CSIR-SERC, Chennai, India.

Ramalingam, R and Arul Jayachandran, S. (2014). "Stability considerations in design of reticulated shells". Proc., 9th Structural Engineering Convention (SEC 2014), (Ed.) Matsagar, V., Delhi, India.

Ajeesh, S. S., and Arul Jayachandran, S. (2014). “Analytical Predictions for distortional buckling of cold-formed steel flexural members.” Proc., 9th Structural Engineering Convention (SEC 2014), (Ed.) Matsagar, V., Delhi, India.

Jain, Rakhi and Arul Jayachandran, S. (2014). “Determination of rigid and distortional mode shapes using Generalized Beam Theory for cold-formed steel sections.” Proc., 9th Structural Engineering Convention (SEC 2014), (Ed.) Matsagar, V., Delhi, India.

P. Prabha, S. Arul Jayachandran, V. Marimuthu, M. Saravanan, and N. Pandian, “Flexural Behaviour of Cold-Formed Steel C-sections”, Proceeding of the sixth Structural Engineering Convention SEC 2008, SERC Chennai, pp. 679-685, 18-20 Dec 2008.

V. Marimuthu, S. Arul Jayachandran, P. Prabha, M. Saravanan and N. Pandian, “Numerical Studies on Extended Endplate Connections Under Cyclic Loading”, Proceeding of the sixth Structural Engineering Convention SEC 2008, SERC Chennai, pp. 733-740, 18-20 Dec 2008.

M. Saravanan, S. Arul Jayachandran, V. Marimuthu, P. Prabha and N. Pandian, “Modeling issues on cyclic behaviour of semi-rigid steel frames”, Proceeding of the sixth Structural Engineering Convention SEC 2008, SERC Chennai, pp. 779-787, 18-20 Dec 2008.

L.M.Poornima, N.Pandian, R.Angeline Prabhavathy, S.Arul Jayachandran, P.Prabha, M.Saravanan and V.Marimuthu, “Numerical Investigation on Cold-Formed Steel Pallet Rack Connections”, National Conference in Advances and Innovations in Civil Engineering, AICE’2009, Mepco Schelnk Engineering College, March 25th 2009, pp. 375-378.

Marimuthu V., Anoop Baby, Seetharaman S., Arul Jayachandran S., Prabha P. and Pandian N., ‘Experimental investigation on extended end plate connections under cyclic loading’, Proceedings of the National Conference on Recent Advances in steel and concrete construction 22-24 January 2008, St. Peter’s Engineering College, Avadi, Chennai – 54, pp.148-157.

Vimal Mohan Kalappa, M.S. and Arul Jayachandran, ‘Numeical investigations on axial compression behaviour of cold formed steel uprights’, Proc. of the National Conference on Advancement in Steel Concrete Composite Construction, Hindustan University, Chennai, April 2008 (in CD format)

Karthikeyan, M.D., Thenmozhi, R. and Arul Jayachandran, S., ‘Finite element modeling of steel frames with simulated load’, Proc. of the National conference on Advancement in Steel Concrete Composite Construction, Hindustan University, Chennai, April 2008 (in CD format)

Seetharaman S., Arul Jayachandran S., Prabha P., Marimuthu V. and Pandian N., “Experimental investigations on the ultimate strength behaviour of end-plate bolted connections”, presented at the Theme Meeting on Modern Developments and Practices in Mechanical Testing of Structural Materials, held at BARC, Mumbai during October 10-11, 2007. pp.

Prabha P., Seetharaman S., Arul Jayachandran S., and Marimuthu V., “Mimicking expensive experiments using ABAQUS”, Third Abaqus User’s India meet 2007, Bangalore, October 24^th2007.

Anoop Baby, Jayashree Ramanujan, Seetharman S., Arul Jayachandran S., Prabha P and Marimuthu V., “ Behaviour of extended end plate connections under cyclic loading – a review “, Second National Conference on Materials and Structures (MAST), Dec.14-15, 2007, National Institute of Technology, Warangal.

Anoop Baby, Jayashree Ramanujan, Seetharman S., Arul Jayachandran S., Prabha P and Marimuthu V., “ Finite element analysis of extended end plate connections using ABAQUS“, Seventh National Conference on Technical Trends, Nov.30-Dec-01, 2007, College of Engineering, Thiruvanathapuram.

Nagapadmaja, P., Venkadeswaran, M., Arul Jayachandran,S., Seetharaman, S., Marimuthu V. and Pandian N.,’ Studies on bolted end-plate connections’ Proceedings of the National Seminar on Modern Trends in Structural Engineering and Construction Practices, Chennai, March 2007, pp.231-236

Marimuthu, V., Seetharaman, S., Arul Jayachandran, S. and Nagapadmaja, P., ‘Some considerations for design of steel-concrete composite deck slabs – A proposal for Indian code’, Proceedings of the National Seminar on Modern Trends in Structural Engineering and Construction Practices, Chennai, March 2007, pp.204 -212

Prabha, P., Nagapadmaja, P., Seetharaman, S., Arul Jayachandran, S., Marimuthu V. and Sivagurunathan B, ‘Finite element evaluation of top- and seat-angle connection with reference to new revised is: 800’, Proceedings of the National Seminar on Modern Trends in Structural Engineering and Construction Practices, Chennai, March 2007, pp.198-203

Prabha P., Nagapadmaja P., Seetharaman S., Arul Jayachandran S., Marimuthu V. and Sivagurunathan B., Finite element analysis of top-and seat-angle with double web-angle bolted connections, National Conference on Recent Trends in Concrete Composites for Structural Systems, RTCCSS’07, Kongu Engineering College, Perundurai, March 14 and 15 , 2007, pp. 335-340.

Arul Jayachandran S., Seetharaman S., Pandian N. and Lakshmanan N. “Cold-formed steel systems for residential buildings”, Invited paper, India-Australia Workshop on cold-formed steel structures, IIT Madras, January 19-20, 2006.

Durai Bango S., Senthil.R, Seetharaman.S, Arul Jayachandran S., and Marimuthu V., "Types and modelling of semi rigid connections in steel frames", Paper presented at the National Conference on Innovative Technologies in Civil Engineering held at CIT, Coimbatore during March 20-21, 2006.

Arul Jayachandran, S., Soundararajan, A., Seetharaman, S. and Samuel Knight, G.M., “Computation of buckling Loads for Steel sandwich plates”, All India Seminar on Structural Steel for Construction Industry, National Institute of Technology , Rourkela, January 24-25, 2004, pp.157-166.

Seetharaman S., Pandian N. and Arul Jayachandran S.,’ Advanced analysis techniques for steel frames – An overview, Proceedings of the Structural Engineering Convention (SEC) 2003, Indian Institute of Technology, Kharagpur, December 12-14, 2003, pp. 85-95.

Arul Jayachandran S., Soundararajan A. and Seetharaman S.,’ Large deflection of laminated composite facings resting on soft core media’, Proceedings of the National Seminar on Emerging trends in structural mechanics and composites’, National Institute of Technology , Rourkela, November 1-2, 2003, pp.358-367.

Arthi N., Arul Jayachandran S. and Seetharaman S., ‘Numerical analysis of semi-rigid sway frames using Gauss-Siedel iterations’, Proceedings of the All India Seminar on Modern Trends in Steel Structures, Nagpur, Feb. 8-9, 2002, pp. 57-65.

Arul Jayachandran S. and Seetharaman S., ‘Inelastic postbuckling behaviour of truss systems’, Proceedings of the All India Seminar on Modern Trends in Steel Structures, Nagpur, Feb. 8-9, 2002, pp. 109-116.

Anandavalli N., Arul Jayachandran S. and Vaidyanathan C.V., “ Finite element programming using ‘C’ array implmentation”, Proc. National Symposium on the impact of computers and information technology in civil and structural engineering, August(2001), Karunya Inst. of Tech., pp 62-72

Arul Jayachandran, S., Pandian, N., and Seetharaman, S., ‘Cold-formed steel structural systems for fast track construction’, Proceedings of the Seminar on Pre-engineered Building System Design for Fast Track Construction, Chennai, December 2000.

Arul Jayachandran S., Vaidyanathan C.V., " A Total Lagrangian form of Co-rotational procedure in geometric non-linear analysis", National Symposium on Advances in Structural Mechanics, IISc, Bangalore,June 1994.

Arul Jayachandran S., Vaidyanathan C.V., " Comparative Studies on Simplified models for the seismic analysis of building frames", Proceedings of the Tenth Symposium on Earthquake Engg., Nov.1994, Roorkee

Arul Jayachandran S., Vaidyanathan C.V.,"Free Vibration of Plates resting on Vlazov two parameter Foundation", Paper presented at the Symposium on Advances in Structural Dynamics',I.I.T., Madras. (December -1993)

Arul Jayachandran S, L.N. Ramamurthy, " Postbuckling response of imperfect elastic plates - A total lagrangian finite element approach" , Recent Advances in Steel Structures, Ed. V.Kalyanaraman, Tata McGraw Hill Co.,(1990).

top

Technical Reports

Marimuthu, V., M., Pandian, N., Arul Jayachandran, S., Saravanan, M. and Prabha, P., ‘Experimental investigation on distortional buckling of cold formed steel lipped channel members, SERC Research Report No. OLP 14541/3, Oct 2009.

Saravanan, M., Pandian, N., Arul Jayachandran, S., Marimuthu V., and Prabha, P., ‘Investigations on composite deck slabs using profiled sheets with embossments’, SERC Research Report No. OLP 14541/4, Nov. 2009

Prabha, P., Pandian, N., Arul Jayachandran, S., Marimuthu V. and Saravanan, M., ‘Numerical investigations on semi-rigid connections of pallet racks, SERC Research Report No. OLP 14541/5, Oct 2009.

Saravanan, M., Pandian, N., Arul Jayachandran, S., Marimuthu V., and Prabha, P., ‘Investigations on seismic evaluation of pallet racks’, SERC Research Report No. NWP 03941/1, Oct 2009.

Saravanan, M., Pandian, N., Arul Jayachandran, S., Marimuthu V., and Prabha, P., ‘Evaluation of non-ferrous specimens for thickness and coating’, SERC Research Report No. TSP 5397, June 2009.

Arul Jayachandran, S., Marimuthu, V., Prabha, P., Saravanan, M. and Kumarappan, M., ‘Structural modifications and strengthening of columns S10R and S11R at Bhusawal 500 MW boiler supporting structure, Report on Consultancy Project No.CNP 6264, October 2009

Arul Jayachandran, S., Marimuthu, V., Prabha, P., Saravanan, M. and Kumarappan, M., ‘To carry out design adequacy checks of three types of steel support columns/trestles to support flare pipes of 36" OD, Report on Consultancy Project No.CNP 6260, October 2009

Marimuthu, V., Seetharaman, S., Arul Jayachandran, S., Saravanan, M. and Prabha, P., ‘Proof checking of bunker building including bunker of 1x195 MW Kota Super Thermal Power Station, Unit # 7, Stage V’, Report on Consultancy Project No.CNP 6010, January 2009

Saravanan, M., Marimuthu, V., Arul Jayachandran, S., Prabha, P.., ‘Evaluation of m-k values for composite deck slabs using profiled sheets with embossments’, Report on Consultancy Project No. CNP 621841, July 2009.

Marimuthu, V., Seetharaman, S., Arul Jayachandran, S., Saravanan, M. and Prabha, P., ‘Proof checking of mill building at stage v, unit vii, 1x195 MW power house of Kota super thermal power station’, Report on Consultancy Project No.CNP 6016, January 2009

Arul Jayachandran, S., Prabhakar, J., .Saravanan, M., .Marimuthu, V., Prabha, P. and Balagopal, G., ‘Inspection and strengthening measures for equipment supporting column at CNC tool room’, Report on Consultancy Project No.CNP 6229, January 2009.

Saravanan, M., Marimuthu, V., Arul Jayachandran, S., Prabha, P. and Kumarappan, M., ‘Assessment of integrity of conveyer, ESP and boiler supporting structures to APGENCO’, Report on Consultancy Project No. CNP 621841, December 2008

Marimuthu, V., Arul Jayachandran, S., M. Saravanan and P. Prabha, ‘Proof checking of the mill building of 2 x 250 MW unit 1 & 2 (Stage I) thermal power plant at Chhabra’, Report on Consultancy Project No.CNP 6050, October 2008

Arul Jayachandran, S., Marimuthu, V., Prabha, P., Saravanan, M. and Kumarappan, M., ‘Stability audit and identification of rehabilitation measures for ESP supporting steel structures at TPS II, Report on Consultancy Project No.CNP6207, October 2008

Saravanan, M., Pandian, N., Arul Jayachandran, S., Marimuthu V. and Prabha, P., ‘Experimental investigation and verification studies on cold formed steel single angle tension members’, SERC Research Report No. OLP 14541/2, March 2009

Prabha, P., Pandian, N., Arul Jayachandran, S., Marimuthu, V. and Saravanan, M., ‘Numerical and experimental investigation on short cold formed steel pallet uprights’, SERC Research Report No. OLP 14541/1, December 2008

Seetharaman S., Arul Jayachandran S., Marimuthu V. and Nagapadmaja P.,”Proof checking of 2x250 MW Unit 1&2 Power House Building ar Chhabra Thermal Power Station, Report Submitted to M/s Punj Lloyd Limited, New Delhi, CNP 6005, January 2008.

Seetharaman S., Pandian N., Arul Jayachandran S., Marimuthu V. and Prabha P., “ Cyclic behaviour of steel frames with semi rigid connections”, SERC Research Project OLP 12341/14, May 2008.

Seetharaman S., Pandian N., Arul Jayachandran S., Marimuthu V. and Prabha P., “ Rigid connections in steel frames”, SERC Research Project OLP 12341/15, May 2008.

Prabha P., Seetharaman S., Pandian N., Arul Jayachandran S. and Marimuthu V.,” Moment-rotation models for semi rigid connections in steel frames” SERC Research Project OLP 12341/16, May 2008.

Pandian N., Arul Jayachandran S., Seetharaman S., Marimuthu V. and Prabha P.,” A comparative study of design of an eight storey building using IS: 800-2007 and AISI”, SERC Research Project OLP 12341/17, May 2008.

Arul Jayachandran S., Marimuthu V., Prabha P., Pandian N. and Seetharaman S., “Advanced analysis and prototype testing of steel frames”, SERC Research Project OLP 12341/18, May 2008.

S. Seetharaman, N. Pandian, S. Arul Jayachandran, V. Marimuthu and P. Prabha, “ Analytical investigations on extended end plate beam column connections under static and cyclic loading, OLP 12341/19, May 2008

Seetharaman S., Pandian N., Arul Jayachandran S., Marimuthu V., and Prabha P., ‘Finite element analysis of steel plane frame including connections’, SERC Research Project No.OLP 12341/12, November 2007.

Seetharaman S., Pandian N., Arul Jayachandran S., Marimuthu V., and Prabha P., ‘Experimental investigations on extended endplate connections under cyclic loading’, SERC Research Project No.OLP 12341/13, November 2007.

Nagapadmaja P., Marimuthu V., Seetharaman S., Arul Jayachandran S., ‘Proof checking of the mill building at stage IV, unit VI, 1X250 MW power house of Suratgarh thermal power station, Report on Consultancy project No. CNP 997, September 2007.

Nagapadmaja P., Marimuthu V., Seetharaman S., Arul Jayachandran S., ‘Proof checking of the power house building at stage V, unit VII, 1X195 MW power house of Kota super thermal power station, Report on Consultancy project No. CNP 6016, July 2007.

Nagapadmaja P., Marimuthu V., Seetharaman S., Arul Jayachandran S., ‘Proof checking of the main building at stage IV, unit VI, 1X250 MW power house of Suratgarh thermal power station, Report on Consultancy project No. CNP 996, June 2007.

Seetharaman, S., Pandian, N., Arul Jayachandran, S., Marimuthu, V. and Nagapadmaja, P., ‘Finite element analysis of plane frames with semi-rigid bolted beam column connections’, SERC Research Project No.OLP 12341/11, May 2007

Seetharaman, S., Pandian, N., Arul Jayachandran, S., Marimuthu, V. and Nagapadmaja, P., ‘Finite element analysis of end-plate bolted beam column connections’, SERC Research Project No.OLP 12341/10, May 2007

Seetharaman, S., Pandian, N., Arul Jayachandran, S., Marimuthu, V. and Nagapadmaja, P., ‘Finite element analysis of semi-rigid bolted beam column connections’, SERC Research Project No.OLP 12341/9, May 2007

Seetharaman, S., Arul Jayachandran, S., Marimuthu, V. and Nagapadmaja, P., ‘Evaluation of loading on bunker supporting steel structure at Aarti Steels Pvt. Ltd.’, Report on consultancy Project No. CNP 961, May 2007

Seetharaman S., Arul Jayachandran S., Marimuthu V. and Nagapadmaja P., ‘Structural adequacy of existing refinery-1 pipe rack to take additional pipe lines’, Report on Consultancy Project No. CNP 6030, May 2007

Seetharaman, S., Arul Jayachandran, S., Marimuthu, V. and Nagapadmaja, P., ‘Proof checking the structural designs of prefabricated structural canopies for petrol pumps’ , Report on Consultancy Project No. CNP 989, March 2007

Seetharaman, S., Arul Jayachandran, S., Marimuthu, V., Nagapadmaja, P., ‘Proof checking of 330 MWe gas-based combined cycle power plant’, Report on Consultancy Project No. CNP 907, January 2007

Vengadeswaran M., Arul Jayachandran S., Nagapadmaja P., Marimuthu V., Pandian N. and Seetharaman S., “Design of steel beam to column endplate connections”, SERC Research Report OLP 12341/3, March 2006.

Seetharaman S., Pandian N., Arul Jayachandran S., Marimuthu V. and Naga Padmaja P., “Analytical and experimental investigations on steel building frames and connections – A state-of-the-Art”., SERC Research Report OLP 12341/2, March 2006.

Seetharaman, S., Arul Jayachandran, S., Marimuthu, V. and Nagapadmaja, P., ‘Structural adequacy of supporting frame structure to take higher size pipe assembly’, Report on Consultancy Project No. CNP 974, November 2006

Rameshkumar V., Seetharaman S., Pandian N., Arul Jayachandran S., Marimuthu V., Nagapadmaja P., “ Limit state design of steel compression members according to IS: 800-Draft , SERC Research Project OLP 12341/4, July 2006.

Rameshkumar V., Seetharaman S., Pandian N., Arul Jayachandran S., Marimuthu V., Nagapadmaja P., “Limit state design of steel flexural members according to IS: 800-Draft, SERC Research Project OLP 12341/5, July 2006.

Seetharaman S., Arul Jayachandran S., Marimuthu V., Nagapadmaja P., “Proof checking of the design of the bunker supporting structure of Aarti Steels” , Report on consultancy Project No. CNP 94341, June 2006.

Seetharaman S., Pandian N., Arul Jayachandran S., Marimuthu V., Nagapadmaja P., “Experimental studies on parametric behaviour of double web angle connections”, SERC Research Project OLP 12341/6, August 2006.

Seetharaman S., Pandian N., Arul Jayachandran S., Marimuthu V., Nagapadmaja P., “ Experimental studies on parametric behaviour of end plate connections”, SERC Research Project OLP 12341/7, September 2006.

Seetharaman S., Pandian N., Arul Jayachandran S., Marimuthu V., Nagapadmaja P., “ Experimental studies on parametric behaviour of bolted tension members”, SERC Research Project OLP 12341/8, September 2006.

Seetharaman S., Pandian N., Arul Jayachandran S., Marimuthu V., Nagapadmaja P., Prabha P. and Saravanan M. “Analytical and Experimental Investigations on Steel Building Frames and Connections “”, Project Completion report, SERC, September, 2006.

Seetharaman S., Arul Jayachandran S., Marimuthu V., Nagapadmaja P., “Structural adequacy of supporting frame structure to take higher size pipe assembly”, Report on consultancy Project No. CNP 943, November 2006.

Seetharaman, S., Pandian, N., Arul Jayachandran, S., Marimuthu, V., Nagapadmaja, P., Prabha, P. and Saravanan, M., ‘Analytical and experimental investigations on steel building frames and connections’, Project Completion Report No.No.OLP/12341/20, September 2006

Seetharaman S., Marimuthu V., Chellappan A. and Arul Jayachandran S.,” Evaluation of m-k values for composite deck slabs using profiled sheets with embossments”, Report on consultancy project No. CNP 81041, October 2005.

Pandian, N., Seetharaman, S., Arul Jayachandran S., and Marimuthu, V., “An Integrated Limit State Design Program for Plane Frame by Draft IS: 800 Code for Structural Steel Design”, Project Report No. OLP 10041/13, September 2005.

Marimuthu V. and Seetharaman S., “Comparative study of a multi storeyed frame using different design approaches”, Project Report No. OLP 10041/14, September 2005.

Seetharaman S., Pandian N., Arul Jayachandran S. and Marimuthu V., Advanced Analysis and Design Methods for Steel Frames and Experimental Investigation of Steel Frame Connections” Project Completion Report OLP 10041/15, September 2005.

N. Pandian, S. Seetharaman, S. Arul Jayachandran , V. Marimuthu, “A manual for user-friendly software for the limit state design/capacity analysis of hot rolled steel sections proposed by BIS for bending members”, SERC Research Report OLP-10041/11, March 2005.

Arul Jayachandran S., S. Seetharaman, N. Pandian, V. Marimuthu, “Experimental investigations on flexible steel beam to column connections”, SERC Research Report OLP-10041/12, March 2005.

Seetharaman S., Arul Jayachandran S. and Marimuthu V., ‘Investigation and strengthening of the fire affected structure in NCTPS’, Report on Consultancy Project No. 078841, January 2005.

Seetharaman S., Arul Jayachandran S., Marimuthu V., Biju P., Gopalakrishnan S. and Lakshmanan N., ‘ Proof checking of the Design of the Power House Building of Giral Thermal Power Project’, Report on Consultancy Project No. 072641, October 2004.

Arul Jayachandran S., Seetharaman, S. and. Pandian N., “Studies on the behaviour of steel frames with nonlinear connections using the SERC beam element”, SERC Research Report OLP 10041/10, September 2004.

Seetharaman S., Narayanan T., Ravisankar K., Arul Jayachandran S., Parivallal S., Kesavan K. and Sreeshylam P., ‘Strength and stability check of the 80 T gantry Crane at NLC, Neyveli”, Report on Consultancy Project No. CNP 72741, September 2004.

Pandian, N., Seetharaman, S., and Arul Jayachandran S., “An Integrated Limit State Design Program for Plane Trusses by Draft IS: 800 Code for Structural Steel Design”, SERC Research Report OLP 10041/9, August 2004.

Seetharaman S. and Arul Jayachandran S., “Proof Checking of the design of truss structure for Bagasse shed”, Report on Consultancy Project No. CNP 73841, August 2004.

Seetharaman S., Pandian N., Mohan S.J., Arul Jayachandran S., Raghunathan M.D., Harikrishna P., and Kishore I.P.K.,” Proof checking of design of bunker bay of KTPS, Unit #6, Report on Consultancy Project No. NP 68141, April 2004.

Pandian N., Seetharaman S. and Arul Jayachandran S.,’ Manual for user friendly software for limit state design/capacity analysis of hot rolled steel sections proposed by BIS for compression members’, SERC Research Report No. OLP 10041/7, March 2004.

Arul Jayachandran S., Seetharaman S. and Pandian N.,’ A kinematically exact Euler – Bernoulli beam element for the post buckling analysis of semi-rigid steel frames”, SERC Research Report No. OLP 10041/8, March 2004.

Arul Jayachandran S. “Computational methods for the elastic behaviour of structural systems in the post buckled state”, PhD thesis submitted to I.I.T. Madras, March 2004.

Seetharaman S., Narayanan T., Pandian N., Arul Jayachandran S., Parivallal S., Sreeshylam P. and Kishore I.V.K., ‘Analysis and design of double lane Bailey bridges for different spans’, Report on Consultancy Project No. CNP 62641, October 2003.

Arul Jayachandran S., Seetharaman S and Pandian N., " Bench marking of general purpose FE codes with respect to advanced analysis of steel frames“, SERC Research Report OLP10041/6, September 2003.

Pandian, N., Arul Jayachandran, S., and Seetharaman, S., “A comparison of proposed limit state compressive strength of the planned BIS structural wide flanged sections with the existing sections”, SERC Research Report OLP10041/5, August 2003.

Arul Jayachandran S., Seetharaman S. and Pandian N., “ Post buckling analysis of semi-rigid steel frames with elastic nonlinear connection behaviour”, SERC Research Report, OLP 10041/4, April 2003.

Seetharaman S., Pandian N., Arul Jayachandran S. and Kishore I.V.K.,”Design of supporting structure for conveyor platform at NPK AB train and bagging plant”, Report on Consultancy Project No. CNP 58841, April 2003.

Pandian, N., Seetharaman, S., and Arul Jayachandran, “A Parametric Study Limit State Design Compressive Strength of Hot rolled Members”, SERC Research Report OLP10041/3, March 2003.

Seetharaman S., Pandian N and Arul Jayachandran S., ‘Advanced analysis of steel frames – A state-of-the-art’, SERC Research Report OLP 10041/1, November 2002.

Pandian N., Seetharaman S. and Arul Jayachandran S., “Limit state design strength of bending members - Codal comparison, SERC Research Report OLP 10041/2, November 2002.

Gopalakrishnan S., Seetharaman S. and Arul Jayachandran S., ‘Proof checking of design of canopy for the hi-tech retail outlet at Sriperumbudur’, Report on Consultancy Project No. CNP 0559, July 2002.

Seetharaman S., Umesha P.K., Arul Jayachandran S. and Sundaramoorthi A., “Checking the design of 24 m roof top tower’, Report prepared for M/s. Towercone (I) Designers (P) Ltd., Hyderabad, Report on Consultancy Project No. CNP 04921 41, July 2002.

Seetharaman S., Umesha P.K., Arul Jayachandran S. and Sundaramoorthi A., “Checking the design of 30 m roof top tower’, Report prepared for M/s. Towercone (I) Designers (P) Ltd., Hyderabad, Report on Consultancy Project No. CNP 04913 41, July 2002.

Arul Jayachandran, S., Seetharaman, S., and Pandian, N., ‘Automatic semi-rigid analysis and design of steel frames’, SERC Research Report OLP 08141/14, April 2002.

Seetharaman S., Pandian N. and Arul Jayachandran S., ‘Development of computer-aided software for steel industrial structures’, SERC Research Project Completion Report OLP 08141/15, April 2002.

Pandian N., Seetharaman S., Arul Jayachandran S. and Vasanthi Babasaheb Kad., ‘Limit state design of cold formed steel compression members-Codal comparisons’, SERC Research Report OLP 08141/10, March 2002.

Pandian N., Seetharaman S., Arul Jayachandran S. and Vasanthi Babasaheb Kad., ‘Manual for user-friendly software to determine sectional properties of cold-formed steel structural sections", SERC Research Report OLP 08141/11, March 2002.

Pandian N., Seetharaman S., Arul Jayachandran S. and Vasanthi Babasaheb Kad., ‘Manual for user friendly software for an integrated design of hot rolled sections including limit state design’, SERC Research Report OLP 08141/12, March 2002.

Pandian N., Seetharaman S., Arul Jayachandran S. and Vasanthi Babasaheb Kad., ‘Manual for user friendly software for an integrated design of cold formed sections including limit state design’, SERC Research Report OLP 08141/13, March 2002.

Seetharaman S., Narayanan T., Ravisankar K., Pandian N. Arul Jayachandran S., Anandavalli M. and Bhaskaran R., ‘Design of anchor details for 80 T gantry crane for wind conditions’, Report on Consultancy Project No. CNP 0531, February 2002.

Arul Jayachandran, S., Seetharaman, S., and Pandian, N., ‘Nonlinear static analysis of flexibly connected steel frames’, SERC Research Report OLP 08141/9, November 2001.

Pandian, N., Seetharaman, S., and Arul Jayachandran, S., ‘Development of software for limit state design of frames’, SERC Research Report OLP 08141/8, October 2001.

Pandian, N., Seetharaman, S., and Arul Jayachandran, S., ‘Development of software for analysis and design of trusses by the limit state design approach’, SERC Research Report OLP 08141/7, April 2001.

Seetharaman, S., Lakshmanan, N., Pandian, N., Balajai Rao, K., Arul Jayachandran, S., Anandavali, N., Basakran, R., and Hari Narayanana Murthy, A.V., "Structural Design of Removable/mobile Shelter over Slipway of North Yard", Report on Consultancy Project No. CNP 45141, March 2001.

Teaching Resource for Structural Steel Design’, Vols. 1-3, (hard copy and CD ROM), Report on Sponsored Project No. SSP 04641, July 2001.

Pandian N., Seetharaman S. and Arul Jayachandran S.,’A software for analysis and design of cold-formed steel industrial trusses and frames by matrix method’, SERC Research Report OLP 08141/6, October 2000.

Seetharaman S., Pandian N., Arul Jayachandran S. and Narayanan R., ‘Checking the basic design of jib assembly of 12/8 T ELL crane at Kandla Port Trust’, Report on Consultancy Project No. CNP 39041 May 2000.

Pandian, N., Seetharaman, S., and Arul Jayachandran, S., ‘A user friendly computer software for member capacities and design of hot rolled sections’, SERC Research Report OLP/4, April 2000.

Arul Jayachandran, S., Seetharaman, S., and Pandian, N., ‘Finite element analysis of flexibly connected steel frames’, SERC Research Report OLP 08141/5, April 2000.

Pandian, N., Seetharaman, S., and Arul Jayachandran, S., ‘Development of design software for hot/cold rolled sections for trusses’, SERC Research Report OLP –08141/1, October 1999.

Arul Jayachandran, S., Seetharaman, S., and Pandian, N., ‘Analysis of semi-rigid steel beams and frames using Gauss-Seidel iterations’, SERC Research Report OLP 08141/2 October 1999.

Arul Jayachandran, S., Seetharaman, S., and Pandian, N., ‘Section classification of standard Indian hot rolled beams’, SERC Research Report OLP 08141/3, October 1999.

Arul Jayachandran S., Jayaram N., Pandian N. and Jayaraman R., “Experimental investigations on CFSS members”, OLP 06341-SST-RR-99-11.

Arul Jayachandran S., Jayaram N., Pandian N. and Jayaraman R., “Design aids for typified industrial roof trusses using CFSS sections”, OLP 06341-SST-RR-99.

Arul Jayachandran S., Jayaram N., Pandian N. and Jayaraman R., “Proposal for revision of IS: 801-1975 codal provisions for design using cold formed sections”, OLP 06341-SST-RR-99-12.

Arul Jayachandran S., Jayaram N., Pandian N. and Jayaraman R., “An interactive software for computer aided analysis and design of CFSS Members”, OLP 06341-SST-RR-98-10.

Arul Jayachandran S., Jayaram N., Pandian N. and Jayaraman R., “Behaviour of unstiffened elements of cold formed steel sections”, OLP 06341-SST-RR-97-7.

Arul Jayachandran S., Jayaram N., Pandian N. and Jayaraman R., “Compressive strength of CFSS Members with non-symmetric cross sections”, OLP 06341-SST-RR-97-8.

Arul Jayachandran S., Jayaram N., Pandian N. and Jayaraman R., “Numerically correct nonlinear formulations for the postbuckling analysis of thin elements of CFSS members”, OLP 06341-SST-RR-98-9.

Arul Jayachandran S., Jayaram N., Pandian N. and Jayaraman R., “A review of effective width expression for cold formed steel elements”, OLP 06341-SST-RR-96-1.

Arul Jayachandran S., Jayaram N., Pandian N. and Jayaraman R., “A software for computing sectional properties of CFSS Members”, OLP 06341-SST-RR-96-2.

Arul Jayachandran S., Jayaram N., Pandian N. and Jayaraman R., “Strength Comparison of axially loaded CFSS Compression members”, OLP 06341-SST-RR-96-3.

Arul Jayachandran S., Jayaram N., Pandian N. and Jayaraman R., “CADD for CFSS Compression members”, OLP 06341-SST-RR-96-4.

Arul Jayachandran S., Jayaram N., Pandian N. and Jayaraman R., “Computation of effective widths of cold formed stiffened compression elements using non-linear FEM”, OLP 06341-SST-RR-96-5.

Arul Jayachandran S., Jayaram N., Pandian N. and Jayaraman R., “Strength Comparison of CFSS Bending Members”, OLP 06341-SST-RR-96-6.

Arul Jayachandran S., Vaidyanathan C.V. “Behaviour of Plates on Vlasov Leontiev Foundation and Coupled Winkler Foundation,” Research Report No.RD-24/CAD/RR/92-3, October 92.

C.V.Vaidyanathan and S.Arul Jayachandran “Finite Element Analysis of Floor Systems. Phase I”, Research Report, SERC, March 1991.