Publications
Publication Summary
|
Books |
1 |
|
International
Journal Papers International
Conference Proceedings |
45 3 |
|
International
Conference Presentations |
31 |
|
Technical
Posters Presented |
13 |
|
Total
No. of Citations |
993 |
|
h-index |
16 |
Book
|
1. Carbon Nanotubes Reinforced Metal Matrix
Composites by Arvind Agarwal, Srinivasa
Rao Bakshi and Debrupa Lahiri. Taylor and Francis Publishers (CRC
Press). |
|
Papers in Peer Reviewed
Journals (*as corresponding author)
2015
1. N.S.
Karthiselva, B.S. Murty, Srinivasa R.
Bakshi*. Low temperature synthesis of dense and ultrafine grained
zirconium diboride compacts by reactive spark plasma sintering. Scripta
Materialia http://dx.doi.org/10.1016/j.scriptamat.2015.08.005
2. Srinivasa.R.
Bakshi* and S.P. Harimkar. Surface Engineering for Extreme Conditions. JOM
67 (2015) 1526-1527
3. S.L.
Pramod, A.K. Prasada Rao, B.S. Murty, and Srinivasa
R. Bakshi*. Effect of Sc addition on the microstructure and wear
properties of A356 alloy and A356-TiB2 in situ composite. Materials and Design 24
(2015) 2185-2207
4. S.L.
Pramod, Srinivasa R. Bakshi,
and B.S. Murty. Aluminum-Based Cast In Situ Composites: A Review. Journal
of Materials Engineering and Performance 78 (2015) 85-94
5. S.
Karthiselva, B.S. Murty and Srinivasa
R. Bakshi*. Low temperature synthesis of dense TiB2 compacts
by reaction spark plasma sintering. Int. Journal of Refractory Metals and Hard
Materials 48 (2015) 201–210
2014
6. Rajeev
G.P., Kamaraj M., and Srinivasa R.
Bakshi*. Al-Si-Mn Alloy Coating on Aluminum Substrate Using Cold Metal
Transfer (CMT) Welding Technique. JOM 66[6] (2014) 1061-1067
7. Prathap
Chandran, Tadepalli Sirimuvva, Niraj Nayan, A.K. Shukla, S.V.S.Narayana Murty,
S.L. Pramod, S.C. Sharma, and Srinivasa
R. Bakshi*. Effect of Carbon Nanotube Dispersion on Mechanical
Properties of Aluminum-Silicon Alloy Matrix Composites. Journal of Materials Engineering
and Performance 23 (2014) 1028-1037
2013
8. A.K.
Shukla, Niraj Nayan, S.V.S.N. Murty, K. Mondal, S.C. Sharma, Koshy M. George
and Srinivasa R. Bakshi.
Processing copper–carbon nanotube composite powders by high energy milling. Materials
Characterization 84 (2013) 58-66
9. D.
Lahiri, V. Singh, G.R. Rodrigues, T.M.H. Costa, M.R. Gallas, Srinivasa R. Bakshi, S. Seal, and
A. Agarwal. Ultrahigh-pressure consolidation and deformation of tantalum
carbide at ambient and high temperatures. Acta Materialia 61 (2013) 4001–4009
10. Sandip
P. Harimkar, Srinivasa R. Bakshi
and Arvind Agarwal. Recent Developments in Surface Engineering of Materials. JOM
65 (2013) 739-740
11. Debrupa
Lahiri, Evan Khaleghi, Srinivasa R.
Bakshi, Eugene A. Olevsky, Arvind Agarwal. Graphene Induced
Strengthening in Spark Plasma Sintered Tantalum Carbide-Nanotube Composite. Scripta
Materialia 68 (2013) 285-288
12. A.K.
Shukla, Niraj Nayan, S.V.S.N. Murty, S.C. Sharma, Prathap Chandran, Srinivasa R. Bakshi, Koshy M. George.
Processing of copper–carbon nanotube composites by vacuum hot pressing
technique. Materials Science & Engineering A 560 (2013) 365-371
2012
13.
Srinivasa
R. Bakshi*,
Sandip P. Harimkar, Arvind Agarwal. Advances in Surface Engineering: Alloyed
and Composite Coatings. JOM 64 (2012) 680-681
14.
Kantesh Balani, Srinivasa R. Bakshi, Tarang
Mungole, and Arvind Agarwal. Ab-initio molecular modeling of interfaces in
tantalum-carbon system. Journal of Applied Physics 111
(2012) 063521
2011
15.
Srinivasa R.
Bakshi, Akanksha
Bhargava, Seyedreza Mohammadizadeh, Arvind Agarwal, Igor Tsukanov, “Computational Estimation of Elastic
Properties of Spark Plasma Sintered TaC by Meshfree and Finite Element Methods”
Computational
Materials Science 50 (2011) 2615-2620
16. Srinivasa R. Bakshi, Anup K. Keshri, and Arvind
Agarwal, “A Comparison of Mechanical and
Wear Properties of Plasma Sprayed Carbon Nanotube Reinforced Aluminum
Composites at Nano and Macro Scale”, Materials Science and Engineering A Vol.
528 (2011) 3375-3384
17. Srinivasa R Bakshi, Vishal Musaramthota, David A.
Virzi, Anup K. Keshri, Debrupa Lahiri, Virendra Singh, Sudipta Seal and Arvind
Agarwal. “Carbon Nanotube Reinforced
Tantalum Carbide Composites by Spark Plasma Sintering: Effect of SPS pressure,
Carbon Nanotube Length and Dispersion Technique,” Materials Science and Engineering
A 528 (2011) 2538-2547
18. Srinivasa R. Bakshi and A. Agarwal. “An analysis of the factors affecting
strengthening in carbon nanotube reinforced aluminum composites”, Carbon
Vol. 49 (2011) 533-544
19. Srinivasa R. Bakshi, V. Musaramthota, D. Lahiri, V.
Singh, S. Seal and A. Agarwal. “Spark
Plasma Sintered Tantalum Carbide: Effect of Pressure and nano-Boron Carbide
Addition on Microstructure and Mechanical Properties”, Materials Science and Engineering
A 528 (2011) 1287-1295
20. Ashish
Singh, Srinivasa R. Bakshi,
David A. Virzi, Anup K. Keshri, Arvind Agarwal, and Sandip P. Harimkar, "In-situ Synthesis of TiC/SiC/Ti3SiC2
Composite Coatings by Spark Plasma Sintering", Surface and Coatings Technology 205 (2011)
3840-3846
2010
21. Srinivasa R. Bakshi, Riken R. Patel and Arvind
Agarwal. "Thermal Conductivity of
Carbon Nanotube Reinforced Aluminum Composites: A Multi-scale Study using
Object Oriented Finite Element Method", Computational Materials Science Vol. 50 (2010) 419-428
22. Srinivasa R. Bakshi, Debrupa Lahiri and Arvind
Agarwal, “Carbon Nanotube Reinforced
Metal Matrix Composite - A Review”, International Materials Review Vol.
55
(2010) 41-64
23. Srinivasa R. Bakshi, Debrupa Lahiri, Riken R. Patel
and Arvind Agarwal, “Nanoscratch Behavior
of Carbon Nanotube Reinforced Aluminum Coatings” Thin Solid Films Vol. 518
(2010) 1703-1711
24. Yao Chen, Srinivasa R. Bakshi and A.
Agarwal, “Correlation between
Nanomechanical and Nanotribological Properties of Carbon Nanotube Reinforced
Aluminum Composite Coatings”, Surface and Coatings Technology Vol.
204 (2010) 2709-2715
25. Ashish
Singh, Srinivasa R. Bakshi,
Arvind Agarwal and Sandip P. Harimkar. “Microstructure
and Tribological Behavior of Spark Plasma Sintered Iron-based Amorphous
Coatings”, Materials Science and Engineering A Vol. 527 (2010) 5000-5007
26. Debrupa
Lahiri, Shabnam Namin, Tanisha Richard, Anup K. Keshri, Srinivasa R. Bakshi, Nikolaos Tsoukias, Arvind Agarwal, “Mechanical Properties and Biocompatibility
of Polylactide-Polycaprolactone Copolymer Reinforced with Boron Nitride
Nanotubes”, Acta Biomaterialia Vol. 6 (2010) 3524–3533
27. K. Balani, Srinivasa R. Bakshi, D. Lahiri,
and Arvind Agarwal, “Grain
Growth Behavior of Aluminum Oxide Reinforced with Carbon Nanotubes During
Plasma Spraying and Post-Spray Consolidation", International Journal of Applied Ceramic Technology Vol. 7[6] (2010) 846-855
2009
28. Srinivasa R. Bakshi, Yao Chen, Timothy Price, Deen
Zhang, Anup Kumar Keshri, D. Graham McCartney, Phil Shipway and Arvind Agarwal,
“Microstructure and Wear Properties of
Aluminum/Aluminum-Silicon Composite Coatings Prepared by Cold Spraying”, Surface
and Coatings Technology Vol. 204 (2009) 503-510
29. Srinivasa R. Bakshi, Ruben G. Batista and Arvind
Agarwal, “Quantification of Carbon
Nanotube Dispersion in Randomly Oriented Nanocomposites”, Composites
Part A Vol. 40 (2009) 1311-1318
30.
Srinivasa R.
Bakshi, Anup K. Keshri, Virendra Singh, Sudipta Seal, Arvind Agarwal, “Interface in Carbon Nanotube Reinforced
Aluminum Silicon Composites: Thermodynamic Analysis and Experimental
Verification”, Journal of Alloys and Compounds Vol. 481 (2009) 207-213
31. Srinivasa R. Bakshi, Virendra Singh, Sudipta Seal,
Arvind Agarwal, “Aluminum Composite
Reinforced with Multiwalled Carbon Nanotubes from Plasma Spraying of Spray
Dried Powders”, Surface and Coatings Technology Vol. 203 (2009) 1544-1554
32. K. Balani,
D. Lahiri, A.K. Keshri, Srinivasa R.
Bakshi, J.E. Tercero and A. Agarwal.
"The Nano-scratch Behavior of Biocompatible Hydroxyapatite Reinforced with
Aluminum Oxide and Carbon Nanotubes", Journal
of Metals Vol. 61 (2009) 63-66
33. Debrupa
Lahiri, Srinivasa R. Bakshi,
Anup K. Keshri, Y. Liu and Arvind Agarwal, “Dual Strengthening Mechanisms Induced by
Carbon Nanotubes in Roll Bonded Aluminum Composites” Materials
Science and Engineering A Vol. 523 (2009) 263-270
34. Anup Kumar
Keshri, Kantesh Balani, Srinivasa R.
Bakshi, Virendra Singh, Tapas Laha, Sudipta Seal and Arvind Agarwal,
“Structural Transformation in Carbon
Nanotubes During Thermal Spraying”, Surface and Coatings Technolgy Vol.
203 (2009) 2193-2201
35.
Yao Chen, Srinivasa R.
Bakshi and A. Agarwal, “Inter-Splat
Friction Force for Splat Sliding in Plasma Sprayed Aluminum-alloy Coating
During Nanoindentation and Microindentation” ACS Applied Materials &
Interfaces Vol. 1(2) (2009) 235-238
36.
Venkata Pasumarthi, Yao Chen, Srinivasa
R. Bakshi and Arvind Agarwal. “Feasibility
study of Ti3SiC2 Phase Synthesis via Reactive Plasma
Spraying” Journal of Alloys and Compounds
Vol. 484 (2009) 113-117
37. Anup Kumar
Keshri, Srinivasa R. Bakshi,
Yao Chen, Tapas Laha, Xiaohua Li, Cesar Levy and Arvind Agarwal, “Nanomechanical Behavior of Plasma Sprayed
PZT Coatings”, Surface Engineering Vol. 25[4] (2009) 270-275
2008
38. Srinivasa R. Bakshi, Virendra Singh, Kantesh Balani,
D. Graham McCartney, Sudipta Seal and Arvind Agarwal, “Carbon Nanotube Reinforced Aluminum
Composite Coating via Cold Spraying”, Surface and Coatings Technology Vol.
202 (2008) 5162-5169
39. Srinivasa R. Bakshi, Virendra Singh, D. Graham
McCartney, Sudipta Seal and Arvind Agarwal, “Deformation and Damage Mechanisms of Multiwalled Carbon Nanotubes Under
High Velocity Impact”, Scripta Materialia Vol. 59 (2008 )
pp. 499-502
40. Srinivasa R. Bakshi, K. Balani, and A. Agarwal,
"Thermal Conductivity of Plasma
Sprayed Aluminum Oxide-Multiwalled Carbon Nanotube Composites", Journal
of American Ceramic Society Vol. 91[3] (2008) pp. 942–947
2007
41. Srinivasa R. Bakshi, J.E. Tercero, and A. Agarwal, “Synthesis and characterization of multiwalled carbon nanotube reinforced ultra high molecular weight polyethylene composite by electrostatic spraying technique”, Composites: Part A Vol. 38 (2007) pp. 2493–2499
42. Srinivasa R. Bakshi, K. Balani, T. Laha, J. Tercero,
and A. Agarwal, "The Nanomechanical
and Nanoscratch Properties of MWNT Reinforced Ultrahigh-Molecular-Weight
Polyethylene Coatings", Journal of Metals July 2007 pp.
50-53
43. Srinivasa R. Bakshi, T. Laha, K. Balani, A. Agarwal
and J. Karthikeyan, "Effect of
carrier gas on mechanical properties and fracture behavior of cold sprayed
aluminum coatings", Surface Engineering Vol. 23[1]
(2007) pp. 18-22
44. K. Balani, Srinivasa R. Bakshi, Y. Chen, T.
Laha and A. Agarwal, “Role of Powder Treatment and CNT Dispersion
in the Fracture Toughening of Plasma-Sprayed Aluminum Oxide – Carbon Nanotube
Ceramic Nanocomposite,”
Journal
of Nanoscience and Nanotechnology Vol.7[10]
(2007) pp.3553–3562
2006
45. Dheeraj
Jain, C.G.S. Pillai, Srinivasa R.
Bakshi, R.V. Kulkarni, E. Ramdasan and K.C. Sahoo, “Thermal diffusivity and thermal conductivity
of thoria–lanthana solid solutions up to 10 mol.% LaO1.5”, Journal
of Nuclear Materials Vol. 353 (2006) pp. 35–41
Conference
Proceedings Publications
1. N.S. Karthiselva, B.S. Murty, and Srinivasa R. Bakshi*. Densification
and mechanical properties of ZrB2-TiB2 ultra high
temperature ceramic composites. Ceramic Engineering and Science Proceedings
35[8] (2014) 275-285
2. Srinivasa R.
Bakshi, Prathap Chandran, M. Jagannatham. Development of
Al/CNT composites by powder metallurgy techniques-A Review. Processing and Fabrication of Advanced
Materials XXI (PFAM-21), 10-13 Dec., 2012, IIT Guwahati, India, Paper
28 (5 pages)
3. Srinivasa R. Bakshi and Arvind Agarwal, "Multiwalled Carbon Nanotubes
Reinforced Aluminum Silicon Composites by Plasma Spraying of Spray Dried
Powders", Proceedings of the 2008 NSF Engineering Research and Innovation
Conference, Knoxville, Tennessee, Jan 7 -10th 2008
Technical Reports
1. “IREE Proposal DMI-0634949 - Multi-walled Carbon Nanotube
Reinforced Aluminum Nanocomposites by Cold Kinetic Spraying”, National
Science Foundation, Oct 2007 http://globalhub.org/resources/880/download/Bakshi.pdf
Conference
Presentations
1. Anand
Sekhar R, Niraj Nayan, G Phanikumar, Lakshman Neelakantan and Srinivasa
Rao Bakshi. Microstructure and Mechanical, Corrosion and Oxidation
Properties of NiTiCuFe Multi-Component Alloy. Presented in National
Workshop on High Entropy Alloys organized on March 28-29, 2015 IIT
Madras
2. N.V.V.V.R. Rajesh, B.
Pravallika, N.S. Karthiselva, K.Vasanthakumar, Debalina Bhattacharjee, M.
Kamaraj and Srinivasa R. Bakshi. Thermally Sprayed Fly-Ash
Coatings on Mild Steel Substrates. 6th
Asian Thermal Spray Conference in Hyderabad held on 24-26th Nov. 2014
3. Rajeev G.P., Kamaraj M., and Srinivasa
R. Bakshi. Al-Si-Fe Coatings on 6061 Aluminium Alloy Using Cold Metal
Transfer Technique. 2014 TMS Annual
Meeting and Exhibition, Feb. 16-20, 2014, San Diego, USA
4. Rajeev G.P., Kamaraj M., and Srinivasa
R. Bakshi. Comparision of Stellite Coatings on Valve Steel Material
Prepared by Plasma Transferred Arc and Cold Metal Transfer Techniques. 2014 TMS Annual Meeting and Exhibition,
Feb. 16-20, 2014, San Diego, USA
5. Satish Gautam, Chrishtopher David,
Karthiselva N.S., B.K. Panigrahi, Nitin Wasekar and Srinivasa R. Bakshi.
Effect of Nanocrystalline Grain Size on Mechanical Property Variation during
Irradiation of Electrodeposited Nickel Coatings. 2014 TMS Annual Meeting and Exhibition, Feb. 16-20, 2014, San
Diego, USA
6. Srinivasa R. Bakshi, Anup K. Keshri, Debrupa Lahiri and Arvind
Agarwal. “Microstructural evolution and multi-scale wear properties of
Al-Si-CNT composites coating prepared by plasma spraying”. Heat Treatment and Surface Engineering Conference and Expo 2013,
Chennai, India, 16-18 May, 2013
7. K. Vasanthakumar, N. S. Karthiselva,
Niraj Chawake, Prathap Chandran and Srinivasa Rao Bakshi. “Synthesis
of Ti/TiC composites by mechanical milling followed by spark plasma sintering
of Ti-CNT mixtures”. 2013 TMS Annual
Meeting and Exhibition, March 3-7, 2013, San Antonio, USA
8. G. Gautham Prakash, S. L. Pramod,
Prathap Chandran, Cheng Zhang, Arvind Agarwal, Daniel Fabijanic, and Srinivasa
Rao Bakshi. “Microstructure and wear properties of Ni-Cu-Cr-Al
multi-component coatings prepared by plasma spraying”. 2013 TMS Annual Meeting and Exhibition, March 3-7, 2013, San
Antonio, USA
9. Prathap Chandran, Shyam Kumar, Niraj Chawake, N. Karthiselva, Niraj Nayan, SVS Narayana
Murty and Srinivasa Rao Bakshi. “Mechanical properties and
dispersion characteristics of aluminum composites reinforced with carbon
nanotubes of different diameters”. 2013
TMS Annual Meeting and Exhibition, March 3-7, 2013, San Antonio, USA
10. Srinivasa R.
Bakshi. “Development of
Al/CNT composites by powder metallurgy techniques-A Review”. Processing and Fabrication of Advanced
Materials XXI (PFAM-21), 10-13 Dec., 2012, IIT Guwahati, India
11. Prathap Chandran, Sunita Patra, Niraj
Chawake, Shyam Kumar, N. Karthiselva, S. L. Pramod, Niraj Nayan, Srinivasa
R. Bakshi. “An attempt on synthesis of Fe-Cementite nanocomposites from
Fe-CNT powders by powder metallurgy techniques”. Processing and Applications of Advanced Materials XXI (PFAM-21),
December 10-13, 2012, Guwahati, India
12. Prathap Chandran, Shyam Kumar, Niraj
Chawake, N. Karthiselva, Niraj Nayan,
S.V.S.N. Murty, Srinivasa R. Bakshi. “Effect of carbon nanotube
(CNT) diameter on the dispersion by ball milling and mechanical properties of
Al-CNT composites”. Processing and
Applications of Advanced Materials (PFAM-21), December 10-13, 2012,
Guwahati, India
13. Srinivasa Rao Bakshi. “Processing and Mechanical Properties of Carbon
Nanotube Reinforced Aluminum Matrix Composites”. 4th International Conference on Advanced Nano Materials
(ANM-2012), Oct. 17-19, 2012, IIT Madras, Chennai, India
14. G. Gautham Prakash, S. L. Pramod,
Prathap Chandran, Cheng Zhang, Arvind Agarwal, Daniel Fabijanic, Srinivasa
R. Bakshi. “Microstructure and properties of Ni-Cu-Cr-Al
multi-component coatings prepared by plasma spraying followed by surface
mechanical attrition”. 3rd
Asian Symposium on Materials and Processing (ASMP2012), August 30-31,
2012, IIT Madras, Chennai, India
15. Prathap Chandran, T. Sirimuvva, S. L.
Pramod, Srinivasa R. Bakshi, Niraj Nayan, S.V.S. Narayana Murty. “Effect
of Carbon Nanotube Dispersion on Mechanical Properties of Powder Metallurgy
Processed Al-CNT Composites”. International
Conference on Strength of Materials (ICSMA-16), August 19-24,2012,
Bangalore India.
16. Srinivasa Rao Bakshi and Arvind Agarwal. “Multiscale mechanical and
tribological behavior of plasma sprayed carbon nanotube reinforced aluminum
composites”. 2012 TMS Annual Meeting
and Exhibition, Orlando, USA, 11-15 March, 2012
17. Srinivasa Rao Bakshi and Arvind Agarwal. “Mechanical properties at
different length scales and factors affecting strengthening in carbon nanotube
reinforced aluminium composites”. 49th
National Metallurgists' Day and 65th Annual Technical Meeting of The
Indian Institute of Metals, Hyderabad, 13-16 November, 2011.
18. Srinivasa R. Bakshi and Arvind Agarwal. “Correlation Between
Tribological Properties of Carbon Nanotube Reinforced Aluminium Composites at
Nano and Macro Length Scales”. Workshop
on Mechanical Behaviour of Systems at Small Length Scales, Trivandrum,
18-21 September, 2011.
19. Srinivasa R. Bakshi
and Arvind Agarwal. “Microstructure
and Mechanical Properties of Tantalum Carbide Reinforced with Carbon
Nanotubes”. AFOSR Biennial Review
Meeting, Dayton, Ohio, 21-22 Sept., 2010
20. Srinivasa
R. Bakshi, Vishal Musaramthota and Arvind
Agarwal. “Synthesis and Characterization of Multi-walled Carbon
Nanotube Reinforced Tantalum Carbide Composites via Spark Plasma Sintering”. 12th
International Conference on Modern Materials and Technologies CIMTEC-2010,
Tuscany, Italy, June 6-11, 2010
21. Srinivasa
R. Bakshi, Ruben G. Batista and Arvind Agarwal. “Quantification
of Carbon Nanotube Distribution and Property Correlation in Nanocomposites”. 2010
TMS Annual Meeting and Exposition, Seattle, Washington, Feb 14-18, 2010
22. Srinivasa R. Bakshi,
Yao Chen, Anup K. Keshri, D. Graham McCartney, Phil Shipway and Arvind Agarwal.
“Wear Behavior of Aluminum/Aluminum-Silicon Composite Coatings Prepared by Cold
Spraying”. International Thermal Spray Conference ITSC-2009, Las Vegas, Nevada, May 4-7, 2009
23. Srinivasa R. Bakshi,
Virendra Singh, Sudipta Seal, and Arvind Agarwal. “Synthesis and
Characterization of Multiwalled Carbon Nanotube Reinforced Aluminum Nanocomposite
Via Plasma Spraying of Spray Dried Powders”. International Thermal Spray
Conference ITSC-2009, Las
Vegas, Nevada, May 4-7, 2009
24. Srinivasa R. Bakshi, Debrupa Lahiri and Arvind Agarwal. “Nanotribological
Properties of Carbon Nanotube Reinforced Plasma Sprayed Aluminum-Silicon alloy
Composite Coatings”. 2009 TMS Annual Meeting and Exposition,
San Francisco, California, Feb 15-19, 2009
25. Srinivasa R. Bakshi, Virendra Singh, Sudipta Seal, D. Graham McCartney, and Arvind
Agarwal. “Multiwalled Carbon Nanotube
Reinforced Aluminum Composite Coating via Cold Kinetic Spraying”. MS&T 2008, Pittsburgh,
California, Oct 5-9th 2008
26.
Srinivasa R. Bakshi,
On “The Role of Secretary and
Treasurer” on behalf of Material Advantage Chapter of FIU. MS&T 2008 Chapter Leadership
Workshop, Pittsburgh, California, Oct 5-9th 2008
27.
Srinivasa
R. Bakshi, Tapas Laha, Kantesh Balani, Arvind Agarwal and
J. Karthikeyan. “Effect of carrier gas on microstructure, electrochemical and
mechanical properties of cold sprayed Al 1100 coating on Al 1100” International
Thermal Spray Conference ITSC-2006
Seattle, Washington, May 15-18th 2006
28. D. Lahiri,
S. Namin, T. Richard, A. K. Keshri, Srinivasa R. Bakshi, N. Tsoukias, and A.
Agarwal. “Copolymer-Boron Nitride Nanotube Composite for Biodegradable Scaffold
application”. Southern Biomedical Engineering Conference-2009, Miami, May
15-17, 2009
29. A. K. Keshri, K. Balani, T. Laha, Srinivasa R. Bakshi, and A. Agarwal, “Comparative Study of Carbon Nanotubes/Plasma
Interaction during Various Thermal Spray Processes”. International
Thermal Spray Conference ITSC-2009,
Las Vegas, Nevada, May 4-7, 2009
30.
Kantesh Balani, Tao Zhang, Srinivasa R.
Bakshi, Wenzhi Li, and Arvind Agarwal. “Fracture
Toughness Enhancement via Plasma Spraying of Insitu Grown CNT - Al2O3 Nanocomposite
Coating”. 2007 TMS Annual Meeting and Exposition,
Orlando, FL, Feb. 25- Mar. 1, 2007.
31.
Kantesh Balani, Tapas Laha, Srinivasa R.
Bakshi, and Arvind Agarwal. “CNT Dispersion in Plasma Sprayed Nano-Al2O3 – CNT Nano-Composite
Coating”. MS&T 2006, Cincinnati, OH, Oct. 15-19, 2006.
Poster
Presentations
1.
Srinivasa R. Bakshi. Effect of Carbon Nanotube (CNT)
Diameter on the Microstructure and Properties of Al-CNT Composites. 2014 TMS Annual Meeting and Exhibition,
Feb. 16-20, 2014, San Diego, USA
2.
Srinivasa R. Bakshi and Karthiselva. N.S. Reactive Spark
Plasma Sintering of TiB2-CNT Ultra-high Temperature Ceramic Composites. 2014 TMS Annual Meeting and Exhibition,
Feb. 16-20, 2014, San Diego, USA
3. Srinivasa R. Bakshi,
Kantesh Balani, Graham McCartney and Arvind Agarwal. “Carbon nanotubes
reinforced aluminum composite coating by cold spray technique”. Heat
Treatment and Surface Engineering Conference and Expo 2013, Chennai,
India, 16-18 May, 2013
4. Srinivasa R. Bakshi,
Vasanthakumar K, and Karthielva N.S. “Synthesis of Ti-TiC Nanocomposites by
in-situ Reaction of Ti-Carbon Mixtures”. In TMS Technical Division Young
Professional Poster Contest. 2013 TMS Annual Meeting and Exhibition,
March 3-7, 2013, San Antonio, USA
5. Prathap
Chandran, Shyam Kumar, Niraj Chawake, N.
Karthiselva, Sriram Lunavath, Niraj Nayan, SVS Narayana Murty and Srinivasa Rao Bakshi. “Effect of
carbon nanotube (CNT) diameter on the microstructure and mechanical properties
of Al-CNT composites”. International Conference on Recent Advances
in Composite Materials (ICRACM-2013), Feb, 18-21, 2013, Goa, India
6. K.
Vasanthakumar, Karthiselva S., Niraj Chawake, Prathap Chandran, Srinivasa R. Bakshi. “Synthesis
of Ti/TiC composites by mechanical milling followed by spark plasma sintering
of Ti-CNT mixtures”. 50th National Metallurgists Day
Meeting, Nov. 16-19, 2012, Jamshedpur, India
7. N.S. Karthiselva, S.
Praveen, B. S. Murty, Srinivasa R. Bakshi. “Reactive sintering and mechanical
properties of ZrB2/TiB2 composites processed by Spark Plasma Sintering”. 50th National Metallurgists Day Meeting,
Nov. 16-19, 2012, Jamshedpur, India
8. S.L. Pramod, A. Elsayed, Srinivasa
R. Bakshi, B.S. Murty, C. Ravindran. “Processing
and mechanical properties evaluation of in-situ AZ91- TiB2/TiC reinforced
composites”. 5th International Conference on Solidification Science and
Processing (ICSSP-5), 19-22 Nov. 2012, Bhubaneswar, India
9. Srinivasa R. Bakshi, Riken
R. Patel and Arvind Agarwal. "Carbon Nanotube Reinforced Aluminum Coatings
and Near Net Shape Structures with Improved Dispersion by Plasma Spraying of
Spray Dried Powders". 2009 NSF Engineering Research and Innovation
Conference, June 22-25, 2009, Honolulu, Hawaii, USA
10. Srinivasa R. Bakshi and Arvind Agarwal. “CNT Reinforced Aluminum Nanocomposite
with Improved Dispersion by Plasma Spray Forming of Spray Dried Powders”. In
Students Technical Poster Competition at 2009 TMS Annual Meeting and Exhibition,
Feb 15-19, 2009, San Francisco, California, USA
11. Srinivasa R. Bakshi and Arvind Agarwal.
"Near Net Shape Forming of Carbon Nanotube reinforced Aluminum
Nanocomposites by Plasma Spray Forming". 2008 NSF Engineering Research and
Innovation Conference, Jan 7 -10, 2008, Knoxville, Tennessee, USA
12. Srinivasa R. Bakshi and Arvind Agarwal.
"Multi-walled Carbon Nanotube Reinforced Aluminum Nanocomposites by Cold
Kinetic Spraying", 2007 NSF Grantee conference on International
Research and Education in Engineering, Oct. 30 - Nov. 1, 2007, Purdue
University, West Lafayette, Indiana, USA
13.
Srinivasa R. Bakshi and Arvind
Agarwal. “Effect of carrier gas on microstructure, electrochemical and
mechanical properties of cold sprayed Al 1100 coating on Al 1100”. In Students
Technical Poster Competition at TMS-2006 Annual Meeting and Exhibition,
Mar. 12-16, 2006, San Antonio, Texas, USA