Sujit Mulay, Vinit Paliwal and N. Ramesh Babu (2020): Analytical approach to predict the angle formed by multiple laser scan, ICME 14, UNFII Gulf of Naples, Italy, 2020.
Vineet Paliwal and N. Ramesh Babu (2019): Influence of Spindle Speed Variation on the Chatter Stability Limits in High-Speed Milling, Poster Paper presented at 40th MATADOR Conference, July 8-10, Hangzhou, China.
Sujit Mulay, Vineet Paliwal, N. Ramesh Babu (2019): An Analytical Model for Prediction of Bend Angle in Laser Forming based on Strain Energy Principle, Proc. 40th MATADOR Conference, July 8-10, Hangzhou, China.
Vineet Paliwal and N. Ramesh Babu “Prediction of Stability Lobe Diagrams with the Application of Laser Vibrometer” in Indo-Japan Bilateral Symposium on Futuristic Materials and Manufacturing (IJBSFMM) 2018 at IIT Madras, Chennai, India.
Vineet Paliwal and N. Ramesh Babu “Prediction of Chatter Stability in High-Speed Milling with the Application of Operational Modal Analysis”, 13th Asia-pacific Conference on Manufacturing Processes 2018, August, 23-27, 2018 at UNSW Sydney, Australia.
Akshit Choudhary and N. Ramesh Babu (2018): Impact of 3D topography on tribological variations and grinding forces, APCMP 13, UNSW Sydney August 2018, Proceedings of the 13th Asia Pacific Conference on Materials Processing,
Sujit Mulay and N. Ramesh Babu “Finite Element Analysis of Laser Forming Process” IJBSFMM, IITM Chennai, December 2018.
Sujit Mulay and N. Ramesh Babu “Effect of water cooling in multi-pass laser bending process” APCMP 13, UNSW Sydney August 2018, Proceedings of the 13th Asia Pacific Conference on Materials Processing, Vol.I, 353-363.
Umamaheswari M., Vijayaraghavan L., and Ramesh Babu N (2017): Experimental investigation of White layer formation in AISI D2 steels while grinding with Alumina abrasive grains processed in two different manufacturing routes, International Conference on Manufacturing Technology and Simulation, 2017, IIT Madras, India.
Ngangkham Peter Singh, D.S. Srinivasu and N. Ramesh babu (2017): Thermal Analysis of Abrasive Waterjet Machining Process, Proc. of 10th Intl. Conference on Precision, Meso, Micro and Nano Engineering (COPEN 10), Chennai, pp.31-34.
S.M. Mulay and N. Ramesh Babu (2017): Numerical modelling of laser forming of curved surfaces, Proc. of 10th Intl. Conference on Precision, Meso, Micro and Nano Engineering (COPEN 10), Chennai, pp. 43-46, ISBN: 978-93-80689-28-9.
Akshit Choudhary and N. Ramesh Babu (2017): Role of 3D topography of grinding wheel on its performance, Proc. of 10th Intl. Conference on Precision, Meso, Micro and Nano Engineering (COPEN 10), Chennai, pp. 863-866.
Vineet Paliwal and N. Ramesh Babu (2017): Influence of Milling Cutter Dynamics in Stability Lobe Diagrams, Proc. of 10th Intl. Conference on Precision, Meso, Micro and Nano Engineering (COPEN 10), Chennai, pp.859-862.
Bedamati Nayak and N.Ramesh Babu (2017): Effect of Contact Pressure Distribution on Surface Quality in Ice Bonded Abrasive Polishing, Proc. of 10th Intl. Conference on Precision, Meso, Micro and Nano Engineering (COPEN 10), Chennai, pp.329-332.
Uma Shankar and N.Ramesh Babu (2017): Digital Modelling of Grinding Wheel Structure, Proc. of 10th Intl. Conference on Precision, Meso, Micro and Nano Engineering (COPEN 10), Chennai, pp.442-445.
Vineet Paliwal and N. Ramesh Babu Prediction of stability boundaries in milling by considering the variation of dynamic parameters and specific cutting force coefficients, 14th CIRP Conference on Intelligent Computation in Manufacturing Engineering, Gulf of Naples, Italy.
Vineet Paliwal and N. Ramesh Babu, “Improving Dynamic Stability of Machine Tool Structure with Operational Modal Analysis, ,Proc. 27th All India Manufacturing Technology, Design and Research Conference (AIMTDR-2016), ISBN: 978-93-86256-27-0.
Sujit Mulay and N. Ramesh Babu “Numerical modelling of laser forming process for closed cell metal foam SS316 steel” AIMTDR-2016, Pune, Dec. 2016, 1911-1915, ISBN: 978-93-86256-27-0.
Uma Shankar and N. Ramesh Babu (2016): A Model for Predicting the Geometry of Groove Scribed on Laser Dressed Grinding Wheels." Proceedings of 6th International & 27th All India Manufacturing Technology, Design and Research Conference, Pune, India, 1856.
P.Radhakrishnan, L.Vijayaraghavan, N. Ramesh Babu (2016): Influence of low-frequency vibration on workpiece quality in WEDM process, Proc. 6th International and 27th All India Manufacturing Technology, Design and Research Conference (AIMTDR-2016), Pune, India, pp. 267-2
P.Radhakrishnan, L.Vijayaraghavan, N. Ramesh Babu (2015): Experimental study on material removal capability with Vibration-assisted WEDM, Proceedings of International Conference on Mechanical and Aerospace Engineering (ICMAE-2015), Italy, July 2015, vol.2B.1, pp. 27-28.
Rambabu, S. and Ramesh Babu, N. (2015): Development of functionally graded ice bonded abrasive polishing tool for ultrafine finishing of metallic materials, Proc. Asia-Pacific Conference on Engineering and Applied Science, Aug. 25-27, 2015, Osaka, Japan, pp.65-75.
Madopothula, U., Lakshmanan, V., and Nimmagadda, N. R. B (2014): Prediction of White Layer Formation of AISI 52100 Steel in Grinding by Power Measurement, International conference on Advances in Design and Manufacturing, 2014, NIT Tiruchirappalli, India.
Rambabu, S. and Ramesh Babu, N. (2014): Improved cooling unit with automatic temperature controller for enhancing the life of ice bonded abrasive polishing tool, Proc. 5th International & 26th All India Manufacturing Technology, Design and Research Conference, IIT Guwahati, India, Dec. 12-14, 2014, pp.704 – 1-15.
Vairamuthu, R, Brij Bhushan, M, Srikanth, R, and Ramesh Babu, N. (2014) – Performance analysis of cylindrical grinding process with a portable diagnostic tool, Proc. 5th International & 26th All India Manufacturing Technology, Design and Research Conference, IIT Guwahati, India, Dec. 12-14, 2014, pp.582 – 1-5.
Rambabu S and Ramesh Babu, N. (2014): Effect of temperature on the properties of ice bonded abrasive polishing tool, Proc. of 9th International Workshop on Micro Factories, Oct. 5-8,2014, Honolulu, USA, pp.1-7.
Tushar, G.T., Srikanth, R. and Ramesh Babu, N. (2013): A novel abrasive slurry preparation unit for micro abrasive waterjet machining of materials, Proceedings of the International conference COPEN-8, NIT Calicut, Kerala, India, December 2013.
Srikanth, R. and Ramesh Babu, N. (2012): A strategy for generating contoured surface with abrasive waterjet milling on ductile materials, ASME – IMECE 2012, Houston, Texas, November 9-15, 2012, IMECE2012-87807.
Boopalan M, Venkatarathnam, G and Ramesh Babu, N. (2012): An improved setup for precision polishing of metallic materials using ice bonded abrasive tool, Proc. of 37th International MATADOR Conference, University of Manchester, Manchester, UK, pp.201-204.
Ramesh Babu A and Ramesh Babu, N. (2012): Generation of optimal clusters for effective nesting of 2D shaped parts in 2D sheet using genetic and heuristic approaches, Proc. of the 3rd International and 24th All India Manufacturing Technology Design and Research Conference, Andhra University, Visakhapatnam, Dec13-15, pp.505-510.
Vimal Nandhan R K and Ramesh Babu, N. (2011): Reverse engineering of control programs into recurrent neural networks for reconfigurable manufacturing systems, Proc. of 26th International Conference on CAD/CAM, Robotics and Factories of Future, Kuala Lumpur, Malaysia, July 26-28, pp.729-738.
Siva Saravanan K, Rajasekhar A and Ramesh Babu, N. (2010): An efficient collision avoidance and neighborhood search algorithms for nesting of 2D parts in 2D sheets, Proc. of the 3rd International and 24th All India Manufacturing Technology Design and Research Conference, Andhra University, Visakhapatnam, Dec13-15, pp.621-627.
Vimal Nandhan R K and Ramesh Babu, N. (2010): Effective reconfiguration of control logic in manufacturing systems with recurrent neural network, Proc. of 3rd International and 24th All India Manufacturing Technology Design and Research Conference, Visakhapatnam, Dec. 13-15, 2010.
Mohan, R and Ramesh Babu, N. (2010): Ultra-fine finishing of metallic surfaces with Ice bonded abrasive polishing process, Proc. of 36th International MATADOR Conference, University of Manchester, Manchester, UK, July 14-16, 2010, Paper No. 3-4, pp.105-108.
Mohan, R. and Ramesh Babu, N. (2009), A feasibility study on ice bonded abrasive polishing of metallic materials, Copen 6 – Sixth International Conference on Precision, Meso, Micro and Nano Engineering, PSG Tech and Amirtha University, Coimbatore, December 11-12, 2009, B18-B23.
Srikanth, R. and Ramesh Babu, N. (2009), A precision kerfing approach for milling of precise cavities with abrasive waterjets, Copen 6 – Sixth International Conference on Precision, Meso, Micro and Nano Engineering, PSG Tech and Amirtha University, Coimbatore, December 11-12, 2009, A13-A17.
Chiddarwar, S. S. and Ramesh Babu, N. (2009), Agent based framework for coordinated motion planning of multiple robots, 7th Global Conference on Sustainable Manufacturing, IIT Madras, Chennai, December 2-4, 2009, 373-378.
Vimal Nandhan, R. K. and Ramesh Babu, N. (2009), Reverse engineering of PLC control programs for their re-use in manufacturing systems, 7th Global Conference on Sustainable Manufacturing, IIT Madras, Chennai, December 2-4, 2009, 361-366.
Chiddarwar, S. S. and Ramesh Babu, N. (2009), Dynamic priority allocation for conflict free coordinated manipulation of multiple agents, Proceedings of IEEE Conference on Automation Science and Engineering, Bengaluru, August 22-24, 2009, 549-554.
Prasan Kumar, N., Srikanth, R. and Ramesh Babu, N. (2009), Modeling and analysis of kerf geometry in pocket milling with abrasive waterjets, 12th CIRP Conference on Modeling of Machining Operations, Donostia-San Sebastián, Spain, May 7-8, 2009, 613-620.
Vimal Nandhan R. K. and Ramesh Babu, N. (2008), A modified state space based heuristic approach for design intent recovery of ladder logic diagrams, Proc. Of 2nd International and 23rd All India Manufacturing Technology, Design and Research conference, December 15-17, 2008, 1061-1066.
Shital S Chiddarwar and Ramesh Babu, N. (2008), Inverse kinematics of 6R robot using radial basis function based approach, Proc. Of 2nd International and 23rd All India Manufacturing Technology, Design and Research conference, December 15-17, 2008, 895-900.
Madhu Mohan Reddy B.V., Ramesh Babu, N. and Yadav D.R. (2008), Influence of orifice and focusing nozzle diameters on abrasive waterjet machining of Inconel 690, Proc. Of 2nd International and 23rd All India Manufacturing Technology, Design and Research conference, December 15-17, 2008, 437-442.
John Rozario Jegaraj, J., and Ramesh Babu, N. (2008), Monitoring of the cutting force exerted by jet with variation in orifice and focusing nozzle size in Water Jet Cutting, Proc. Of 2nd International and 23rd All India Manufacturing Technology, Design and Research conference, December 15-17, 2008, 429-436.
Shital S. Chiddarwar and Ramesh Babu, N. (2007): Coordination strategy for path planning of multiple manipulators in work cell environment, Proc. of 24th Intl. Symposium on Automation and Robotics (ISA RC2007), Sept. 19-21, 2007, Kochi, India, pp.185-192.
Manu, R. and Ramesh Babu, N. (2007): Experimental studies on efficient turning of quality parts with abrasive water jets, Proc. of 1st Intl. and Conference on Precision Engineering (COPEN2007), Dec. 2007.
Prasan Kumar, N and Ramesh Babu, N. (2006): An approach for prediction of kerf geometry at cross over region in abrasive water jet milling, Proc. of CARs & FOF, Vellore Institute of Technology, 2006, pp.281-288.
Tiwari Awanish, Manu, R. and Ramesh Babu, N. (2006): Control of traverse rate for efficient turning of parts with abrasive water jets, Proc. of 1st Intl. and 22nd All India Manufacturing Technology Design & Research Conference, Dec. 21-23, 2006, IIT Roorkee, pp.899-904.
Srinivas, D.S, and Ramesh Babu, N. (2006): A neuro-genetic strategy for control of abrasive water jet cutting process with focusing nozzle monitored by machine vision approach, Proc. of 1st Intl. and 22nd All India Manufacturing Technology Design & Research Conference, Dec. 21-23, 2006, IIT Roorkee, pp.851-856.
Srinivas, S. and Ramesh Babu, N. (2006): An analytical model for predicting depth of cut in abrasive water jet cutting of ductile materials, Proc. of 1st Intl. and 22nd All India Manufacturing Technology Design & Research Conference, Dec. 21-23, 2006, IIT Roorkee, pp.863-868.
Vijaya Bhaskar, S., Ramesh Babu, N. and Koshy Varghese (2006), Spline based trajectory planning for cooperative crane lifts, Prof. of 23rd International Symposium on Automation and Robotics (ISARC2006), Oct. 3-5, 2006, Tokyo, Japan, pp.418-423.
R. Manu, Ramesh Babu, N. (2005): Estimation of Process Parameters in Abrasive Water Jet Turning of Parts, Tehran International Congress on Manufacturing Engineering, TICME 2005, 12 -15 December, 2005, Tehran, Iran, pp.1-8.
Srinivas, D.S, Srinivasa, Y.G., Peter, Dirk, Louis, H., and Ramesh Babu, N. (2005): Genetically evolved Artificial Neural Networks built with sparse data for predicting depth of cut in abrasive water jet cutting, 20th American Water Jet conference, Houston, Texas, August 21-23, Paper 5A-4, pp.1-16.
Prakash Krishnaswami, Varadarajan, and Ramesh Babu, N. (2005): Minimum sensitivity positioning and path planning of robot manipulators, SME Assembly Automation Summit, April 19-20, 2005, USA.
Srinivasu, D.S., Ramesh Babu, N. and Srinivasa, Y.G. (2005): Artificial Neural Networks for prediction of seperation depth of cut in abrasive water jet cutting with varying size of focusing nozzle, Emerging Technologies in Intelligent System and Control (EISCO-2005), Jan. 5-7, Coimbatore, India.
Ramesh Babu, N. (2004): Studies on Adaptive Control of Abrasive Water Jet Cutting, Proceedings of the 7th Japan – India Joint Seminar on Advanced Manufacturing Systems, Machida, Japan, pp. 65-75.
Ajmal Deen Ali, M.S., Vijaya Bhaskar, S., Ramesh Babu, N., and Koshy Varghese (2004): Development of a Construction Work Cell for Cooperative Lift Planning Proceedings of 20th ISARC, Jeju, Korea, pp. 297-303.
John Rozario Jegaraj, J., and Ramesh Babu, N. (2003): Fuzzy based control strategy for condition monitoring of abrasive waterjet using vacuum sensor, Proceedings of International Conference on Leading Edge Manufacturing in 21st Century, Niigata, Japan, November 3-6, 2003, pp 1039 – 1046.
Vikram, G. and Ramesh Babu, N. (2003): An analytical model for prediction of residual stresses in Water Jet Peening, Proceedings of the 2003 WJTA American Water Jet Conference, August 17-19, Houston, Texas, paper 5-A, pp.1-16.
Ramesh Babu, N. (2002): Modelling and Analysis of Abrasive Water Jet Cutting Process, Proceedings of 6th India – Japan Joint Seminar on Advanced Manufacturing Systems, Mussorie, India, pp. 23-34.
Ajmal Deen Ali, M.S., Ramesh Babu, N., and Koshy Varghese, (2002): Offline Path Planning of Cooperative Manipulators using Co-evolutionary Genetic Algorithm, Proceedings of 19th ISARC, Washington DC, USA, pp 409- 414.
Vikram, G., Pavithra Harsha and Ramesh Babu, N. (2002): Analytical approach for selection of optimal feedrate in efficient machining of complex surfaces, Proceedings of the International Conference on Manufacturing Automation, ICMA 2002, Hong Kong, pp.227-236.
Rajesh, N. and Ramesh Babu, N. (2002): Surface Characteristics of water jet peened 6063-T6 aluminium alloy, Proceedings of the Eighth International Conference on Shot Peening (ICSP8), Garmisch - Partenkirchen, Germany, September 16-20.
Radhakrishnan, V., Hari, R.S., Ravishankar, M. and Ramesh Babu, N. (2001): A study on centreless grinding with variable stiffness regulating wheel, SME Technical Paper, Proceedings of NAMRC XXIX, May 22-25, Florida, USA, pp.1-8.
Vikram, G. and Ramesh Babu, N. (2001): Modelling and Simulation of abrasive water jet cut surface topography, Proceedings of the 2001 WJTA American Water Jet Conference, pp. 13-27.
Rajesh, N. and Ramesh Babu, N. (2001) “Water Jet Peening – A New Surface Treatment Process”, Proceedings of International Conference on Shot Peening & Blast Cleaning (ICSP & BC), MACT, Bhopal, India, September 17-19,pp. 239-249.
Sivakumar PL., Varghese, K. and Ramesh Babu, N. (2000): Path planning of Cooperative Construction Manipulators using Genetic Algorithms, Proceeding of the 17th International Symposium on Automation and Robotics in Construction (ISARC), Taipei, Taiwan, pp.439-444.
Sivakumar PL., Varghese, K. and Ramesh Babu, N. (1999): Path planning of Construction Manipulators using Genetic Algorithms, Proceeding of the 16th International Symposium on Automation and Robotics in Construction (ISARC), Madrid, Spain, pp.555-560.
Govinda Rao, K., Koshy Varghese, Ramesh Babu, N. and Satya Narayana, K.N. (1999): Design of an Object Oriented Environment for planning Mobile Crane Lifts, Proceedings of the 16th IAARC/IFAC/IEEE International Symposium on Automation and Robotics in Construction (ISARC), Madrid, Spain, September 22-24.
Jayakumar, P, Radhakrishnan, V and Ramesh Babu, N. (1999): Application of Semi-magnetic abrasives for polishing, Proc. of Nagano magel ’99, the second Magneto-eletronics International Symposium, Oct. 20-22, Nagano, Japan, pp.17-20.
Jayakumar, P, Radhakrishnan, V and Ramesh Babu, N. (1999): Experimental studies on the improvement of work surface finish by magnetic abrasive machining, Proc. of ISPE, 3903, pp.9-19.
Krishnaiah Chetty, O.V. and Ramesh Babu, N. (1999): Some investigations on abrasives in Abraive Water Jet Machining, Proceedings of the 10th American Water Jet Conference, Houston, USA, August 14-17, pp. 419-429.
Ramesh Babu, A. and Ramesh Babu, N. (1998): A Genetic approach for Nesting of Two- Dimensional complex parts’ Proceeding of the 14th International Conference on CAD/CAM, Robotics and Factories of the Future, December 1-3, PSG College of Technology, Coimbatore, India, pp.387-394.
Chakravarthy, P.S., Ramesh Babu, N., Ramakumar, M.S., Robert, H. and Chetty, O.V.K. (1998): Investigations on Abrasive Water Jet Cutting of Granites, Proceedings of the 5th Pacific Rim International Conference on Water Jet Technology,New Delhi, pp. 433-440.
Sitarama Chakravarthy, P., Ramesh Babu, A and Ramesh Babu, N. (1998): A Fuzzy based approach for selection of process parameters in Abrasive Water Jet cutting of Balck Granite, Proceedings of the 5th Pacific Rim International Conference on Water Jet Technology, New Delhi, pp.108-120.
Ramesh Babu, N. (1997): Research on Advanced methods of processing materials, Proceedings of the second India- Japan workshop on Advanced Manufacturing Systems, IIT Bombay, November 24-25, pp. 179-190.
Krishna Kishore, A. and Ramesh Babu, N. (1997): Dynamic Mixed Dispatching of FMS. Proceedings of the International Conference on Manufacturing Automation (ICMA’97), Honkong, April 1997, 554 - 559.
Subrahmanyam, V.H.R. and Ramesh Babu, N. (1997): A Simulation based Oscillatory Sequencing Algorithm for Layout Planning of FMS. Proceedings of the International Conference on Manufacturing Automation (ICMA’97), Honkong, April 1997, 845 - 850.
Krishna Kishore, A. and Ramesh Babu, N. (1997): FMS Scheduling With an Application of Mixed Dispatching Rule Approach at Loading and Unloading Stations. Proceedings of International Conference on Advances in Mechanical and Industrial Engineering, Roorkee, India, February 1997, 793 - 799.
Subrahmanyam, V.H.R and Ramesh Babu, N. (1997): Addressing FMS Configuration and Layout Planning Problems with Object Oriented Simulation Approach. Proceedings of International Conference on Advances in Mechanical and Industrial Engineering, Roorkee, India, February 1997, 831 - 838.
Jayakumar, P., Ramesh Babu, N. and Radhakrishnan, V. (1996): Experimental Studies on the Improvement of Work Surface Finish by Magnetic Abrasive Machining. Proceedings of SPIE 1996 Symposium on Smart Materials, Structures and MEMS, Bangalore, India, December 1996.
Stalin Reddy, V. and Ramesh Babu, N. (1996): A Tool Path Planning Procedure for Rough Machining of Free Form Cavities. Proceedings of the 1996 Japan - USA Symposium on Flexible Automation, Boston, USA, July 1996, 715 - 722.
Phanindranath, V. and Ramesh Babu, N. (1995): A Model for Prediction of Ground Surface generated with Laser Dressed Grinding Wheels. Proceedings of 3rd International Conference on Computer Integrated Manufacturing (ICCIM ‘95), Singapore, July 1995.
Phanindranath, V. and Ramesh Babu, N. (1994): A numerical approach for estimating the parameters in dressing grinding wheels with a pulsed laser. Proceedings of the International Conference on Advanced Manufacturing Technology (ICAMT’94) at Johor, Malaysia, August 1994, 191-202.
Ramesh Babu, N. and Radhakrishnan, V. (1993): LASER - A Versatile Dressing Tool for Grinding Wheels, Proceedings of ASME Winter Annual Meeting on Manufacturing Science and Engineering at New Orleans, USA, PED Vol. 64, November 28-December 3 1993, 809-821.
George, K.K. and Ramesh Babu, N. (1991): CNC code generation for Pockets bounded by Free Form Surfaces. Proceedings of International AMSE Conference on Signals, Data & Systems at New Delhi, India, December 1991, 207-218.
Ramesh Babu, N. and Radhakrishnan, V. (1989): A Preliminary Study on Laser Declogging of Loaded Grinding Wheels. Accepted for presentation at International Conference on Electrochemical Machining (ISEM-9) at Nagoya, Japan, 1989.
Ramesh Babu, N. and Radhakrishnan, V. (1988): Surface Topography of a Laser Dressed Grinding Wheel. Proceedings of ASME Winter Annual Meeting on Research and Technological Developments in Nontraditional Machining at Chicago, USA, PED Vol. 34, 1988, 199-212.
Ramesh Babu, N., Radhakrishnan, V. and Murti, Y.V.G.S. (1987): Performance Study of Laser Dressed Grinding Wheels. Proceedings of 6th International Conference on Production Engineering at Osaka,Japan, 1987, 371-376.