IIT Madras_logo

Prof. J. M. Mallikarjuna
Department of Mechanical Engineering, IITM

Publications

(Scopus ID: 6505887097, Researcher ID: F-3442-2015)

  1. Saw, O. P., Addepalli, S.K., and Mallikarjuna, J.M., "Effects of Cylinder Head Geometry on Mixture Stratification, Combustion and Emissions in a GDI Engine - A CFD Analysis," SAE Technical Paper 2019-01-0009, 2019, doi:10.4271/2019-01-0009.

  2. Raut, A. A. and Mallikarjuna, J. M., "Effect of Water Injection and Spatial Distribution on Combustion, Emission and Performance of GDI Engine-A CFD Analysis," SAE Technical Paper 2018-01-1725, 2018, doi:10.4271/2018-01-1725.

  3. Karaya, Y., Addepalli, S. K., and Mallikarjuna, J. M., "Comparison of Conventional Intake Port and Swirl Intake Port on Mixture Formation in a GDI Engine - A CFD Analysis," SAE Technical Paper 2019-01-0010, 2019, doi:10.4271/2019-01-0010.

  4. Karaya, Y., Addepalli, S. K., and Mallikarjuna, J. M., "Effect of Fuel Injector Location and Nozzle-Hole Orientation on Mixture Formation in a GDI Engine: A CFD Analysis," SAE Technical Paper 2018-01-0201, 2018, doi:10.4271/2018-01-0201.

  5. Yashas Karaya and J. M. Mallikarjuna, Effect of Piston Profile on Performance and Emission Characteristics of a GDI Engine with Split Injection Strategy – A CFD Study, The 2nd International Conference on Computational Fluid Dynamics in Research and Industry 2017 (CFDRI 2017), IOP Conference Series: Materials Science and Engineering, Aug 3 – 4, 2017 at BP Samila Beach Hotel, Songkhla, Thailand.

  6. Guru Kiran H. R. and J. M. Mallikarjuna, Effect of Fuel Injection Parameters on Performance and Emission Characteristics in HCCI Engine - A CFD Study, JSAE 20179096 / SAE 2017-32-0096, Small Engine Technology Conference 2017 (SETC2017), Nov 15–17, 2017, Jakarta, Indonesia.

  7. Saw, O. P., Karaya, Y., and Mallikarjuna, J. M., "Effect of Fuel Injection Pressure on Mixture Stratification in a GDI Engine – A CFD Analysis," SAE Technical Paper 2017-01-2317, 2017, doi:10.4271/2017-01-2317.

  8. Jadhav, P. and Mallikarjuna, J. M., "Effect of EGR on Performance and Emission Characteristics of a GDI Engine - A CFD Study," SAE Technical Paper 2017-24-0033, 2017, doi:10.4271/2017-24-0033, 2017.

  9. Abhilash Reddy, A. and Mallikarjuna, J. M., Parametric Study on a Gasoline Direct Injection Engine – A CFD Analysis, SAE Technical Paper No. 2017-26-0039. doi:10.4271/2017-26-0039, SIAT 2017, Pune, India.

  10. Saw, O. P. and Mallikarjuna, J. M., Effect of spark plug and fuel injector location on mixture stratification in a GDI engine - A CFD analysis, The 2nd International Conference on Computational Fluid Dynamics in Research and Industry 2017 (CFDRI 2017), IOP Conference Series: Materials Science and Engineering, Aug 3 – 4, 2017 at BP Samila Beach Hotel, Songkhla, Thailand.

  11. Krishna Addepalli S. and J. M. Mallikarjuna, Optimization of fuel injection timing in a GDI engine to reduce emissions – A CFD Analysis, Proceedings of the International Conference on Development of Smart Cities: Interface, Governance and Technology, Sep 9 - 10, Dr. Ambedkar Institute of Technology Bengaluru, India, 2016.

  12. Om Prakash Saw and J. M. Mallikarjuna, Comparison of In-Cylinder Flows in a Gasoline Direct Injection Engine with and without Fuel Injection – A CFD Analysis, Proceedings of the International Conference on Development of Smart Cities: Interface, Governance and Technology, Sep 9 - 10, Dr. Ambedkar Institute of Technology Bengaluru, India, 2016.

  13. Parveen Banu J., J. M. Mallikarjuna and A. Mani, Experimental and Numerical Investigations of Ejector Jet Refrigeration System with Primary Stream Swirl, Proceedings of 16th International Refrigeration and Air Conditioning Conference, Purdue, USA, 2045, pp 1-10, July 11-14, 2016.

  14. Naga Praveen Babu, M., P. Krishnankutty and J. M. Mallikarjuna, Experimental Study of Flapping Foil Propulsion System for Ships and Underwater vehicles and PIV Study of Caudal Fin Propulsors, 2014 IEEE/OES Autonomous Underwater Vehicles (AUV), Oct 6-9, 2014.

  15. Gnana Sagaya Raj, A., J. M. Mallikarjuna and V. Ganesan, CFD Analysis of Combustion on Direct Injection Diesel Engine with two Different Piston Bowl Configurations, 9th Asia-Pacific Conference on Combustion, Gyeongju, Korea, 19-22 May, 2013.

  16. Harshavardhan, B. and J. M. Mallikarjuna, CFD analysis of in-cylinder flow and air-fuel interaction on different combustion chamber geometry in DISI engine, International Conference on Mechanical and Industrial Engineering (ICMIE-2013), March 24, Chandigarh, India, 2013.

  17. Suresh Kumar, J., V. Ganesan, J. M. Mallikarjuna and S. Govindarajan, Spray Characteristics of a Fuel Injector – A CFD Study, F2012-A02-003. FISITA 2012, World Automotive Congress, Nov 27-30, Beijing, China, 2012.

  18. Vikas, R., J. M. Mallikarjuna and V. Ganesan, 3-D Numerical Study of Effect of Flow Parameters upon the Uniformity of NH3 in Urea-SCR, Proceedings of 3rd International Conference on Mechanical, Industrial, and Manufacturing Technologies (MIMT 2012), Shenzhen, China, March 24-25, 2012.

  19. Gnana Sagaya Raj, A., J. M. Mallikarjuna and V. Ganesan, Flow Investigation on Different Combustion Chamber Configuration in a DI Diesel Engine – A CFD Approach, Proceedings of 3rd International Conference on Mechanical, Industrial, and Manufacturing Technologies (MIMT 2012), Shenzhen, China, March 24-25, 2012.

  20. Harshit Kumar Gupta and Mallikarjuna, J M, Thermo-Kinetic Model to Predict Start of Combustion in Homogeneous Charge Compression Ignition Engine, Proceedings of International Conference on Mechanical, Production and Automobile Engineering (ICMPAE-2011), Pattaya, Thailand, Dec 17-18, 2011.

  21. Krishna, A. S., Y. Ramachandra Babu, Davinder Kumar and J. M. Mallikarjuna, Effect of Ports Configuration on Trapping Efficiency of a Two-Stroke Engine – A CFD Analysis, Proceedings of SAE 10th International Conference on Engines & Vehicles, Paper No. 2011-24-0153, Capri, Napoli, Italy, Sep 11-15, 2011.

  22. Murali Krishna, B and J. M. Mallikarjuna, Cycle-by-Cycle Variation in an Internal Combustion Engine - An Analysis Using Particle Image Velocimetry, Proceedings of The Tenth Asian Symposium on Visualization, Chennai, India, March 1-5, 2010.

  23. Murali Krishna, B and J. M. Mallikarjuna, Effect of Intake Manifold Orientation on In-Cylinder Tumble Flow Structure in an Internal Combustion Engine − An Analysis Using Particle Image Velocimetry, Proceedings of SAEINDIA International Mobility Engineering Congress and Exposition 2009, SAE Paper No. 2009-28-0004, Chennai, India, Dec 13-15, 2009.

  24. Purushothama, H. R., J. M. Mallikarjuna and V. Ganesan, Part-Load Efficiency Improvement in a Spark Ignition Engine by Fuel Injection and Extended Expansion – An Experimental Study, Proceedings of International Conference and Exhibition on Advances In Energy Research (ICAER 2009), IIT Bombay, Mumbai, India, Dec 9–11, 2009.

  25. Murali Krishna, B and J. M. Mallikarjuna, Tumble Flows in Gasoline Direct Injection Engine – A Study Using Particle Image Velocimetry, Proceedings of International Conference on Applications and Design in Mechanical Engineering 2009 (ICADME 2009), Penang, Malaysia, Oct 11-13, 2009.

  26. Murali Krishna, B and J. M. Mallikarjuna, "Effect of Cavity in a Pentroof Piston on the Engine In-cylinder Tumble Flows-An Investigation by Particle Image Velocimetry’, Proceedings of World Congress on Engineering, London, UK, July 1-3, 2009.

  27. Murali Krishna, B and J. M. Mallikarjuna, Tumble flow analysis in an unfired engine using Particle Image Velocimetry, Proceedings of World Academy of Science, Engineering and Technology, Vol 54, ISSN 2070-3724, Paris, France, June 24-26, 2009.

  28. Purushothama, H. R., J. M. Mallikarjuna and V. Ganesan, Performance Characteristics of Fuel Injected Extended Expansion Spark Ignition Engine – An Experimental Investigation, Proceedings of International Conference on Emerging Research and Advances in Mechanical Engineering (ERA2009), VCE, Chennai, India, March 19-21, 2009.

  29. Murali Krishna, B., A. Biju Cherian and J. M. Mallikarjuna, Effect of manifold inclination on intake valve flow characteristics of a single cylinder engine using Particle Image Velocimetry, Proceedings of World Academy of Science, Engineering and Technology (PWASET), Vol 3, No. 6, 2009.

  30. Murali Krishna, B and J. M. Mallikarjuna, "Effect of Engine Speed on Intake Valve Flow Characteristics of a Diesel Engine - An Analysis Using Particle Image Velocimetry", Proceedings of the IEEE International Conference on Emerging Trends in Engineering and Technology (ICETET2008), Nagpur, India, pp 1071 – 1076, July 16-18, 2008.

  31. Murali Krishna, B and J. M. Mallikarjuna, "Flow through Intake Valve of a Direct Injection Diesel Engine – A Preliminary Study using Particle Image Velocimetry", Proceedings of the International Conference on Mechanical and Manufacturing Engineering 2008 (ICME2008), Johor, Malaysia, May 21-23, 2008.

  32. Swami Nathan, S., J. M. Mallikarjuna and A. Ramesh, "Effect of Adding N2 and CO2 on Control of Combustion in a Manifold Injected Homogeneous Charge Compression Ignition Engine – An Experimental Study", Proceedings of the International Conference on Mechanical and Manufacturing Engineering 2008 (ICME2008), Johor, Malaysia, May 21-23, 2008.

  33. Murali Krishna, B and J. M. Mallikarjuna, "Optical Diagnosis of Flow through the Intake Valve in a Direct Injection Diesel Engine", Proceedings of the 15th ISME International Conference on Advances in Mechanical Engineering, Bhopal, India, March 18-20, 2008.

  34. Murali Krishna, B and J. M. Mallikarjuna, "Intake Valve Flow Analysis in a Direct Injection Diesel Engine Using Particle Image Velocimetry", Proceedings of the 2nd International Conference on Recent Advances in Experimental Fluid Mechanics (RAEFM2008), Vijayawada, AP, India, March 3-6, 2008.

  35. Swami Nathan, S., J. M. Mallikarjuna and A. Ramesh, "HCCI Engine Operation with Acetylene the Fuel", Proceedings of 5th International Mobility Conference on Emerging Automotive Technologies Global and Indian Perspective, SAE Paper No. 2008-28-0032, pp 218-224, New Delhi, Jan 9-11, 2008.

  36. Jagadeesh, S. K., C. S. Ramesh and J. M. Mallikarjuna, "Prediction of cooling curves during solidification of Al 6061-SiCp based metal matrix composites using finite element analysis", Proceedings of International Conference on Computer Aided Engineering 2007, IIT Madras, Chennai, India, Dec 13-15, 2007.

  37. Swami Nathan, S., J. M. Mallikarjuna and A. Ramesh, "Effect of Intake Charge and Coolant Temperature on Combustion and Emissions of a HCCI Engine – An Experimental Study", Proceedings of the International conference & XX National Conference on I.C Engines and Combustion (ICONICE 2007), JNTU, Hyderabad, India, Dec 6-9, 2007.

  38. Bisrat Yoseph, S. Swami Nathan and J. M. Mallikarjuna, "Electrically Initiated Chemically Heated Catalytic Converter (EICHC) – An Experimental Study", Proceedings of the International conference & XX National Conference on I.C Engines and Combustion (ICONICE 2007), JNTU, Hyderabad, India, Dec 6-9, 2007.

  39. Govinda Samy, V and J. M. Mallikarjuna, "Optimization of Common Rail Fuel Injection System for Four-Cylinder Engine Application – An Experimental and Theoretical Approach", Proceedings of the International Conference & XX National Conference on IC Engines and Combustion (ICONICE 2007), JNTU, Hyderabad, India, Dec 6-9, 2007.

  40. Rajesh Ravi and J. M. Mallikarjuna, "Reduction of Nitric Oxides Emissions of a Hydrogen Fuelled Engine Using UREA-SCR Technology – An Experimental Study", Proceedings of the International Conference & XX National Conference on IC Engines and Combustion (ICONICE 2007), JNTU, Hyderabad, India, Dec 6-9, 2007.

  41. Manohar Reddy, S., J. M. Mallikarjuna and V. Ganesan, "Flow Analysis of a Ventilated Disc Brake Rotor Using PIV", Proceedings of the International Conference & XX National Conference on IC Engines and Combustion (ICONICE 2007), JNTU, Hyderabad, India, Dec 6-9, 2007.

  42. Anand Kumar, T., J. M. Mallikarjuna and V. Ganesan, "Effect of Ignition Timing on Combustion in a Stratified Charge DISI Engine", Proceedings of the Third International Conference on Thermal Engineering: Theory and Applications, Amman, Jordan, May 21-23, 2007.

  43. Anand Kumar, T., J. M. Mallikarjuna and V. Ganesan, "Effect of Injection Timing on Fuel - Air Mixing and Combustion in a Direct Injection Stratified Charge SI Engine", JRCICE2007-40047, ASME/IEEE Joint Rail Conference & Internal Combustion Engine Spring Technical Conference, Pueblo, Colorado, March 13-16, 2007.

  44. Manohar Reddy, S., J. M. Mallikarjuna and V. Ganesan, "Effect of Vane Shape on Flow and Heat Transfer Characteristics of a Disc Brake", Proceedings of the 3rd BSME-ASME International Conference on Thermal Engineering, Dhaka, Bangladesh, Dec 20-22, 2006.

  45. Manohar Reddy, S., J M Mallikarjuna and V. Ganesan, "Flow and Heat Transfer Analysis Through a Brake Disc – A CFD Approach", Proceedings of IMECE06 2006, ASME International Mechanical Engineering Congress and Exposition, Paper No: IMECE2006-1431, Chicago, Illinois, USA, Nov 5-10, 2006.

  46. Murali Krishna, B and J. M. Mallikarjuna, "The Use of Cotton Seed Oil in Direct Injection Diesel Engine as an Alternative Fuel", Proceedings of International Conference on Bio-Fuels Vision 2015, Bikaner, Rajasthan, India, Oct 13-15, 2006.

  47. Murali Krishna, B and J. M. Mallikarjuna, "Renewable Bio-diesel from CSO-A Fuel Option for Diesel Engines", Proceedings of ASME International Solar Energy Conference, Denver, USA, July 8-13, 2006.

  48. Anand Kumar, T., J. M. Mallikarjuna and V. Ganesan, "Multi-dimensional Modeling of Fuel-Air Mixing in a Direct Injection Gasoline Spark Ignition Engine Using KIVA-3V Code", Proceedings of 14th International Conference on Mechanical Engineering in Knowledge Age, Delhi College of Engineering, New Delhi, Paper No.325, Type 2, ICE/C, Dec 12-14, 2005.

  49. Subramanian, V., J. M. Mallikarjuna and A. Ramesh, "Performance, Emission and Combustion Characteristics of a Hydrogen Fuelled SI engine – An Experimental Study", Proceeding of International Mobility Engineering Congress and Expo-2005, SAEINDIA, Chennai, SAEINDIA Paper No. 2005-26-349, Oct 23-25, 2005.

  50. Mallikarjuna, J. M and K. Pradeep Kumar, "Computer Simulation of Gasoline Direct Injected (GDI) Extended Expansion Engine", SAE Paper No. 2005-26-057, Proceedings of Symposium of International Automotive Technology (SIAT 2005), ARAI, Pune, Jan 19-22, 2005.

  51. Mallikarjuna, J. M and V. Ganesan, "Variable Valve Timing and Variable Compression Ratio Engine for Improved Performance and Reduced Emissions at Part Loads  Numerical Predictions with Experimental Comparisons", Proceedings of Sixth International Conference on Small Engines, Their Fuels and the Environment, pp 118-124, Malaysia, April 22-24, 1999.