Curriculum Vitae of Prof.
M. Kamaraj
Name : Dr. M. Kamaraj
Present
Address : Professor, HAG
E.G. Ramachandran Institute Chair
Department of Metallurgical and Materials Engineering
Indian Institute of Technology, Madras CHENNAI - 600 036, INDIA
Tel. No.
0091-44-22574769/Mobile 9445964269
E-mail: kamaraj@iitm.ac.in; kamaraj@smail.iitm.ac.in
|
Educational Qualifications: |
||
|
S.No. |
Degree |
Institution/University |
|
1 |
Ph.D. |
Metallurgical Engineering (1986
– 1990), IIT Madras |
|
2 |
M.Tech |
Metallurgical Engineering (1984 - 1986) NIT karnataka, Surathkal, |
|
3 |
M.Sc |
Materials Science (1982 - 1984), PSG college of Tech., Coimbatore, India. |
|
Research and Industrial experience |
||
|
S.No |
Position/Role |
Organisation |
|
1 |
R&D Executive |
EWAC R&D, EWAC ALLOYS LTD,
(L&T), Bombay, India 4 years (Oct.1990 - Sept. 1994) |
|
2 |
Research fellow |
Nagaoka
university of Technology, Nagaoka, Japan 1.5 yrs (Oct.1994 - Feb.'96) |
|
3 |
STA
fellow |
National
Institute of Industrial Safety, Tokyo, Japan
1 yr
(March 96 - Feb. 97) |
|
4 |
Guest
Scientist |
Ruhr-University
of Bochum, Bochum, Germany 2 years (May 97- April 99). |
|
5 |
Consultant |
at Coimbatore : 10 moths ( June 99-March 2000) |
|
6 |
Visiting Scientist |
Vikaram
Sarabhai Space Centre, Trivandrum, India.
6 months (April
2000 – September 2000) |
|
7 |
Assistant Professor |
IIT Madras : 5½ years (Oct. 2000- April 2006) |
|
8 |
Associate Professor |
IIT Madras:
April 2006 – Feb.2009 |
|
9 |
Professor |
IIT Madras: March 2009 -till date |
|
Areas o of
Research |
Surface Engineering, Tribology, High
Temperature Deformation of Fe-, & Ni- based alloys with and without
welded joints, power plant materials, Surface engineering, wear behaviour of hydro turbine components, Nano Materials, Failure Analysis of Engineering components |
|
Total Experience |
29 years ( Teaching : 20 Years: Research : 29 Years) |
|
Book
Publications: |
|
|
1 |
Welding : Technology and Design (3rd
edition): V.M. Radhakrishnan and M. Kamaraj
: ISBN: 978-81-224-4046-1
(2019); New Age International Publishers |
|
2. |
Welding the Inconel 718 superalloy: Reduction of Micro-segregation and
Laves Phase; S.G.K Manikandan,
D. Sivakumar and M. Kamaraj, ISBN: 978-0-12-818182-9 (2019)
Elsevier Publications |
|
3 |
Surface Technology: M. Kamaraj and
V.M. Radhakrishnan ISBN: 978-81-224-3960-1 (2015) New Age International Publishers |
|
4 |
Laves Phase in Alloy 718 Fusion Zone,
SGK Manikandan, D Sivakumar, M Kamaraj, Superalloys for Industry Applications, by Sinem Cevik, IntechOpen (2018)
ISBN:978-1-78923-539-5 |
|
5 |
Surface modified biomedical Titanium Alloys:
Aravind Vadiraj and M.Kamaraj ISBN: 978-1-60876-581-2 (2010) Nova science Publishers, Inc., USA |
|
Chapter Contributions: |
|
|
Chapter 1: |
Laves Phase in Alloy 718 Fusion Zone, SGK
Manikandan, D Sivakumar, M Kamaraj, Superalloys for Industry Applications, by Sinem Cevik, IntechOpen (2018)
ISBN:978-1-78923-539-5 |
|
Chapter 3: |
Microstructure and Wear Studies of Alloyed and Austempered Gray Irons for Automotive Applications , Aravind Vadiraj, G. Balachandran and M. Kamaraj ;Advances in Mechanics Research Volume 1 (2010), ISBN: 978-1-61728-109-9 |
|
Chapter 7: |
Laser surface Modification of steel
for slurry erosion
resistance in power
plants R. C. Shivamurthy,
M. Kamaraj, R. Nagarajan, S. M. Shariff and G. Padmanabham Laser
surface modification of alloys for
corrosion and erosion
resistance Ed.by Chi TatKwok Woodhead
publishing (2012); ISBN
978-0-85709-015-7 pp177-287 |
|
2012-2015 |
Head , Metallurgical
and Materials Engineering |
|
2007-2011 |
Advisor Sports |
|
2004-2007 |
Warden |
|
Nuclear Engg |
Course
coordinator |
|
PATENT APPROVAL: |
|
|
Patent: Applied (2018) (under processing) |
High Temperature Oxidation Resistant Nanocrystalline High Entropy Alloys and preparation Method Thereof: Prof. B.S Murty; Dr Daniel Fabijanic, Mr Rahul Bhattacharya, Prof. PeterHodgson, Prof. M.Kamaraj (2018) |
|
Invention: IN-813918: |
Titled “Highly adhesive nano crytalline diamond coatings on tin coated WC-CO (D/TIN /Al203/ TICN/WC) tools for industrial applications”, 2011. |
|
ACADEMIC CONTRIBUTIONS: |
|
|
GUIDANCE |
Ph.D : 26 ; M.S by Research; M.Tech : 19 Post doctoral fellow: 2 |
Awards / Honors
/ Recognition
|
S.No |
Name of
Award/Fellowship etc. |
Elected/Honorary
Fellow |
Awarded
By |
Year of
Award |
|
1 |
FNAE: Fellow
of the Indian
National Academy of Engineering |
Elected
Fellow |
Indian National Academy of Engineering (INAE) |
2021 |
|
2 |
World Ranking of top
2% scientists from India in the field of Metallurgical Engg & Materials, IIT Madras |
NA |
Stanford
University |
2020 |
|
3 |
FIIM : Fellow of
Indian Institute of Metals |
Elected
Fellow |
Indian
Institute of Metals |
2019 |
|
4 |
FASM: ASM
International, USA |
Elected Fellow |
ASM International USA |
2018 |
|
5 |
FIE |
Honorary
Fellow |
The
Institution of Engineers (India) FIE (F-123424-9) |
2017 |
|
6 |
FIWS: |
Honorary
Fellow |
Indian
Welding Society, New Delhi |
2012 |
|
7 |
Certificate of Merit for International Activities |
NA |
Division of Materials and Processing of Japan
Society of Mechanical Engineers |
August 2012 |
|
8 |
Outstanding
Contribution Award |
NA |
ASM
International Chennai Chapter |
2010 |
|
9 |
STA
Post-Doctoral Fellowship |
NA |
Research
development corporation of Japan (JRDC) |
Mar96 -
Feb.97 |
|
10 |
Sudarshan
Bhat Memorial prize : |
- for
the best Ph.D thesis |
Department
of Metallurgical Engineering, IITM |
1990 |
|
Honors/Recognition received : National INTERNATIONAL: |
|
|
2010-2012 |
· National Honorary Fellow
Member by Indian welding
society, New Delhi
(2012) · Certificate of Merit for International Activities by Division of Materials and
Processing of Japan
Society of Mechanical Engineers, August
2012 · Outstanding Contribution Award (2010) by ASM International Chennai
Chapter |
|
Recognition received : BEST POSTERS/BEST PRESENTATIONS |
|
|
2019 |
·
N Ranjan, RC Shende, M Kamaraj, S Ramaprabhu,
“TiO2-gC3N4 nanoadditive for improved tribological performance of vegetable
based oil” at Al Hamra Convention Centre, Ras-Al- Khaimah, U.A.E,
February 23 – 25 2019. -Scholarship for Ms Nisha
Ranjan to attend
IWAM – 2019
at Dubai |
|
2019 |
· N Ranjan, RC Shende, M Kamaraj, S Ramaprabhu,
“Magnesium oxide/Boron Nitride based nanofluids for enhanced heat
transfer application” at International Conference on advanced nanomaterials and nanotechnology (ICANN)
Guwahati, India December 18 – 21 2019. Won best
poster award at ICANN – 2019 from ACS Chemistry of Materials |
|
2018 |
· N Ranjan, RC Shende, M Kamaraj, S Ramaprabhu, “Mechanism of tuning the band gap
of
single step processed Nitrogen doped anatase TiO2” at International
Conference on soft materials – Soft Materials Research Society (ICSM – SMRS) Jaipur, India December 09 – 14 2018.
Won best presentation award at ICSM – 2018 from Soft Materials Research
Society (ICSM) |
|
2015 |
· Ashok Vayyala, Neeta Paulose, S.N.
Narendra Babu, M. Kamaraj, L. Neelakantan,
“Long-term exposure induces internal nitridation of Ni superalloy at
900 ˚C.” NMD ATM 2015, during
13–16th Nov 2015 Coimbatore, India. (Best Oral Presentation Award) |
|
|
|
|
2015 |
· S. Madhavan, M. Kamaraj and L. Vijayaraghavan, Investigation on the mechanical and
microstructural properties of dissimilar Al/Mg welds produced by cold
metal transfer, 2ndInternational conference on Advances in Cutting, Welding
and Surfacing (CWS- 2015) August
5-7,2015, CODISSIA, Coimbatore. (CWS BEST
PAPER AWARD) |
|
2015 |
· Best oral presentation in non ferrous category S.G.K. Manikandan, K.Ganeshpandiyan, P.Manohar, SK.Govindarajan, D. Sivakumar,M. Kamaraj,
Presented manuscript titled
“Solidification studies on Alloy 718 cooled with
liquid nitrogen” in 53rd National Metallurgist Day NMD-ATM
2015 and awarded with best
oral presentation in non ferrous category |
|
2015 |
· First prize : Best poster
presentation: R. C. Shivamurthy, M. Kamaraj, R. Nagarajan, S. M. Shariff and G. Padmanabham, “Effect
of scanning speed and nozzle stand -off distance on laser
surface alloyed martensitic steel” |
|
2014 |
· Best Paper Award for the paper
titled “Use of cold metal transfer welding for low-dilution cladding” authored by P.E. Nandha Kumar, G.D.
Janaki Ram, K. Srinivasa Rao, M.
Kamaraj, during
International Symposium for Research Scholars
2014, 11-13 December- 2014, Indian Institute of Technology Madras, Chennai, India |
|
2014 |
· IWS BEST PAPER AWARD: S. Madhavan, M. Kamaraj
and L. Vijayaraghavan, Investigation on the metal
transfer behavior, interface failure and mechanical properties of dissimilar Al/Steel welds produced by cold
metal transfer, International
Welding Symposium (IWS2K14), Bombay
Exhibition and Convention Centre, October 28-30, 2014, Mumbai. |
|
1994 |
· Science and
Technology Agency (STA) Post-Doctoral Fellowship: National Institute of Industrial Safe
ty, Tokyo, Japan
(Mar96 - Feb.97) |
|
1990 |
·
Sudarshan Bhat Memorial prize : - for the best
Ph.D thesis
in the department of Metallurgical Engineering, IITM (1990). |
|
Referred International Journals |
|
|
185 |
Review on Self-Healing Thermal barrier coatings for space
applications. Manikandan S G K, Kamaraj M and Jebasigamony
C, c, 2021, 10(1), pages 791-818 |
|
184 |
Creep behaviour of Directionally solidified Nickel based
superalloy CM 247: A three-dimensional representation of creep curves. CM
Omprakash, A Kumar, M Kamaraj, DVV Satyanarayana, Transactions of the Indian
Institute of Metals, pages 1-11, 2021. |
|
183 |
Dissimilar welding of Cast Alloy 706 with Different Prior
heat Treatment condition and Austenitic Stainless steel 321, Manikandan S G
K, Baliram Patil and Kamaraj M, Materials Performance and Characterization
11(2), 2021. |
|
182 |
Tribological
analyses of a new optimized gear box biodegradable lubricant blended with
reduced graphene oxide nano particles. S Bhaumik, M Kamaraj, V Paleu, Proceedings of the Institution of
Mechanical Engineers, Part J: Journal of Engineering Tribology, Vol 235,
Issues 5, pages:901-915,2021. |
|
181 |
"Dry Sliding
Wear Behavior of Magnesium Nanocomposites Using Response Surface
Methodology." ASME. J. Tribol. January (2022), Kartheesan, S., Khan,
B. S. H., Kamaraj, M., Tekumalla, S., and Gupta, M. (June
18, 2021). |
|
180 |
Large-scale single-step synthesis of wrinkled N–S doped 3D graphene like nanosheets
from Tender palm shoots for high energy density supercapacitors, SR Mangisetti, M. Kamaraj,
R Sundara, International Journal of Hydrogen Energy, Volume 46, Issue 1, 1 January 2021,
Pages 403-415 2021. |
|
179 |
Utilization of TiO2/gC3 N4 nanoadditive to boost oxidative properties of vegetable oil for tribological application,
N Ranjan, RC Shende, M Kamaraj, S Ramaprabhu, Friction 9(2): 273–287 (2021) |
|
178 |
In situ reduction of graphitic oxide
by amorphization of magnesium diboride for the superior thermo-optical property based
nanofluid applications, N Ranjan, M Kamaraj,
S Ramaprabhu, Materials Today Chemistry, 18 (1),
2020, 100354. |
|
177 |
Structural,
mechanical and tribological investigations of CNT-316 stainless steel nanocomposites processed via spark
plasma sintering, AV Radhamani, HC Lau, M Kamaraj,
S Ramakrishna, Tribology International, 152, 2020,
106524. |
|
176 |
Tribological behavior of graphene-reinforced 316L stainless-steel composite prepared via selective laser melting, A Mandal, JK Tiwari, B
Al Mangour, N Sathish, S Kumar, M Kamaraj, M Ashiq, Srivastava AK, Tribology International, 151, 2020, 106525. |
|
175 |
Artificial neural
network and multi-criterion decision making approach of designing a blend of biodegradable lubricants
and investigating its tribological properties, S Bhaumik, M Kamaraj, Proceedings of the Institution of
Mechanical Engineers, Part J:
Journal of Engineering Tribology, 2020,
1350650120965754. |
|
174 |
On
Characteristic Eutectic free Microstructural Evolution in Hypereutectic Al-Si Processed through Spark Plasma
Sintering, TT Saravanan, M Kamaraj, SC Sharma, S Kumaran, VS Chakravadhanula, KV Ravikanth, KV Kumar, H Sreemoolanadhan,, Materials Letters, 2020, 128150. |
|
173 |
Microstructure
and high temperature mechanical properties of wire arc additively deposited Stellite
6 alloy, GP Rajeev, MR Rahul, M Kamaraj, SR Bakshi, Materialia, 2020,
100724. |
|
172 |
Nano
and micro additivated glycerol as a promising
alternative to existing non- biodegradable
and skin unfriendly synthetic cutting fluids, S Bhaumik, V Paleu, S Sharma,
S Dwivedi, S Borkar, M Kamaraj, Journal
of Cleaner Production, 2020, 121383.Impact factor:6.3 |
|
171 |
Chemically bonded
amorphous red phosphorous with disordered carbon
nanosheet as high voltage cathode for rechargeable aluminium
ion battery, AP Saroja, A Arjunan, M Kamaraj, V Balasubramanian, R Sundara, Journal
of Alloys and Compounds, 2020, 154693. |
|
170 |
Strongly coupled
sulfur nanoparticles on graphene-carbon nanotube hybrid electrode for
multifunctional sodium and
aluminium
ion storage, APVK
Saroja, M Kamaraj, S Ramaprabhu, Journal of Alloys and Compounds, 818, 2020, 152864. |
|
169 |
Facile
synthesis of heteroatom doped and undoped graphene quantum dots as active materials for reversible lithium
and sodium ions storage, APVK Saroja, MS Garapati, R Shyiamala Devi, M Kamaraj, S Ramaprabhu, Applied Surface
Science, 504, 2020, 144430 |
|
168 |
Design
of porous calcium phosphate based gel polymer
electrolyte for Quasi-solid state
sodium ion battery, APVK Saroja, R Arunkumar, BC Moharana,
M Kamaraj, S Ramaprabhu, Journal of Electroanalytical
Chemistry, 2020, 113864. |
|
167 |
Advanced Laser
Based Surface Treatment Techniques to Improve
the Quality of the Products, S Shiva, IA Palani, CP Paul, M Kamaraj, Materials Forming, Machining and Post Processing, 2020, 207 –229 |
|
166 |
A
comparative study on the microstructure and mechanical properties of fusion welded
9 Cr-1 Mo steel, S Madhavan, M Kamaraj, B Arivazhagan, Journal
of Materials Research and Technology,
2019 |
|
165 |
Microstructure,
Mechanical and Corrosion Behaviour of Weld Overlay Cladding of DMR 249A steel with AISI 308L, R
Mohammed, EN Kumar, GDJ Ram, M Kamaraj, GM
Reddy, KS Rao, Materials Today: Proceedings 15, 2019, 2–10. |
|
164 |
Comparison
of microstructure, dilution and wear behavior of Stellite 21 hardfacing on
H13 steel using cold metal
transfer and plasma
transferred arc welding processes, GP Rajeev, M Kamaraj, SR Bakshi, Surface
and Coatings Technology, 375
(15), 2019, 383–394. |
|
163 |
Effect of correction parameters on deposition characteristics in cold metal
transfer welding, GP Rajeev, M Kamaraj, SR Bakshi, Materials and Manufacturing Processes, 34 (11), 2019, 1205-1216. |
|
162 |
Measurement of local creep
strain in the notch region
using AC Potential Drop Technique, CM Omprakash, A Kumar, M Kamaraj, B Srivathsa, DVV Satyanarayana, Measurement, 145, 2019,
500–502. |
|
161 |
Cold Spray Coating
Diagram: Bonding Properties and Construction Methodology, M Kamaraj, VM Radhakrishnan, Journal
of Thermal Spray
Technology, 28 (4), 2019, 756 – 768. |
|
169 |
N-doped 3D porous carbon-graphene/polyaniline hybrid
and N-doped porous
carbon coated
gC3N4nanosheets
for excellent energy
density asymmetric supercapacitors, Sandhya
Rani Mangisetti, M Kamaraj, S Ramaprabhu, Electrochemica Acta,
305, 2019, 264 – 277. |
|
159 |
Green
Approach for Synthesizing Three Different Carbon Microstructures from a Single
Biowaste Bombaxmalabaricum for Fully Biocompatible Flexible Supercapacitors and Their Performance in Various Electrolytes, Sandhya Rani Mangisetti, M Kamaraj, S Ramaprabhu, ACS Omega,
4 (4), 2019, 6399 – 6410. |
|
158 |
Role
of water in the sol-gel synthesis of yttrium monosilicate,
S Raghunandhan, R
Sureshkumar, M Kamaraj, S Ashtosh, Gandhi,
Ceramic International, 45 (4), 2019, 4487
- 4492. |
|
157 |
Effect of Applied Energy on the Microstructure, Texture, and Mechanical Properties of
Short-Circuit Metal Inert Gas-Welded Modified Cr-Mo Steel Joints, K Madhavan, M Kamaraj, B Arivazhagan, Metallography, Microstructure, and Analysis, 8, 2019, 23 – 31. |
|
156 |
Influence of Two Different
Salt Mixture Combinations of Na2SO4-NaCl-NaVO3 on Hot Corrosion Behavior of Ni-Base Superalloy Nimonic 263 at 800 °C,
Venkateswararao Mannava, A Sambasiva Rao, Neeta Paulose, M Kamaraj, Ravi Sankar
Kottada,
Journal of materials engineering and performance, 28, 2019, 1077 – 1093. |
|
155 |
An investigation of oxidation/hot corrosion-creep interaction at 800
°C in a Ni-base superalloy coated with salt mixture deposits of Na2SO4 – NaCl – NaVO3, Venkateswararao Mannava, A Sambasiva Rao, Neeta Paulose, M Kamaraj, Ravi Sankar
Kottada,
Corrosion science, 147,
2019, 283 – 298. |
|
154 |
Weld
overlay coating of Inconel 617 M on type 316 L stainless steel by
cold metal transfer process, Paulson Varghese, E
Vetrivendan, Manmath Kumar Dash, S Ningshen, M
Kamaraj, U
Kamachi Mudali, Surface
and coating technology, 357, 2019,
1004 – 1013. |
|
153 |
Synergetic Effect
of Cryorolling and
Postroll
Aging on Simultaneous Increase in Wear
Resistance and Mechanical Properties of an Al–Cu Alloy,
Jaseem, RJ Immanuel, F Khan, MD, BN Sahoo,
PN Rao, SK Panigrahi, M Kamaraj, Journal of Tribology, 140,
2018. |
|
152 |
Improved Resistance of Nanoparticle-Laden Polymer Coatings Subjected to Combined Silt and Cavitation, C Syamsundar, Dhiman Chatterjee, M Kamaraj, Materials Performance and Characterization, 7, 2018, 1127-1150. |
|
151 |
Synergistic Role of Electrolyte and Binder for Enhanced Electrochemical Storage for Sodium-Ion Battery, VS
Ajay Piriya, Rashmi Chandrabhan Shende, G Meenakshiseshadhri, Dharavath Ravindar, Sanjay Biswas, Sadhasivam Loganathan, TS
Balasubramanian, K Rambabu, M Kamaraj, and Sundara Ramaprabhu, ACS Omega, 3 (8), 2018,
9945 – 9955. |
|
150 |
Laves phase in alloy
718 fusion zone—microscopic and calorimetric studies, SGK Manikandan, D Sivakumar, KP Rao, M Kamaraj, Materials Characterization, 100, 2015,
192-206. |
|
149 |
Performance
of Partially Exfoliated Nitrogen‐Doped Carbon Nanotubes Wrapped with Hierarchical Porous
Carbon in Electrolytes, Sandhya Rani Mangisetti, Baraneedharan Pari, M Kamaraj , S
Ramaprabhu, ChemSusChem,
11, 2018, 1664 – 1677. |
|
148 |
Hetero-Atom Doped Highly Conductive
Porous Carbon for Exceptional Electrochemical Performance, SR Mangisetti, S Ramaprabhu, M Kamaraj, ECS Meeting Abstracts, 2018 |
|
147 |
Modelling
the mechanical behaviour of heat-treated AISI 52100 bearing steel with retained austenite, AD Anoop, AS Sekhar, M Kamaraj, K
Gopinath, Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design
and Applications, 232, 2018, 44 – 57. |
|
146 |
Laves phase in alloy
718 fusion zone—microscopic and calorimetric studies, SGK Manikandan, D Sivakumar, KP Rao, M Kamaraj, Materials Characterization, 100, 2015, 192-206. |
|
145 |
Hardfacing of AISI H13 tool steel
with Stellite 21 alloy using
cold metal transfer welding process, GP Rajeev, M Kamaraj, SR Bakshi, Surface and Coating Technology, 326, 2017, 63 – 71. |
|
144 |
A pragmatic approach and quantitative assessment of silt erosion characteristics of HVOF and HVAF
processed WC-CoCr coatings and 16Cr5Ni steel for hydro turbine applications, RK Kumar, M Kamaraj, S Seetharamu, S Anand
Kumar, Materials and Design,
132, 2017, 79 – 95. |
|
143 |
Cold Metal Transfer Welding of Dissimilar A6061 Aluminium Alloy-AZ31B Magnesium Alloy: Effect of Heat Input on
Microstructure, Residual Stress and Corrosion
Behavior, S Madhavan, M Kamaraj, L Vijayaraghavan, K Srinivasa Rao, Transactions of the Indian Institute of Metals, 70, 2017, 1047-1054. |
|
142 |
Microstructure and mechanical properties of aluminium/steel
dissimilar weldments: effect of heat input, S Madhavan, M Kamaraj, L Vijayaraghavan, K Srinivasa Rao, Materials Science and Technology, 33, 2017, 200 – 209. |
|
141 |
Experimental investigation of thermal performance of metal foam
wicked flat heat
pipe, D Somasundaram, A Mani, M Kamaraj, Experimental Thermal
and Fluid Science, 82, 2017, 482 – 492. |
|
140 |
A pragmatic approach and quantitative assessment of silt
erosion characteristics of HVOF and HVAF processed WC-CoCr coatings and 16Cr5Ni steel for hydro
turbine applications, RK Kumar, M Kamaraj, S Seetharamu, S Anand
Kumar, Materials and Design, 132,
2017, 79-95. |
|
139 |
Creep Damage Evaluation of DS CM247
Nickel Base Superalloy Using Alternate Current Potential Drop Technique, CM Omprakash, B Srivathsa, M Kamaraj, DVV Satyanarayana, Transactions of the Indian
Institute of Metals
69 (2), 2016,
241-245. |
|
138 |
An
innovative spraying setup to
obtain uniform salt (s) mixture deposition to investigate hot corrosion, V
Mannava, AV Swaminathan, M Kamaraj, RS Kottada, Review
of Scientific Instruments 87 (2), 2016, 025107. |
|
137 |
Hot Corrosion Studies on Ni-base Superalloy at 650° C under Marine-like Environment Conditions using Three
Salt Mixture (Na2SO4+ NaCl+ NaVO3), V Mannava, AS Rao, N Paulose, M Kamaraj, RS Kottada, Corrosion Science, 105, 2016, 109-119. |
|
136 |
Cold metal transfer welding
of aluminium to magnesium: microstructure and mechanical properties, S Madhavan, M Kamaraj, L Vijayaraghavan, Science
and Technology of Welding and Joining, 21, 2016, 310-316. |
|
135 |
Post-impact Fatigue Response of CFRP Laminates under Constant Amplitude
and Programmed FALSTAFF Spectrum Loading, D Sudevan, RV Prakash, M Kamaraj, Procedia Engineering, 101, 2015, 395-403. |
|
134 |
Modelling the mechanical behaviour
of heat-treated AISI 52100 bearing steel with retained austenite, AD
Anoop, AS Sekhar, M Kamaraj, K Gopinath, Proceedings of the Institution of Mechanical Engineers, Part L: Journal
of Materials: Design
and Applications, 232, 2015, 44-57. |
|
133 |
Investigation of Nano-Molybdenum Carbide
Particle Produced by Wire-Explosion Process, Plasma
Science, R Sarathi, RS Reddy, TS Rashmi, AOkamoto, H Suematsu, P Selvam, U Kamachi Mudali and M Kamaraj, IEEE Transactions, 43 (10), 2015,
3470- 3475. |
|
132 |
Heat and Fluid Flow Characteristics of Copper Metal
Foam as Heat
Pipe Wick Material, D Somasundaram, A Mani, M Kamaraj, Applied Mechanics and Materials, 787, 2015,
112-116. |
|
131 |
Microstructure and mechanical properties of cold metal transfer welded aluminium/dual phase steel, S Madhavan, M Kamaraj, L Vijayaraghavan, Science and Technology of Welding and Joining, 21, 2015, 194-200. |
|
130 |
Experimental Characterization of Silt
Erosion of 16Cr–5Ni Steels and Prediction Using Artificial Neural Network, C Syamsundar, D Chatterjee, M Kamaraj, Transactions of the Indian
Institute of Metals,
68 (4), 2015,
587-599. |
|
129 |
Numerical evaluation of subsurface stress field under
elastohydrodynamic line contact for AISI 52100
bearing steel with
retained austenite, AD Anoop, AS Sekhar, M Kamaraj, K Gopinath, Wear,
330, 2015, 636-642. |
|
128 |
Influence of low nickel
(0.09 wt%) content
on microstructure and toughness of P91 steel welds, B Arivazhagan, M Vasudevan, M Kamaraj, Metals
and Materials International, 21 (3), 2015, 538-542. |
|
127 |
Erosion Characteristics of Nanoparticle-Reinforced Polyurethane Coatings on Stainless Steel Substrate, C Syamsundar, D Chatterjee, M Kamaraj, AK Maiti, Journal of Materials
Engineering and Performance, 24 (4), 2015,
1391-1405. |
|
126 |
Laves phase in alloy
718 fusion zone—microscopic and calorimetric studies, SGK Manikandan, D Sivakumar, KP Rao, M Kamaraj, Materials Characterization, 100, 2015,
192-206. |
|
125 |
Numerical evaluation of subsurface stress field under
elastohydrodynamic line contact for AISI 52100
bearing steel with
retained austenite, AS Sekhar, M Kamaraj, K Gopinath, AD Anoop, Wear,
330, 2015, 636-642. |
|
124 |
Experimental
Characterization of Silt Erosion of 16Cr-5Ni Steels and Prediction using Artificial Neural Network, C. Syamsundar, Dhiman
Chatterjee and M. Kamaraj, Trans. of the Indian
Institute of Metals,
68, 2015, 587-599. |
|
123 |
Microstructural characterization of liquid nitrogen cooled Alloy 718
fusion zone, SGK
Manikandan, D Sivakumar, KP Rao, M Kamaraj, Journal of Materials Processing Technology, 214
(12), 2014, 3141-3149. |
|
122 |
The effects of various
reinforcements on dry sliding wear
behaviour of AA6061nanocomposites, D. Jeyasimman, R. Narayanasamy, R. Ponalagusamy, V. Anandakrishnan, M. Kamaraj, Materials & Design, 64, 2014. 783-793. |
|
121 |
Quantitative evaluation of 3D surface roughness parameters during cavitation exposure of 16Cr–5Ni hydro turbine steel, RK Kumar, S Seetharamu, M Kamaraj, Wear, 320,
2014, 16-24. |
|
120 |
Tribological and corrosion properties of Al–12Si produced by selective laser melting, KG Prashanth, B Debalina, Z Wang, PF Gostin, A Gebert,
M Calin, U Kühn, M. Kamaraj, S. Scudino and J. Eckert, Journal
of Materials Research, 29 (17), 2014, 2044-2054. |
|
119 |
Dry sliding wear behaviour of zinc oxide reinforced magnesium matrix nano- composites, B. Selvam, P. Marimuthu, R. Narayanasamy, V. Anandakrishnan, K.S. Tun, M. Gupta, M. Kamaraj,
Materials & Design,
58, 2014, 475-481. |
|
118 |
Al-Si-Mn Alloy coating on aluminum substrate using cold metal
transfer (CMT) welding technique, GP Rajeev, M Kamaraj, SR Bakshi, JOM,
66 (6), 2014,
1061-1067. |
|
117 |
Sliding wear behaviour of alumina coatings prepared from mechanically milled powders, PA Manojkumar, AS Gandhi, M Kamaraj, AK Tyagi, Wear,
313 (1-2), 2014,
11-18. |
|
116 |
Effect of load and composition on friction and dry sliding
wear behavior of tungsten carbide Particle-reinforced iron composites, D
Bhattacharjee, K Muthusamy, S Ramanujam, Tribology Transactions, 57 (2), 2014, 292-299. |
|
115 |
Effect of weld cooling
rate on Laves phase formation in Inconel 718 fusion zone, SGK
Manikandan, D Sivakumar, KP Rao, M Kamaraj, Journal of Materials Processing Technology, 214 (2), 2014,
358-364. |
|
114 |
Microstructural Degradation in Power Plant Steels and Life Assessment of Power Plant Components, K Singh, M Kamaraj, Procedia Engineering, 55, 2013,
394-401. |
|
113 |
Studies towards development of laser peening technology for martensitic stainless steel and titanium alloys for steam
turbine applications, BK Pant, R Sundar, Harish Kumar,
R Kaul, AHV Pavan, K Ranganathan, KS Bindra, SM Oak, LM Kukreja, Raghu V. Prakash, M
Kamaraj, Materials Science and Engineering: A, 587, 2013, 352-358. |
|
112 |
Improvement of Slurry Erosion
Wear Resistance of 16Cr-5Ni Martensite Stainless Steel by LSA and LTH, SS Basha, VM Periasamy, M Kamaraj, SM Shariff, Journal
of materials engineering and performance, 22 (12), 2013,
3689-3698. |
|
111 |
Metal-cored arc welding process
for joining of modified 9Cr-1Mo
(P91) steel, B Arivazhagan, M Kamaraj, Journal
of Manufacturing Processes, 15 (4), 2013,
542- 548. |
|
110 |
Understanding the mechanism of nanoparticle formation in a wire explosion process by adopting the optical emission technique, B Debalina, M Kamaraj, SR Chakravarthi, NJ Vasa, R Sarathi, Plasma
Science and Technology, 15 (6), 2013,
562. |
|
109 |
Repair Process for Turbine Casting, SGK Manikandan, D Sivakumar, KP Rao, M Kamaraj,
Journal of Metallurgical
Engineering, 2 (2), 2013,
61-71. |
|
108 |
Microstructure and dry sliding
wear behaviour of titania and alumina–titania coatings, A Vadiraj, M Kamaraj, VS Sreenivasan, Surface
Engineering, 29 (1), 2013, 11-16. |
|
107 |
Microstructure and wear characteristics of
nickel based hardfacing alloys
deposited by
plasma transferred arc welding, K Gurumoorthy, M Kamaraj, KP Rao, S Venugopal, Materials science
and technology, 22 (8), 2006,
975-980. |
|
106 |
Effect of surface modified layers on fretting fatigue damage of biomedical titanium alloys, A Vadiraj, M Kamaraj, UK Mudali, AK Nath, Materials science and technology, 22 (9), 2006,
1119-1125. |
|
105 |
Wear behaviour of Fe3 Al
intermetallic particle reinforced PM based iron metal matrix composites, K
Venkateswaran, M Kamaraj, KP Rao, Powder metallurgy, 49 (4),
2006, 374-379. |
|
104 |
Fretting wear studies on PVD TiN coated, ion implanted and
thermally oxidised biomedical titanium alloys, A Vadiraj, M Kamaraj, R Gnanamoorthy, Surface engineering 23 (3), 2007, 209-215. |
|
103 |
Microstructure and
high temperature strength of age hardenable AA2219 aluminium alloy modified by Sc, Mg and Zr additions, KS Rao, PN Raju, GM Reddy, M Kamaraj, KP Rao, Materials Science and
Technology, 25 (1),
2009, 92-101. |
|
102 |
Continuous drive friction welding
of Inconel 718 and EN24 dissimilar metal combination, SV Lalam, GM Reddy, T Mohandas, M Kamaraj, BS Murty, Materials Science and Technology, 25 (7), 2009,
851-861. |
|
101 |
Mechanical and wear behaviour of alloyed hypereutectic grey cast iron, A Vadiraj, G Balachandran, M Kamaraj, B Gopalakrishna, DV Rao, Materials Science and Technology, 26 (7), 2010,
842-848. |
|
100 |
Effect of scanning speed, nozzle
stand-off distance and beam scan-off distance on coating properties of laser surface
alloyed 13Cr-4Ni steel, RC Shivamurthy,
M Kamaraj, R Nagarajan, SM Shariff, G Padmanabham, Transactions of the Indian Institute of Metals, 61 , 2008, 183-186. |
|
99 |
Role of nanocrystalline feedstock
in the tribological behaviour of alumina coatings deposited by detonation gun, PA
Manojkumar, AS Gandhi, M Kamaraj, VT Paul, N
Kumar, AK Tyagi,
International Journal of Refractory Metals
and Hard Materials 35, 2012, 108-114. |
|
98 |
A
comparative study on wear behavior of TiN and diamond
coated WC-Co substrates against hypereutectic Al-Si
alloys, M Kamaraj, MSR Rao, M Chandran, SS Bhattacharya, Applied Surface Science, 261, 2012, 520-527. |
|
97 |
Surface nanocrystallization of aluminium alloy by controlled ball
impact technique, NA Prakash, R Gnanamoorthy, M Kamaraj, Surface
and Coatings Technology, 210, 2012, 78-89. |
|
96 |
Generation and characterization of zirconium nitride
nanoparticles by wire explosion process, R Sarathi, SR
Chakravarthy, U KamachiMudali, M Kamaraj, RS Reddy, Ceramics International, 38(7),
2012, 5507–5512. |
|
95 |
Fretting wear behavior of controlled ball
impact treated aluminium alloy
under dry sliding condition, NA Prakash, R Gnanamoorthy, M Kamaraj, Surface and Coatings Technology, 207,
2012, 450-460. |
|
94 |
Synthesis and characterization of
hexagonal nano tungsten carbide powder using multi walled carbon nanotubes, R Sarathi, SR Chakravarthy, B Sankar, M Kamaraj, S Aravinth, International Journal of Refractory Metals and Hard
Materials, 33, 2012, 53-57. |
|
93 |
Fretting wear behavior of fine
grain structured aluminium alloy formed by oil jet peening process under dry sliding
condition, NA Prakash, R Gnanamoorthy,
M Kamaraj, Wear, 294, 2012, 427-437. |
|
92 |
Influence of Load and Sliding Speed
on Friction and Interface Temperature of Hypereutectic Alloyed
Gray Cast Iron, A Vadiraj, M Kamaraj, VS Sreenivasan, Transactions of the Indian Institute of Metals, 65 (3), 2012,
289-296. |
|
91 |
Effect of sliding speed
on wear behaviour of nitrided martensitic stainless steel under boric acid and MoS2 lubrication, A Vadiraj, M Kamaraj, VS Sreenivasan, Surface Engineering 28 (3), 2012,
192-194. |
|
90 |
Sliding wear behaviour of AZ31B magnesium alloy and nano-composite, M Srinivasan, C Loganathan, M Kamaraj, QB Nguyen, M Gupta, R.
Narayanasamy, Transactions of Nonferrous Metals
Society of China,
22 (1), 2012,
60-65. |
|
89 |
Laves phase control in Inconel 718 weldments, SGK Manikandan, D Sivakumar, M Kamaraj, KP Rao, Materials Science Forum, 710, 2012, 614-619. |
|
88 |
Fretting wear behavior of fine grain structured aluminium alloy formed by oil jet peening process under dry sliding condition, M Kamaraj, N Arun Prakash, R Gnanamoorthy, Wear, 294, 2012, 427-437. |
|
87 |
Generation and characterization of zirconium carbide
nanoparticles by wire explosion process, R Sarathi, SR Chakravarthy, M Kamaraj, UK Mudali, RS Reddy, Materials transactions, 53(8),
2012, 1420-1424. |
|
86 |
Generation and characterization of zirconium nitride nanoparticles by wire explosion process, RS Reddy,
M Kamaraj, UK Mudali, SR Chakravarthy, R Sarathi, Ceramics International, 38 (7), 2012, 5507-5512. |
|
85 |
Synthesis and characterization of
hexagonal nano tungsten carbide powder using multi walled carbon nanotubes, S Aravinth, B Sankar, M Kamaraj, SR Chakravarthy, R Sarathi, International Journal of Refractory Metals and Hard Materials, 33, 2012, 53-57. |
|
84 |
A
comparative study on wear behavior
of TiN and diamond coated
WC–Co substrates against hypereutectic Al–Si
alloys, GV Chakravarthy, M Chandran, SS Bhattacharya, MSR Rao, M Kamaraj, Applied Surface Science, 261, 2012, 520-527. |
|
83 |
Sliding wear behaviour of AZ31B magnesium alloy and nano-composite, M Srinivasan, C Loganathan, M Kamaraj, QB Nguye, M Gupta, R Narayanasamy, Transactions of Nonferrous Metals
Society of China,
22(1), 2012, 60-65. |
|
82 |
Influence of aging treatment on microstructure, wear and corrosion behavior of a nickel
base hardfaced coating, D.Kesavan and M Kamaraj, Wear, 272, 2011,
7-17. |
|
81 |
Mechanical and wear behavior of alloyed gray
cast iron in the quenched and tempered and austempered conditions, G Balachandran, AravindVadiraj, M Kamaraj,
Ekusa Kazuya, Materials & Design, 32, 2011,
4042-4049. |
|
80 |
Wear and friction behavior of alloyed gray
cast iron with solid lubricants under boundary lubrication, A Vadiraj, M Kamaraj, VS Sreenivasan
Tribology |
|
79 |
A
Study on Influence of Aging Treatment on Sliding Wear
Resistance of a Nickel Based Hardfacing Alloy, D Kesavan, M Kamaraj, Transactions of the Indian
Institute of Metals, 64 (4-5), 2011, 453-460. |
|
78 |
A Study on Factors Influencing Toughness of
Basic Flux-Cored Weld of Modified 9Cr- 1Mo Steel, B Arivazhagan, M Kamaraj, Journal
of materials engineering and performance, 20 (7),
2011, 1188-1195. |
|
77 |
High Temperature Dry Sliding
Wear Behaviour of Al‐Si/Graphite Composites Processed by Stir Casting, G Rajaraml, S Kumaran, TS Raol, M Kamaraj, TMS 2011 140th
Annual Meeting and Exhibition, Materials Fabrication, 2, 2011, 191. |
|
76 |
Wear and friction behavior of alloyed gray
cast iron with
solid lubricants under boundary lubrication, A Vadiraj, M Kamaraj,
Sreenivasan, Tribology international, 44 (10), 2011, 1168-1173. |
|
75 |
Mechanical and wear behavior of alloyed gray
cast iron in the quenched and tempered and austempered conditions, G Balachandran, A Vadiraj, M Kamaraj, E Kazuya,
Materials & Design, 32 (7), 2011, 4042-4049. |
|
74 |
Dry sliding wear behaviour of oil
jet peened aluminium alloy,
AA6063-T6, AN Prakash,
R Gnanamoorthy, M Kamaraj, Journal of engineering tribology,
224 (11), 2010, 1189-1196. |
|
73 |
Mechanical and wear behavior of quenched and tempered alloyed
hypereutectic gray cast iron, A Vadiraj, G Balachandran, M Kamaraj, E Kazuya, Materials & Design, 32 (4), 2011,
2438-2443. |
|
72 |
Effect of Aging Treatment on Microstructure and Wear Behaviour of a Nickel
Based Hardfaced Coating, D Kesavan, M Kamaraj, Advanced Materials Research 194, 2011,
2284-2289. |
|
71 |
Microstructure and Wear Behavior of Austempered and as-cast
AusferriticGray Cast Irons, A Vadiraj, M Kamaraj, SAE Technical Paper,
2011. |
|
70 |
Studies on high temperature
wear and its mechanism of Al–Si/graphite
composite under dry sliding conditions, G Rajaram, S Kumaran, TS Rao, M Kamaraj, Tribology International, 43 (11), 2010,
2152-2158. |
|
69 |
Creep ductility evaluation of low alloy
steels used for
steam turbine components, K Singh, M Kamaraj, Transactions of the Indian
Institute of Metals,
63 (2-3), 2010, 391-395. |
|
68 |
Fretting fatigue behavior of surface modified biomedical titanium alloys, A Vadiraj, M Kamaraj, Transactions of the Indian
Institute of Metals, 63 (2-3), 2010,
217-223. |
|
67 |
Laser modification of detonation-gun sprayed ferro-boron coatings on AISI 304L
SS, P Shankar, NR Karthikeyan, M Kamaraj, PC Angelo, Transactions of the Indian Institute of Metals 63 (4),
2010, 751-756. |
|
66 |
Microstructural evolution and mechanical properties of oil jet peened aluminium alloy, AA6063-T6, NA Prakash, R Gnanamoorthy, M Kamaraj, Materials & Design, 31 (9),
2010, 4066-4075. |
|
65 |
Structure and property studies
on austempered and
As-cast ausferritic gray cast irons, A Vadiraj, G Balachandran, M Kamaraj, Journal
of materials engineering and performance, 19 (7),
2010, 976-983. |
|
64 |
Mechanical behaviour of an austempered ductile
iron, S Dhanasekaran, A Vadiraj, G Balachandran, M Kamaraj, Transactions of the Indian
Institute of Metals,
63 (5), 2010,
779-785. |
|
63 |
The microstructure and high temperature wear performance of a nickel
base hardfaced coating, D Kesavan, M Kamaraj, Surface
and coatings technology, 204 (24), 2010,
4034-4043. |
|
62 |
A Study on Factors Influencing Toughness of
Basic Flux-Cored Weld of Modified 9Cr- 1Mo Steel, B Arivazhagan, M Kamaraj, Journal
of materials engineering and performance, 20 (7),
2011, 1188-1195. |
|
61 |
Dry sliding wear behaviour of oil jet peened aluminium alloy,
AA6063-T6, Proceedings of the Institution of Mechanical Engineers, R Gnanamoorthy, M Kamaraj, N Arun Prakash, Part J: Journal
of Engineering Tribology, 224 (11), 2010, 1189-1196. |
|
60 |
Formation and stability of equiatomic and non-equiatomic nanocrystalline CuNiCoZnAlTi high-entropy alloys by mechanical alloying, S Varalakshmi, M Kamaraj, BS Murty, Metallurgical and Materials Transactions A, 41 (10),
2010, 2703- 2709. |
|
59 |
Hot consolidation and mechanical properties of nanocrystallin eequiatomic AlFeTiCrZnCu high entropy alloy after
mechanical alloying, S Varalakshmi, GA Rao, M Kamaraj, BS Murty, Journal of materials science, 45 (19), 2010, 5158-5163. |
|
58 |
Generation and characterization of nano-tungsten carbide
particles by wire explosion process, B Debalina, M Kamaraj, BS Murthy, SR Chakravarthi, R Sarathi, Journal
of Alloys and Compounds, 496
(1-2), 2010, 122-128. |
|
57 |
Friction and wear behavior of surface nanocrystallized aluminium alloy under dry sliding condition, NA
Prakash, R Gnanamoorthy, M Kamaraj, Materials
Science and Engineering: B, 168
(1-3), 2010, 176-181. |
|
56 |
Wear behavior of alloyed
hypereutectic gray cast iron, A Vadiraj, G Balachandran, M Kamaraj, B Gopalakrishna, DV Rao, Tribology International, 43 (3),
2010, 647- 653. |
|
55 |
Studies on mechanical and wear properties of alloyed hypereutectic gray cast irons in the as-cast pearlitic and austempered conditions, A Vadiraj, G
Balachandran, M Kamaraj, B Gopalakrishna, KP Rao, Materials & Design, 31 (2), 2010,
951-955. |
|
54 |
Processing and properties of nanocrystalline CuNiCoZnAlTi high entropy alloys
by mechanical alloying, BS Murty, M Kamaraj, S Varalakshmi, Materials Science and Engineering: A, 527(4-5), 2010,
1027–1030. |
|
53 |
Effect of Boron Carbide
Addition on Wear Behaviour of Cobalt Based Hardfacings by
Plasma Transferred Arc Process, DRG Achar, M Kamaraj, G Bavisetty, Materials Science
Forum, 638, 2010,
3745-3750. |
|
52 |
Structure–property correlation in austempered alloyed hypereutectic gray cast irons, A Vadiraj, G Balachandran, M Kamaraj, B Gopalakrishna, KP Rao, Materials Science and
Engineering: A, 527 (3), 2010 782-788. |
|
51 |
Effect of misch metal
inoculation on microstructure, mechanical and wear properties of hypoeutectic gray cast irons, A Vadiraj, G Balachandran, M Kamaraj, Materials & Design, 30 (10),
2009, 4488-4492. |
|
50 |
Slurry erosion characteristics and
erosive wear mechanisms of Co-based and Ni- based coatings formed by laser
surface alloying, SM Shariff, G Padmanabham,
RC Shivamurthy, M Kamaraj, R Nagarajan, Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 41(2), 2010,
470-486. |
|
49 |
Microstructure and mechanical properties of 9Cr-1Mo steel
weld fusion zones
as a function of weld metal
composition, B Arivazhagan, R Prabhu, SK Albert, M Kamaraj, S Sundaresan, Journal
of materials engineering and performance, 18 (8), 2009, 999-1004. |
|
48 |
Structure and property studies on austempered and as-cast ausferriticgray cast irons, G Balachandran, M Kamaraj, A Vadiraj, Journal
of Materials Engineering and Performance, 19(7),
2010, 976-983. |
|
47 |
A study on influence of shielding
gas composition on toughness of flux-cored arc weld of modified 9Cr–1Mo (P91)
steel, B Arivazhagan, S Sundaresan, M Kamaraj, Journal
of Materials Processing Technology, 209 (12-13), 2009, 5245-5253. |
|
46 |
Influence of microstructure on slurry erosive
wear characteristics of laser surface alloyed 13Cr–4Ni steel, RC Shivamurthy, M Kamaraj, R Nagarajan, SM Shariff, G Padmanabham, Wear, 267 (1-4), 2009, 204-212. |
|
45 |
Creep ductility of 1Cr1Mo1/4V low alloy forging and casting steels, K Singh, M Kamaraj, Materials Science
and Engineering: A, 510, 2009,
51-57. |
|
44 |
Comparative wear behavior of MoS2 and WS2 coating on plasma-nitrided SG
iron, A Vadiraj, M Kamaraj, Journal
of materials engineering and performance, 19 (2), 2010,
166-170. |
|
43 |
Synthesis and characterization of nanocrystalline AlFeTiCrZnCu high entropy solid solution by mechanical alloying, S Varalakshmi, M Kamaraj, BS Murty, Journal
of Alloys
and Compounds, 460
(1-2), 2008, 253-257. |
|
42 |
Effect of TIG arc surface melting process on weld
metal toughness of modified 9Cr- 1Mo (P91) steel, B
Arivazhagan, S Sundaresan, M Kamaraj, Materials Letters, 62 (17-18), 2008, 2817-2820. |
|
41 |
Development and use of combined
wear testing equipment for evaluating galling and high stress sliding wear behaviour, K Gurumoorthy, M Kamaraj, KP Rao, S Venugopal, Materials &
design, 28 (3), 2007, 987-992 |
|
40 |
Microstructure and high temperature stability of age hardenable AA2219 aluminium alloy modified by Sc, Mg and Zradditions, PN Raju, KS Rao, GM Reddy, M Kamaraj, KP Rao, Materials Science and Engineering: A, 464 (1-2),
2007, 192-201. |
|
39 |
Slurry erosion studies on surface modified 13Cr-4Ni steels: Effect
of angle of impingement and particle size, T Manisekaran, M Kamaraj, SM Sharrif, SV Joshi, Journal of materials engineering and performance, 16 (5), 2007,
567-572. |
|
38 |
Dry sliding wear of a powder
metallurgy copper-based metal
matrix composite reinforced with iron aluminide intermetallic particles, K Venkateswaran, M Kamaraj, KP Rao, Journal
of composite materials, 41 (14), 2007,
1713-1728. |
|
37 |
Microstructural aspects
of plasma transferred arc surfaced Ni-based hardfacing alloy, K Gurumoorthy, M Kamaraj,
KP Rao, AS Rao, S Venugopal, Materials Science and Engineering: A 456 (1-2), 2007, 11-19. |
|
36 |
Fretting fatigue studies of surface modified biomedical titanium alloys, A Vadiraj, M Kamaraj, Materials science forum, 539, 2007, 681-686. |
|
35 |
Fretting wear studies on uncoated, plasma nitrided and laser nitrided biomedical titanium alloys, A Vadiraj, M Kamaraj, R Gnanamoorthy, Materials Science and Engineering: A, 445, 2007, 446-453. |
|
34 |
Effect of surface treatments on fretting fatigue
damage of biomedical titanium alloys, A Vadiraj, M Kamaraj, Tribology international, 40 (1),
2007, 82-88. |
|
33 |
Effect of plasma nitriding on fretting fatigue damage of surgical grade titanium alloys, A Vadiraj, M Kamaraj, Transactions of the Indian Institute of Metals, 59 (4), 2006,
503-509. |
|
32 |
Fretting fatigue studies of titanium nitride-coated biomedical titanium alloys, A Vadiraj, M Kamaraj, Journal
of materials engineering and performance, 15 (5), 2006, 553-557. |
|
31 |
Characterization of fretting fatigue damage of PVD TiN coated biomedical titanium alloys, A Vadiraj, M Kamaraj, Surface
and Coatings Technology, 200 (14-15), 2006, 4538-4542. |
|
30 |
Damage characterization of unmodified and surface modified medical grade titanium alloys under fretting
fatigue condition, A Vadiraj, M Kamaraj, Materials Science and Engineering: A, 416 (1-2), 2006, 253-260. |
|
29 |
Stress rutpure behavior of transition joints
between modified Kr-Mo steel and 316 L
(N) SS, S Sundaresan, SK Albert, M Sireesha, J Swaminathan, M Kamaraj, Transactions Of The Indian Institute of Metals, 58 (2-3), 2005,
493-499. |
|
28 |
Improving mechanical properties of 2219 aluminium alloy GTA welds by scandium addition, SR Koteswara Rao, G Madhusudhan Reddy,
P Srinivasa Rao,
M Kamaraj, K Prasad Rao, Science and
Technology of Welding
and Joining, 10 (4), 2005,
418-426. |
|
27 |
Fretting fatigue of biomaterials, A Vadiraj, M Kamaraj, UK Mudali, B Raj, Transactions of the
Indian Institute of Metals, 58 (5), 2005,
911-929. |
|
26 |
Dry erosion behaviour of thermal sprayed WC-CO and Cr3C2NiCr coatings, MP Nimbalkar, M Kamaraj, Transactions of the Indian
Institute of Metals, 58 (5), 2005. |
|
25 |
Effect of scandium additions on creep properties of AA 2219 Al-Alloy, P Nagaraju, KP Rao, M Kamaraj, Transactions of the Indian Institute of Metals, 58 (5), 2005. |
|
24 |
Grain refinement through arc
manipulation techniques in Al–Cu alloy GTA welds, SRK Rao, GM Reddy, M Kamaraj, KP Rao, Materials Science and Engineering: A, 404 (1-2), 2005, 227-234. |
|
23 |
Reasons for superior mechanical and corrosion properties of 2219 aluminum alloy electron beam welds, SRK Rao, GM Reddy, KS Rao, M Kamaraj, KP Rao, Materials characterization, 55 (4-5), 2005,
345-354. |
|
22 |
Gas tungsten arc welded
AA 2219 Alloy
using Scandium containing fillers-mechanical and Corrosion behavior, SRK Rao, GM Reddy, KS Rao, PS Rao, M Kamaraj, KP Rao, Transactions of the Indian
Institute of Metals,
57 (5), 2004,
451- 459. |
|
21 |
Optimization of AC-TIG welding parameters and bead geometry in aluminum welds using DOE and ANOVA, SRR Rao, M Ashfaq, M Kamaraj, KP Rao, Transactions of the Indian Institute of Metals, 46, 2003, 241-247. |
|
20 |
Effect of thermo-mechanical treatments on A 2219-T 6 weldments, SRK Rao, MV Lakshmi, PS Rao, M Kamaraj, KP Rao, Transactions of the Indian
Institute of Metals, 202 (1),
2003, 283-289. |
|
19 |
Shear Creep Deformation of the Super
Alloy Single Crystal
CMSX‐4 at High Temperatures and Low Stresses, M Kamaraj, K Serin, M Kolbe, K Neuking, G Eggeler, Materialwissenschaft und Werkstofftechnik,
34 (5), 2003, 469-477. |
|
18 |
Rafting in single crystal nickel-base superalloys—an overview, M Kamaraj, Sadhana, 28 (1-2), 2003, 115-128. |
|
17 |
Influence of stress state
on the kinetics of γ-channel widening during high temperature and low stress
creep of the single crystal
superalloy CMSX-4, M Kamaraj, K Serin, M Kolbe, G Eggeler, Materials Science
and Engineering: A, 319, 2001,
796-799. |
|
16 |
Fine quantitative crytallographische Studiezur Flossbildungund Kanalverbreiterung beim Kriechenein kristalliner Nickel-basis-Super legierungen, K Serin, RD Neuser, G Eggeler, M Kamaraj, M Kolbe, M Heitkemper, Praktische Metallographie, 38
(12), 2001, 680-698. |
|
15 |
A quantitative metallographic study of rafting and
gamma-channel widening during creep in single crystal nickel base
super alloys, K Serin, RD Neuser, G Eggeler, M Kamaraj, M Kolbe, M Heitkemper, Praktische Metallographie(Germany), 38 (12), 2001, 680-698. |
|
14 |
Influence of stress state
on the kinetics of -channel widening during high temperature and low stress creep of
single crystal superalloy CMSX-4, M Kamaraj,
K Serin, M Kolbe, G Eggeler, Materials Science
and Engineering A, 319, 2001, 796- 799. |
|
13 |
High Temperature Fretting Fatigue Behavior in an XD™ γ-base TiAl, Fretting Fatigue: T Hansson,
M Kamaraj, Y Mutoh, B Pettersson, Current
Technology and Practices, 2000. |
|
12 |
Mechanical
and microstructural investigations of processes governing annealing and shear creep
anisotropy of the single crystal superalloy CMSX-4 at temperatures above 1000°C, Berichtsband
der DFG zum Schwerpunkt programm, M Kolbe, M Kamaraj, M Heitkemper, M Probst-Hein, K Neuking, G Eggeler, Wiley-VCH, Germany, 1998,
384-396. |
|
11 |
On
the influence of stress state on rafting in the single crystal superalloy
CMSX-6 under conditions of high
temperature and low stress creep, M Kamaraj, C Mayr, M Kolbe, G Eggeler, Scripta Materialia, 38 (4),
1998, 589-594. |
|
10 |
The Effect of Tungsten on Creep, B
Arivazhagan, R Prabhu, SK Albert, M Kamaraj, S Sundaresan, Journal of Materials Engineering and Performance, 23 (11), 2009,
7. |
|
9 |
AN analysis of high-temperature crack
growth in Type 308Cb stainless steels and its
weldment, VM Radhakrishnan, M Kamaraj, Journal of pressure vessel
Technology- Trans of the ASME,
113 (4), 1991, 538-541. |
|
8 |
Life
estimation of cracked stainless steel components under creep conditions, VM Radhakrishnan, M Kamaraj, VV
Balasubramaniam, Trans ASME J of Engg. Mat & Tech,
113 (3), 1991,
303–306. |
|
7 |
Relation between rupture time
and steady state
integral, VM Radhakrishnan, M Kamaraj, Materials Science and Engg A, 127 (2), 1990, L15-L18. |
|
6 |
Influence
of microstructure on hot tensile properties of some Nimonic alloys, C.
Ramanatha, M Kamaraj,
K Prasad Rao, Practical Metallography, 27 (3), 1990,
124- 131. |
|
5 |
A model for creep rupture life under hot corrosion, V Surianarayana, M Kamaraj, KJL Iyer, VM Radhakrishnan, High
temperature Technology, 7(2), 1989,
91-96. |
|
4 |
High
temperature crack growth
in Austenitic weld
metal, M Kamaraj, VM Radhakrishnan, Engineering Fracture Mechanics, 33(5),
1989, 801- 811. |
|
3 |
Creep
Crack growth in
Type
316
stainless steel
and
its
weldment, VM Radhakrishnan, M Kamaraj, High Temperature technology, 8 (3),
1990, 219-226. |
|
2 |
|