Home

Journal/Conference Proceedings/Book Chapters

Highly cited

S. No	Details	Citations (July 2023)	Year of publishing
1	JS Valluri, K Balasubramaniam, RV Prakash Creep damage characterization using non-linear ultrasonic techniques Acta Materialia 58 (6), 2079-2090	112	2010
2	K Balasubramaniam, JS Valluri, RV Prakash Creep damage characterization using a low amplitude nonlinear ultrasonic technique Materials Characterization 62 (3), 275-286	96	2011
3	K Anandavel, RV Prakash Effect of three-dimensional loading on macroscopic fretting aspects of an aero-engine blade–disc dovetail interface Tribology International 44 (11), 1544-1555	72	2011
4	BK Pant, AHV Pavan, RV Prakash, M Kamaraj Effect of laser peening and shot peening on fatigue striations during FCGR study of Ti6Al4V International Journal of Fatigue 93, 38-50	70	2016
5	VVSJ Rao, E Kannan, RV Prakash, K Balasubramaniam Observation of two stage dislocation dynamics from nonlinear ultrasonic response during the plastic deformation of AA7175-T7351 aluminum alloy Materials Science and Engineering: A 512 (1-2), 92-99	66	2009
6	VVS Jaya Rao, E Kannan, RV Prakash, K Balasubramaniam Fatigue damage characterization using surface acoustic wave nonlinearity in aluminum alloy AA7175-T7351 Journal of Applied Physics 104 (12), 123508	63	2008
7	BK Pant, R Sundar, H Kumar, R Kaul, AHV Pavan, K Ranganathan, KS Bindra, SM Oak, LM Kukreja, Raghu V Prakash, M Kamaraj Studies towards development of laser peening technology for martensitic stainless steel and titanium alloys for steam turbine applications Materials Science and Engineering: A 587, 352-358	60	2013

 

Publications (Selective - not exhaustive) 

1.      K Panbarasu, VR Ranganath, RV Prakash (2023), A Study on Flexure Behavior of AS4/914 Grade Carbon Fiber Reinforced Plastic Laminates under Static and Fatigue Loads, Journal of Materials Engineering and Performance 32 (7), 3284-3297

2.      RV Prakash (2023), Multi-sensor techniques to study fatigue damage progression in structural materials, Procedia Structural Integrity 43, 190-196

3.      P Arathanaikotti, RV Prakash (2022), Numerical Simulation and Occupant Injury Prediction Under Side Impact Loading Using Human Surrogate Model, Proceedings of the ASME 2022 International Mechanical Engineering Congress and Exposition. Volume 9: Mechanics of Solids, Structures, and Fluids; Micro- and Nano-Systems Engineering and Packaging; Safety Engineering, Risk, and Reliability Analysis; Research Posters. Columbus, Ohio, USA. October 30–November 3, 2022. V009T14A003. ASME. https://doi.org/10.1115/IMECE2022-95063.

4.      RV Prakash (2022), Studies on Fatigue Damage Progression in Post-Impacted CFRP Composite Through Passive Thermography and Stiffness Measurement, Proceedings of the ASME 2022 International Mechanical Engineering Congress and Exposition. Volume 3: Advanced Materials: Design, Processing, Characterization and Applications; Advances in Aerospace Technology. Columbus, Ohio, USA. October 30–November 3, 2022. V003T03A018. ASME. https://doi.org/10.1115/IMECE2022-95102.

5.      R Prakash, M Thomas, P Pokharkar, C Mukhopadhyay, A Prakash (2022), Fatigue Studies on Small Disk Specimens through Cyclic Small Punch Testing and Acoustic Emission Monitoring, in Evaluation of Existing and New Sensor Technologies for Fatigue, Fracture, and Mechanical Testing, ed. J. Kang, P. McKeighan, G. Dahlberg, R. Kemmerer (West Conshohocken, PA: ASTM International, 2022), 186–211, https://doi.org/10.1520/STP163820210050.

6.      RV Prakash, C Anish, D Sampath (2022), Modeling Electric-Potential for a Crack Subjected to Corrosion Under Static and Cyclic Loading, Pressure Vessels and Piping Conference 86182, V04BT06A037.

7.      RV Prakash, AJ Patil (2022), Fatigue Damage Estimation From Pseudo-Random Load Sequence Generated for Metals and Fiber Reinforced Composites, Pressure Vessels and Piping Conference 86144, V001T01A018

8.      RV Prakash, P Pokharkar, CK Mukhopadhyay, Fatigue Crack Growth Study in Miniature Single Edge Notch Tension Specimen Using Acoustic Emission Technique, Recent Advances in Applied Mechanics, 451-464 (2022)

9.      PSR Narayana, RV Prakash, S Gunti, K Raghu, Maximizing the Energy Absorption Capacity of Thin Walled Box Structures Using Ultra High Strength Steels (UHSS) at Sensitive Zones, Recent Advances in Applied Mechanics, 223-234 (2022)

10.  H Karakampalle, RV Prakash, Effect of interference and location of the crack on the Stress Intensity Factor for the 3-2-1 Lozenge pattern riveted joint, Procedia Structural Integrity 39, 711-721 (2022)

11.  RV Prakash, V Viswanath, Effect of Moisture Absorption on the Tensile and Flexural Properties of Glass Fiber Reinforced Composite Materials, ASME International Mechanical Engineering Congress and Exposition 85574 (2021)

12.  PSR Narayana, RV Prakash, S Gunti, K Raghu, Equivalent Energy Absorption (EEA)-A Methodology for Improved Automotive Crash & Safety Design, ASME International Mechanical Engineering Congress and Exposition 85697 (2021)

13.  K Hithendra, RV Prakash, A Study of Stress Intensity Factors in Lozenge Pattern of Joints, ASME International Mechanical Engineering Congress and Exposition 85574 (2021)

14.  AM Sreenath, RV Prakash, Numerical Simulation of the Effect of Bonded Patch Repair on the Internal Stress Distribution, ASME International Mechanical Engineering Congress and Exposition 85581, (2021)

15.  RV Prakash, M Maharana, Design and Development of Fiber-Reinforced Polymer Seat Base for Two-Wheelers, Design for Tomorrow—Volume 3, 693-704, (2021)

16.  K Panbarasu, VR Ranganath, RV Prakash, An experimental study on impact behavior of quasi-isotropic CFRP laminates, Materials Today: Proceedings 44, 289-293 (2021).

17.  SS Toshniwal, RV Prakash, Energy Absorption Characteristics of Single and Double-Walled Square Tubes Subjected to Axial Crushing, Advances in Mechanical Engineering, 361-369 (2021)

18.  K Panbarasu, VR Ranganath, RV Prakash, An investigation on static failure behaviour of CFRP quasi isotropic laminates under in-plane and out-of-plane loads, Materials Today: Proceedings 39, 1465-1471 (2021)

19.  Dhaka, P., and Prakash, R. V., Qualitative Assessment of Contact Behavior in Fretting Wear of Dissimilar Mating Pairs using Frictional Dissipation Energy Density Approach, ASME Journal of Tribology, Vol 142, Aug 2020, DOI: 10.1115/1.4046569.

20.  Dhaka, P., and Prakash, R. V., Influence of System Compliance on Contact Stresses in Fretting, (2020) Lecture Notes in Mechanical Engineering, pp. 489-499. DOI: 10.1007/978-981-13-9008-1_40

21.  Prakash, R.V., John, M., Carboni, M. Estimation of Damage Due to Fatigue, Impact Loading in CFRP Laminates Through Multi-sampling Image Analysis Technique (2020) Lecture Notes in Mechanical Engineering, pp. 403-412. DOI: 10.1007/978-981-13-9008-1_32

22.  Dhaka, P., Prakash, R.V. Contact stress analysis during fretting of a surface modified flat-on-flat with round edge (2019) ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE), 12, DOI: 10.1115/IMECE2019-11222

23.  Prakash, R.V., Viswanath, V. Effect of sea-water environment on the tensile and fatigue properties of synthetic yarns (2019) ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE), 12, DOI: 10.1115/IMECE2019-10230

24. Nagarajan, S., and Raghu V Prakash, “A new patterning method for microstructural strain mapping of Al-5754 alloy using image Correlation”, Experimental Techniques, 42 (4), pp 453-458, 2018.
25. John, M. and Prakash, R.V., “Quantification of fatigue damage in carbon fiber composite laminates through image processing”, Materials Today: Proceedings, 5 (9), pp 16995-17005, 2018.
26. Prakash, R. V. and Sampath, D., “Effect of hold-time interspersed with cyclic loading on corrosion fatigue crack growth rate of a steel in sodium chloride solution”, Proceedings of ASME International Mechanical Engineering Congress & Exposition, Vol 12, 2018 (Honorable Mentions Award).
27. Prakash, R.V., John, M., and Carboni, M., “A multiple-loading single-sample exploratory method of estimating damage in polymer composite materials through analysis of X-ray tomography images”, American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP, 6B-2018.
28. Prakash, R.V., and Maharana, M., “Post-fatigue creep and stress relaxation response of a hybrid polymer composite”, ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE), 14, 2017 (Honorable Mentions Award).
29. Prakash, R.V., John, M., Sudevan, D., Gianneo, A., and Carboni, M., “Fatigue studies on impacted and unimpacted CFRP laminates”, ASTM Special Technical Publication, Volume STP 1598, pp 94-118, 2017.
30. Sudalaiyandi, A.K., Krishnamurthi, R., and Prakash, R.V., “Large deformation strain measurement using digital image correlation technique during axial crushing of an extruded AA-6063 tube”, ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE), 9, 2016.
31. Shammy, D., and Prakash, R.V., “Parametric analysis of factors influencing stiffness and crashworthiness of a ladder frame”, ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE), 12, 2016.
32. Raghu V. Prakash and Sampath Dhinakaran, “Understanding Fatigue Crack Growth Behavior at Low Frequencies for a Mn-Ni-Cr Steel in 3.5% NaCl Solution Under Controlled Cathodic Potential”, Materials Performance and Characterization, Vol. 4, No. 2, ASTM, Pa, USA, 2015.
33. Chandraprakash Chindam, C V Krishnamurthy, Krishnan Balasubramaniam and Raghu V Prakash, “Thermomechanical response of metals: Maxwell Vs. Kelvin-Voigt models”, Materials Science Engineering A, 2013, Vol 560, pp 54-61.
34. Hariharan, K and Raghu V Prakash, “Modification of fatigue strain-life equation for sheet metals considering anisotropy due to crystallographic texture”, Fatigue & Fracture of Engineering Materials & Structures, Vol 35, No. 5, pp 458-465, 2012.
35. Raghu V Prakash and Akash Bagla, “Fatigue Assessment of Bolts with and without Pretension Loading”, Journal of ASTM International (JAI), Vol 5, No. 9, Oct 2008. Also, ASTM STP 1508, ISBN: 978-0-8031-3416-4, 2008.
36. N. E. Ashbaugh, B. Dattaguru, M. Khobaib, T. Nicholas, Raghu V Prakash, T. S. Ramamurthy, B. R. Seshadri, R. Sunder, “Experimental and Analytical Estimates of Fatigue Crack Closure in an Aluminium-Copper Alloy- Part I: Laser interferometry and electron fractography”, J. of Fatigue and Fracture of Engg. Materials and Structures, Vol 20, No: 7, 1997, pp 951-962, 1997.
37. Raghu V Prakash, R. Sunder and E.I. Mitchenko, “A Study of Naturally Initiating Notch root Fatigue Cracks Under Spectrum Loading”, Advances in Fatigue Lifetime Predictive Techniques: Third Volume, ASTM STP 1292, pp 248-264, ASTM, Pa, 1996. ISBN 080312029X.