samuelgl@iitm.ac.in

044-2257-4699 (O)

logo

 Dr. G. L. Samuel
 Professor, IIT Madras

Publications

BOOK CHAPTER

Chapter Name : Measurement Systems for characterization of Micro / Nano finished surfaces
Publisher Name : Taylor and Francis group

Chapter Name : Laser Micromachining of semiconductor materials, Application of Lasers in Manufacturing. S Singh, GL Samuel (2019).
Publisher Name : Springer Publications, pp 111-141.

Reviewer

Books

  • TOOL DESIGN, Third Edition by Cyril Donaldson, George H Le Cain and VC Goold, Tata McGraw-Hill Publishing Company Ltd, New Delhi.
  • MACHINE DRAWING, Second Edition, Ajeet Singh, Tata McGraw Hill Education Private Limited, New Delhi.

Guest Editor

  • International Journal of Precision Technology, Special issue on "Advances in Precision and Micro Manufacturing".

International Journals (Refereed)

  1. Kanka Goswami G.L.Samuel "Non linear Model of energy consumption for In-process Control in Electrical discharge machining", Jinternational Journal of Advanced Manufacturing Technology 110 (5), 1543-1561
  2. S Niketh, G.L.Samuel "Surface Textured Drill Tools—An Effective Approach for Minimizing Chip Evacuation Force and Burr Formation During High Aspect Ratio Machining of Titanium Alloy", Journal of Manufacturing Science and Engineering , 143 (4)
  3. S Shalini, G.L.Samuel "Ultrafast pulse laser inscription and surface quality characterization of micro-structured silicon wafer", Journal of Manufacturing Processes, 323-336
  4. Kanka Goswami, G.L.Samuel "Monitoring of material removal mechanism in micro-electrical discharge machining buy pulse classification and acoustic emission", Proceedings of iMechE, Part B: Journal of Engineering Manufacture
  5. JS Krupa, G.L.Samuel "Fabrication and Characterization of Helical Grooved Cylindrical Electrodes Generated by WED Turning Process", Advances in Unconventional Machining and Composites, 437-449
  6. ISP Sushma, G.L.Samuel, "Numerical Analysis of Cutting Modes in High-Speed Machining of Aluminum Alloys with PCD and CBN Tool Inserts", Advances in Simulation, Product Design and Development, 313-325
  7. TM Shaju, G.L.Samuel, "Experimental Investigation and Finite Element Modelling of Electrical Discharge Machining Using Hollow Electrodes and Injection Flushing", Advances in Simulation, Product Design and Development, 65-77
  8. KK Kumar, G.L.Samuel, MS Shunmugam, "Characterization of Geometrical Features of Ultra-Short Pulse Laser-drilled Microholes Using Computed Tomography", Advances in Computational Methods in Manufacturing, 603-614
  9. Murugesh M and G.L.Samuel, "Machining of high quality microchannels on Ti6Al4V using ultra short pulsed laser", Advances in Micro and Nano Manufacturing and Surface Engineering, 411-422
  10. K. Kiran Kumar, M.S. Shunmugam and G.L.Samuel,(2019) Theoretical and experimental Investigations of Ultra-short Pulse Laser Interaction on Ti6Al4V alloy, Journal of Materials Processing Technology.
  11. Yugandhar Arcot, G.L.Samuel, Lingxue Kong, Nickel Stamp Fabrication using SU-8 Lithography for Micro Hot-Embossing Serpentine Microfluidic Channels, International Journal of Precision Technology, Vol. 8, Nos. 2/3/4, 2019.
  12. Giridharan A and G.L.Samuel (2018), Investigation into Erosion Rate of AISI 4340 steel during Wire Electrical Discharge Turning Process, Machining Science and Technology, Vo. 22, Isuue: 2, pp 287-298.
  13. Niketh S and G.L.Samuel, (2018), Surface texturing of Tribological Interfaces–An Experimental Analysis", Procedia Manufacturing 34, 33-41.
  14. Niketh S and G.L.Samuel, (2018), Drilling performance of micro textured tools under dry, wet and MQL condition, Journal of Manufacturing Processes, Vol.32, pp 254-268. Published online.
  15. Jagadesh T and G.L.Samuel, (2018), The influence of deep cryogenic treatment and in-situ cryogenic micro turning of Ti-6Al-4V on cutting forces, surface integrity and chip morphology, Int. J. Precision Technology, Published Online (DOI: 10.1504/IJPTECH.2019.10021804).
  16. K. Kiran Kumar, M.S. Shunmugam and G.L.Samuel, (2018) Theoretical and experimental Investigations of Ultra-short Pulse Laser Interaction on Ti6Al4V alloy, Journal of Materials Processing Technology, published Online.
  17. Niketh S and G.L.Samuel, (2018) Drilling perfomance of micro textured tools under dry, wet and MQL condition, Journal of Manufacturing Processes, vol. 32, No. 254 - 268.
  18. Giridharan A and G.L.Samuel, (2018) Investigation into Erosion Rate of AISI 4340 steel during Wire Electrical Discharge Turning Process, Machining Science and Technology, Vol. 22, Isuue: 2, pp 287-298.
  19. Niketh S and G.L.Samuel, (2017) Surface texturing for tribology enhancement and its application on drill tool for the sustainable machining of titanium alloy, Journal of Cleaner Production, Vol. 167, 253-270.
  20. Jagadesh T and G.L.Samuel, (2017) Finite element simulations of micro turning of Ti-6Al-4V using PCD and coated carbide tools, Journal of Institute of Engineers, Series C, 98(1):5–15.
  21. Giridharan A and G.L.Samuel, (2016) Analysis on the effect of discharge energy on machining characteristics of wire electrical discharge turning process, Journal of Engineering Manufacture, iMechE, Vol. 230(11) 2064–2081.
  22. Jagadesh, T and G.L.Samuel, (2015). Mechanistic and Finite Element Model for Prediction of Cutting Forces During Micro-Turning of Titanium Alloy. Machining Science and Technology, An International Journal, 19, 593-629.
  23. Rajesh Babu and G.L.Samuel, (2015) Dynamic response of a micro end mill cutter by mode superposition method and study of damping effect on its dynamic performance, International Journal of Precision Technology, Vol. 4, No. 3-4, 212-229.
  24. Kalyan. C and G.L.Samuel, (2015), Cutting mode analysis in high speed finish turning of AlMgSi alloy using edge chamfered PCD tools, Journal of Materials Processing Technology, 216, pp146–159.
  25. Shrey Ginoria, G.L.Samuel, G. Srinivasan, (2015) Optimization of a parallel machine scheduling problem using a genetic algorithm based heuristic, International Journal of Productivity and Quality Management, Vol. 15, No. 1, pp 36-56.
  26. Murugarajan. A and G.L.Samuel, (2015) Characterization of dimensional features of meso-scale component using capacitive sensor, International Journal of Advanced Manufacturing Technology, Vol. 77, pp1831–1849.
  27. Giridharan A and G.L.Samuel, (2015) Modeling and analysis of crater formation during Wire Electrical Discharge Turning (WEDT) process, The International Journal of Advanced Manufacturing Technology, Vol.77, Issue 5, pp 1229-1247.
  28. Adapa Sainath and G.L.Samuel (2014), Modelling and verification of stability of micro-milling process, International Journal of Machining and Machinability of Materials, 16(3-4), pp. 229–258.
  29. V. Rishikesan and G.L.Samuel, (2014), Evaluation of Surface Profile Parameters of a Machined Surface Using Confocal Displacement Sensor, Procedia Materials Science (Special Issue : International Conference on Advances in Manufacturing and Materials Engineering, ICAMME 2014), Vol. 5, pp 1385–1391.
  30. T. Jagadesh and G.L.Samuel, (2014) Investigations into Cutting Forces and Surface Roughness in Micro Turning of Titanium Alloy Using Coated Carbide Tool, Procedia Materials Science (Special Issue : International Conference on Advances in Manufacturing and Materials Engineering, ICAMME 2014), Vol. 5, pp 2450–2457.
  31. S.Basavarajappa, R Suresh, V.N Gaitonde, G.L.Samuel, (2014) Analysis of cutting forces and surface roughness in Hard Turning of AISI 4340 Using Multilayer Coated Carbide Tool, International Journal of Machining and Machinability of Materials, Vol. 16, No. 2, pp169-185.
  32. Giridharan A and G.L.Samuel, (2013) Investigation into energy consumption, surface roughness and material removal rate of cylindrical components machined using wire electrical discharge turning process, International Journal of Manufacturing Technology and Management, Vol.27, No.4/5/6, pp.170 – 185.
  33. Murugarajan A and G.L.Samuel (2013) Investigations into modeling and assessment of theoretical profiles using capacitive sensor, International Journal of Mechatronics and Manufacturing Systems, Vol. 6, No. 4, pp 288-309.
  34. R. Suresh, S. Basavarajappa, V. N. Gaitonde, G.L.Samuel, J. Paulo Davim, (2013), State of the Art Research in Machinability of Hardened Steels, Proc. IMechE., Part B: Journal of Engineering Manufacture, 227(2), pp 191–209.
  35. Aravinda Krishnan S. and G.L.Samuel, (2013), Multi-objective optimization of material removal rate and surface roughness in wire electrical discharge turning, International Journal of Advanced Manufacturing Technology, Vol 67, Issue 9, pp 2021-2032.
  36. Suresh R, S. Basavarajappa, G.L.Samuel, (2012), Predictive modeling of cutting forces and tool wear in hard turning using response surface methodology, Journal of Procedia Engineering, 2012, Vol-38, pp-73-81.
  37. Suresh, R., Basavarajappa, S., Gaitonde, V.N., G.L.Samuel, (2012), Machinability investigations on hardened AISI 4340 steel using coated carbide insert, International Journal of Refractory Metals and Hard Materials, 33 , pp.75-86.
  38. Suresh, R., Basavarajappa, S., G.L.Samuel, ( 2012), Some studies on hard turning of AISI 4340 steel using multilayer coated carbide tool, Measurement: Journal of the International Measurement Confederation, 45 (7), pp.1872-1884.
  39. Dhake H. G., and G.L.Samuel, (2012), Dimensional Evaluation of Axi-Symmetric Forms and Helical Profiles Machined Using Wire Electrical Discharge Turning Process, International Journal of Machining and Machinability of Materials, 12 (3), pp.252-265.
  40. Denis Ashok S. and G.L.Samuel, (2012), Harmonic analysis based method for separation of form error during evaluation of high speed spindle radial errors, iMechE Part B,Journal of Engineering Manufacture, 226(5), pp. 837–852.
  41. Denis Ashok S. and G.L.Samuel, (2012), Modeling, measurement and Evaluation of Spindle Radial Errors in a Miniaturized Machine Tool, International Journal of Advanced Manufacturing Technology, 59, pp. 445–461.
  42. Murugarajan A., and G.L.Samuel, (2011), Measurement, modeling and evaluation of surface parameters using capacitive sensor based measurement system, Metrology and Measurement Systems , vol. XVIII, No. 3, pp. 403-418.
  43. Rajamohan G., M.S. Shunmugam, G.L.Samuel, (2011), Effect of Probe Size and Measurement Strategies on Assessment of Freeform Profile Errors using Coordinate Measuring Machine, Measurement, 44, pp. 832–841.
  44. Rajamohan G., M. S. Shunmugam, G.L.Samuel, (2011), Practical measurement strategies for verification of freeform surfaces using coordinate measuring machines, Metrology and Measurement Systems, vol. XVIII, No. 2, pp 209-222.
  45. Denis Ashok S. and G.L.Samuel, (2011) Least square curve fitting technique for analyzing radial error data of a high speed spindle, International Journal of Manufacturing Research, Vol. 6, No.3 pp. 256 - 276.
  46. Hemanth G., G.L.Samuel and N.J. Vasa, (2011), Influence of Machining Parameters on Micro-drill performance, International Journal of Manufacturing Technology and Management, Vol. 22, No. 2, pp 124-144.
  47. Janardhan V. and G.L.Samuel, (2011) Investigations on Material Removal Rate in Wire Electrical Discharge Turning (WEDT) using Pulse Train Data Analysis, International Journal of Mechatronics and Intelligent Manufacturing. Vol. 2, Issue 1-2, pp. 17-40.
  48. Janardhan V. and G.L.Samuel, (2010), Pulse Train Data Analysis to Investigate the Effect of Machining Parameters on the Performance of Wire Electrical Discharge Turning (WEDT) Process, International Journal of Machine Tools and Manufacture, vol. 50, No.9, pp. 775–788.
  49. G.L.Samuel and Seung-Han Yang, ( 2010) Enhancement of dimensional accuracy of micro features by applying parametric error compensation to the miniaturised machine tool, Int. J. Computational Materials Science and Surface Engineering, Vol. 3, No.4 pp. 373 - 391.
  50. Ramalingam and G.L.Samuel, (2009) Investigation on the Conveying Velocity of a Linear Vibratory Feeder while Handling Bulk Sized Small Parts, International Journal of Advanced Manufacturing Technology, Vol. 44, 372–382.
  51. Darwin M and G.L.Samuel, (2009) Design and Implementation of Low Cost Automation in Heavy Vehicles Brake Assembly Line to Increase Productivity, International Journal of Productivity and Quality Management, vol. 4, No.202, 199-211.
  52. Igor Dunin Barkovski, G.L.Samuel and Seung-Han Yang, (2006) Compensation of Installation Errors in a Laser Vision System and Dimensional Inspection of Automobile Chassis, Journal of Mechanical Science and Technology, Vol. 20, No. 4, 437-446.
  53. G.L.Samuel and Seung-Han Yang, (2005), Determination and Mapping of Measurement and Design Coordinate systems using Computation Geometric Techniques, International Journal of Advanced Manufacturing Technology, Vol. 26, No. 7-8, 819-824.
  54. G.L.Samuel, Seung-Han Yang and Young –Suk Kim, (2005), Hybrid Algorithm for evaluation of dimensional error using the data obtained from Laser Vision System, Journal of Manufacturing Systems, Vol. 24, No.2, 122-130.
  55. G.L.Samuel and M.S. Shunmugam, (2003), Evaluation of circularity and sphericity from coordinate measurement data, Special Issue of International Journal of Material Processing Technology, Vol. 139, No. 1-3, 90-95.
  56. G.L.Samuel and M.S. Shunmugam, (2002), Evaluation of Sphericity Error from Form Data using Computational Geometric Techniques, International Journal of Machine Tools and Manufacture, Vol. 42, No. 3, 405-416.
  57. G.L.Samuel and M.S. Shunmugam, (2001), Evaluation of sphericity Error from Coordinate Measurement Data using Computational Geometric Techniques, Computer Methods in Applied Mechanics and Engineering, Vol. 190, No. 51-52, 6765-6781.
  58. G.L.Samuel and M.S. Shunmugam (2000), Evaluation of Circularity form coordinate and Form data Using Computational Geometric Techniques, Precision Engineering, Vol. 24, No. 3, 251-263.
  59. G.L.Samuel and M.S. Shunmugam (1999), Evaluation of Straightness and Flatness using Computational Geometric Techniques, Computer Aided Design, Vol. 31, No. 13, 829-843.

International Conferences

  1. M. Muniswamy, G.L.Samuel "Synthesis and characterization of TiO2 and graphite nanoparticles by pulse laser ablation at solid-solid interface", COPEN 11, IIT Indore.
  2. Sakti V, G.L.Samuel "Investigation into the surface integrity during micro end milling of aluminium using coated and uncoated tool", COPEN 11, IIT Indore.
  3. Shalini Singh and G.L.Samuel, "Micromachining of micro channels in single crystal silicon using ultrashort pulsed laser for MEMS application", 8th International Congress for Laser Advanced Metal Processing, Hiroshima, Japan, May 21-24, 2019.
  4. M.Murugesh and G.L.Samuel, "Effect of high pulse repetition rate for achieving micro/nano surface structures on Ti6Al4V using Femto Second laser micromachining", 8th International Congress for Laser Advanced Metal Processing, Hiroshima, Japan, May 21-24, 2019.
  5. Niketh S, G.L.Samuel "Surface Texturing of tribological interfaces - Experimental Analysis", 8th International Congress for Laser Advanced Metal Processing, Hiroshima, Japan, May 21-24, 2019.
  6. Niketh S, G.L.Samuel, "Hybrid micro textures - A multi-scale surface engineering approach for enhancing tribological characteristics", Hiroshima, Japan, May 21-24, 2019.
  7. Niketh S, G.L.Samuel, " Surface texturing ofTribological Interfaces -Numerical Modeling and Experimental Analysis" North American Research Conference, NAMRC47, Erie, PA, June 10-14, 2019.
  8. Kiran Kumar K, G.L.Samuel, Shunmugam M S, Characterization of Geometrical Features of Ultra-short Pulse Laser Drilled Microholes using Computed Tomography, 2nd International Conference on Computational Methods in Manufacturing, ICCMM 2019, March 8-9, 2019, Indian Institute of Technology Guwahati, India.
  9. Kanka Goswami and G.L.Samuel, "Process monitoring of Micro Electrical Discharge machining by Pulse classification and Acoustic Emission Spectroscopy", MATADOR 2019, 8 - 10 July 2019, China, (accepted).
  10. Niketh S, G.L.Samuel, "Experimental and analytical investigation into Drill tool temperature of surface functionalized drill tool while machining Ti6Al4V ", MATADOR 2019, 8 - 10 July 2019, China (accepted).
  11. Murugesh M and G.L.Samuel, "Machining of high quality microchannels on Ti6Al4V using ultra short pulsed laser", All India Manufacturing Technology Design and Research Conference, AIMTDR - 2018, Dec 13-15, 2018, Anna University, Chennai.
  12. Krupa J and G.L.Samuel, "Fabrication and characterization of helical grooved cylindrical electrodes generated by WED turning process" All India Manufacturing Technology Design and Research Conference, AIMTDR - 2018, Dec 13-15, 2018, Anna University, Chennai.
  13. Sri Phani Sushma and G.L.Samuel, "Numerical analysis of cutting modes in high speed machining of Aluminum alloys with PCD and CBN tool inserts", All India Manufacturing Technology Design and Research Conference, AIMTDR - 2018, Dec 13-15, 2018, Anna University, Chennai.
  14. Tony M Shaiju and G.L.Samuel, "Experimental investigation and finite element modeling of ELectrical discharge machining using hollow electrodes and injection flushing", All India Manufacturing Technology Design and Research Conference, AIMTDR - 2018, Dec 13-15, 2018, Anna University, Chennai.
  15. Yugandhar Arcot, G.L.Samuel and Lingxue Konga, “Micro Hot-Embossing of Serpentine Channels on PMMA based Microfluidic devices”, Proceedings of the Conference on Precision Engineering, pp. 1044-1047, COPEN 2017, IIT Madras.
  16. I. Sri Phani Sushma and G.L.Samuel, “Fabrication and Machining of AlMMC and Evaluation of Surface Finish and Hardness Parameters”, Proceedings of the Conference on Precision Engineering, pp. 1004-1007, COPEN 2017, IIT Madras.
  17. Kadirikota Rajesh Babu and G.L.Samuel, “Forced Vibration Analysis Of A Micro End Mill Cutter By Mode Superposition Method With Damping Included”, Proceedings of the Conference on Precision Engineering, pp. 875-878, COPEN 2017, IIT Madras.
  18. T. Jagadesh and G.L.Samuel, “Finite Element Simulation for Prediction of Cutting Forces During in-situ Cryogenic Micro Turning of Titanium Alloy”, Proceedings of the Conference on Precision Engineering, pp. 301-304, COPEN 2017, IIT Madras.
  19. Neha Patel, Jerry Caleb, V Ramalingam and G.L.Samuel, “Design and development of high precision and high amplification ratio micro gripper”, Proceedings of the Conference on Precision Engineering, pp. 1036-1039, COPEN 2017, IIT Madras.
  20. Rahul Dutta, G.L.Samuel, “Measurement of profile deviation and error compensation in tool path programming while machining free form surfaces”, All India Manufacturing Technology Design and Research Conference, AIMTDR 2016, College of Engineering Pune. (Accepted for oral presentation).
  21. Shalini Singh, G.L.Samuel, “Experimental investigation on influence of number of pulses on laser ablation morphology and heat effected zone of silicon wafer”, All India Manufacturing Technology Design and Research Conference, AIMTDR 2016, College of Engineering Pune. (Accepted for oral presentation).
  22. Joshna Gajula and G.L.Samuel, Investigations into tool wear characteristics of micro tools, All India Manufacturing Technology Design and Research Conference, AIMTDR 2016, College of Engineering Pune. (Accepted for oral presentation).
  23. Niketh S, G.L.Samuel, “Effect of micro scale textures on drilling performance of carbide tools in dry and wet machining of TI- 6AL- 4V”, ASME, IMECE-2016. (Accepted for oral presentation).
  24. Karthikeyan K and G.L.Samuel, “Automation of car door assembly inspection & surface measurement using laser displacement sensor” Proceedings of the Conference on Precision Engineering, COPEN 2015, IIT Bombay.
  25. Kanka Goswami and G.L.Samuel, “Investigation into the Surface Integrity of Components Machined with Micro-EDM Process”, Proceedings of the Conference on Precision Engineering, COPEN 2015, IIT Bombay.
  26. Niketh S and G.L.Samuel, “Micro-scale pattern generation on drill bit and its effect on the machining of Titanium alloys”, Proceedings of the Conference on Precision Engineering, COPEN 2015, IIT Bombay.
  27. Jagadesh, T., G.L.Samuel (2015) “Investigations into cutting forces, surface roughness, and chip morphology during micro turning of cryogenically treated titanium alloy” Advances in materials and processing technologies conference, AMPT 2015 December 14-17, at Universidad Carlos III de, Madrid, Spain, PP – 131.
  28. Rajesh Babu K. and G.L.Samuel, Experimental Modal Analysis (Ema) of a Spindle Bracket of a Miniaturized Machine Tool (Mmt), AIMTDR Conference, December 12-14, 2014, IIT Guwahati.
  29. Jai Karthik R and G.L.Samuel, Evaluation of Surface Area of a Corrugated Surface using a Confocal Displacement Sensor-based Measurement System, ICMMM Conference, August 8-9, 2014, IIT Madras.
  30. Rajesh Babu K. and G.L.Samuel, Evaluation of Static Stiffness of Micro End Mill Cutter by Analytical Approach Utilizing Equivalent Diameter Concept, ICMMM Conference, August 8-9, 2014, IIT Madras.
  31. Jagadesh T, G.L.Samuel, Finite element modeling for prediction of cutting forces during micro turning of Titanium alloy, AIMTDR Conference, December 12-14, 2014, IIT Guwahati.
  32. Jagadesh T, G.L.Samuel, Investigations into cutting forces and surface roughness in micro turning of titanium alloy using coated carbide tool, International Conference on Advances in Manufacturing and Materials Engineering, AMME 2014 March 27th-29th, 2014 NITK Surathkal.
  33. V Rishikesan, G.L.Samuel, Evaluation of surface profile parameters of a machined surface using confocal displacement sensor, International Conference on Advances in Manufacturing and Materials Engineering, AMME 2014, NITK Surathkal.
  34. Kalyan, C., G.L.Samuel, Finite element analysis of cutting edge radius effect in high speed micro turning of aluminum alloys using PCD tool, 9th International Conference on MicroManufacturing (ICOMM2014), National University of Singapore (NUS), 25-28 March 2014.
  35. Kalyan C and G.L.Samuel, Modeling and Analysis of High Speed Machining of Al-Si alloy using PCD Tool, International Conference on Precision, Meso, Micro And Nano Engineering (COPEN 2013), National Institute Of Technology Calicut, Dec 2013 (Accepted).
  36. Rajesh Babu K. and G.L.Samuel, Modal Analysis of a Micro End Mill Cutter by Analytical and Numerical Methods, International Conference on Precision, Meso, Micro And Nano Engineering (COPEN 2013), National Institute Of Technology Calicut, Dec 2013 (Accepted).
  37. Giridharan A., G.L.Samuel, Investigation into Material Removal Rate (MRR) of Cylindrical Components Machined using Wire Electrical Discharge Turning (WEDT) Process, 4th International and 25th All India Manufacturing Technology, Design and Research Conference (AIMTDR 2012), 14-16 December, 2012, Jadavpur University, Kolkata, pp 493-498.
  38. Giridharan.A and G.L.Samuel, Investigation into energy consumption, surface integrity and material removal rate during wire electrical discharge turning (WEDT) process, Asian Academic Seminar on Manufacturing, Design and Innovation, IIT Bombay, 3-8 December, 2012 (Paper no. A17).
  39. Bhagath Reddy P., and G.L.Samuel, Investigation into Heat Affected Zone during machining of Silicon Wafer using Wire Electrical Discharge Machining (WEDM) process, 15th International Conference on Advances in Materials & Processing Technologies (AMPT2012), 23-26 September 2012, Wollongong, Australia, pp 11487-11492.
  40. R. Suresh, S. Basavarajappa, G.L.Samuel ‘Force Prediction Model of Multilayer Coated Carbide Tool in Hard Turning of AISI 4340 Steel Using Response Surface Methodology’, Int. Conf. on Materials Processing and Characterization, (ICMPC-2012), 8th to10th March 2012, GRIET, Hyderabad.
  41. R. Suresh, S. Basavarajappa, G.L.Samuel, ‘Tool life, wear behavior and surface roughness in turning of hardened AISI4340 steel with ceramics and coated carbide cutting tools’, Int. Conf. on Recent Trends in Advanced materials, (ICRAM-2012), VIT University, Vellore, 20-22nd Feb.2012.
  42. R. Suresh, S. Basavarajappa, G.L.Samuel, ‘Influence of process parameters on surface, subsurface deformation and through thickness residual stress distribution in hard turning of AISI 4340 steel’, Int. Conf. on Operational Excellence for Global Competitiveness, (ICOEGC-2011), 3-5th Feb. 2011, RVCE, Bangalore, Karnataka.
  43. Giridharan A., G.L.Samuel, Investigation into Surface Characteristics of Cylindrical Components Machined using Wire Electrical Discharge Turning (WEDT) Process, American Society for Precision Engineering (ASPE) 2011 Annual Meeting, Denver, Colorado, USA, November 13-18, 2011, paper no. 3376.
  44. Murugarajan A and G.L.Samuel, Investigations into modeling and assessment of theoretical profiles using capacitive sensor, Proceedings of the International Conference on Computational Methods in Manufacturing (ICCMM 2011), IIT Guwahati, December, 2011, p 437-445.
  45. G.L.Samuel and Ajay Bhagat, Development of an expert system for designing of automobile dampers, Proceedings of IEEE Computer Society, 4th International Conference on Emerging Trends in Engineering & Technology (ICETET-11), Mauritius, November, 2011, pp 88-93.
  46. Denis Ashok S. And G.L.Samuel, A new method for assessing asynchronous radial error of a miniaturized machine tool spindle, Advanced Mathematical and Computational Tools in Metrology and Testing (AMCTM 2011) at Goteborg, Sweden, June 2011, pp. 350-357.
  47. Makani Sneha Priya and G.L.Samuel, Design and machining of integrated miniaturized components, Proceedings of the 3rd International and 24th All India Manufacturing Technology Design and Research (AIMTDR2010) conference, 2010, Andhra University, Vishakapatnam, pp.99-103.
  48. Denis Ashok S. And G.L.Samuel, Techniques for handling speed variations during high speed spindle error measurement, Proceedings of the 3rd International and 24th All India Manufacturing Technology Design and Research (AIMTDR 2010) conference, 2010, Andhra University, Vishakapatnam, pp.789-794.
  49. Giridharan. A. And G.L.Samuel, Effect of Pulse Off Time on Specific Energy Consumption during Wire Electrical Discharge Turning (WEDT) Process, Proc. Of the 4th International Conference on Advances in Mechanical Engineering, September 23-25, 2010, Surat, India, pp296-300.
  50. H. G. Dhake, V. Janardhan and G.L.Samuel, Machining and Evaluation of Axi-symmetric Forms turned using Cylindrical Wire EDM Process, 3rd International Conference on Advanced Design and Manufacturing, Nottingham Tent University, Nottingham, UK, 8-10 September 2010, Vol.2., pp. 18-24.
  51. Murugarajan. A and G.L.Samuel, Prediction of surface characteristics of a machined surface using discrete element model, Proceedings of 6th International conference on Precision, Meso, Micro & Nano Engineering, PSG College of engineering, Coimbatore. Dec. 9-11, 2009, pp. I-59 to I-64.
  52. V. Janardhan and G.L.Samuel, Investigations into turning of cylindrical components using wire electrical discharge machine, Proceedings of the International Conference on Advances in Mechanical Engineering , S.V. National Institute of Technology, Surat, August 3-5, 2009, pp 835-839.
  53. S. Denis Ashok and G.L.Samuel , Segmented fitting method for radial error analysis of a miniaturized machine tool spindle, Proceedings of 6th International conference on Precision, Meso, Micro & Nano Engineering, December 9-11, PSG College of engineering, Coimbatore, 2009, pp I-35 to I-40.
  54. S. Denis Ashok and G.L.Samuel, Least square estimation of harmonic components in radial error measurement of a miniaturized machine tool spindle, Proceedings of 24th Annual meeting of American society for precesion Engnieering, October 4-9, Monterey, CA,USA., 2009, pp 347-350.
  55. S. Denis Ashok and G.L.Samuel, Modeling and simulation of spindle error motions for investigating their effect on positioning accuracy, Proceedings of first International & 22nd All India Manufacturing Technology Design & Research Conference (22ndAIMTDR), 21st-23rd December 2006, IIT Roorkee, pp.181-186.
  56. Denis Ashok. S and G.L.Samuel, Regression model and algorithm for evaluation of spindle error motion, Proceedings of International Conference on Digital Factory, ICDF 2008, CIT Coimbatore, August 2008, pp. 54-59.
  57. Murugarajan. A and G.L.Samuel, Modeling and prediction of surface undulations using data form capacitance sensors, Proceedings of International Conference on Advances in Mechanical Engineering, ICAME 2008, IISc, Bangalore, July, 2008, pp. 57- 60.
  58. Preetha U.N, Srinivasa Y.V and G.L.Samuel, Investigation into the influence of chatter and vibration on micro channel milling COPEN 2007, Proceedings of International Conference on Precision, Meso, Micro and Nano Engineering, Dec. 2007, pp. 203-208.
  59. G. Rajamohan, M.S. Shunmugam and G.L.Samuel, Sampling strategies for verification of free form profiles using Coordinate measuring machines, 9th International Symposium on Measurement and Quality Control, IIT Madras, INDIA, Dec 2007, 135-140.
  60. S. Denis Ashok and G.L.Samuel, Modeling and Simulation of Spindle error motion for investigating their effect on positioning accuracy, 1st International and 22nd AIMTDR Conference, December 21-24, IIT Roorkee, INDIA, Dec.2006,181-186.
  61. M. Ramalingam and G.L.Samuel, Development of Automated part feeding system for handling springs and screws, Proceedings of the International Conference on Advances in Mechanical Engineering (ICAME 2006), SRM Institute of Science and Technology Deemed University, Dec. 14-16, 2006.
  62. G.L.Samuel and M.S. Shunmugam, Evaluation of circularity and Sphericity from coordinate measurement data, Proceedings of The Ninth International Manufacturing Conference in China, IMMC ‘2000, Hong Kong, Aug. 2000, 289-290.
  63. G.L.Samuel and M.S. Shunmugam, Evaluation of Form Error Using Computational Geometric Techniques, Proceedings of International conference on Intelligent Flexible Autonomous Manufacturing Systems, IFAMS’ 2000, Coimbatore, Jan. 2000, 355-362. (Won the Best Research Paper Award).

National Conferences

  1. G.L.Samuel and N.G. Subramanya Udupa, A study on load bearing ability of interference fits based on roundness profile analysis, All India Manufacturing Technology Design and Research Conference (AIMTDR), IIT, Kharagpur, Dec. 1998, pp 59-63.
  2. G.L.Samuel and M.S. Shunmugam, Analysis of coordinate data and form measurement data for evaluation of straightness and flatness errors, Proceedings of First National Conference on Precision Engineering, COPEN 2000, IIT Chennai, Jan. 2000, pp 339-348.
  3. G.L.Samuel and M.S. Shunmugam, Use of Limacon and Limacoid in Evaluation of Circularity and Sphericity Errors, All India Manufacturing Technology Design and Research Conference (AIMTDR), Chennai, Dec .2000, pp 539-545.
  4. G.L.Samuel and D.G. Harris Samuel, Design and development of software for control of hydraulic revolute robot, National Conference on Computer Integrated Design and Manufacturing, Coimbatore, May 2001, pp 160-164.
  5. G.L.Samuel and M.S. Shunmugam, Evaluation of circularity and sphericity from coordinate measurement data, Proceedings of Symposium on Manufacturing Excellence (SYMAX), Indian Institute of Technology, Madras, January 2002, pp 93-94.
  6. P.N. Mamatha, K. Leo Dev Wins, D.G. Harris Samuel and G.L.Samuel, CMM- A simple solution to measuring problems, National seminar no Emerging Trends in Mechatronics for Automation, Regional Engineering College, Rourkela, INDIA, Nov 2002, pp 363-372.
  7. G.L.Samuel, T. Jagan and N.R. Saktivel, FEM analysis of gear box housing National seminar on Emerging Trends in Mechatronics for Automation, Regional Engineering College, Rourkela, INDIA, Nov 2002, pp 373-377.
  8. D. Davidson, G.L.Samuel, D.G. Harris Samuel, Benchmarking- A TQM tool for Indian Industry to compete globally, Proceedings of the National, conference on Quality Engineering and Management (NCQE-2003), Coimbatore, INDIA, Jan 2003, pp 180-186.
  9. R. Raja, T. Jegan and G.L.Samuel, The role of BIS in the standardization and quality improvement of products in India –a critical review, National Conference on Quality Coimbatore, Jan. 2003, pp 238-242.
  10. R. Suresh, S. Basavarajappa, G.L.Samuel, ‘Tool wear and surface integrity in turning of hardened AISI4340 steel with coated carbide tool’, National Conference on Advances in Mechanical Engineering, (NAME-2010), 24-25th Sept. 2010, JNNCE, Shivamoga, Karnataka, Proceedings published by Allied publishers., 2010, pp. 427-433, (ISBN- 978-81-8424-623).
  11. R. Suresh, S. Basavarajappa, G.L.Samuel, ‘Measurement of cutting Temperature while Machining-review’, National Conference on Mechanical Engineering Trends, (NCMET-2010), 19th Feb.2010, BITM, Bellary-583104.
  12. R. Suresh, S. Basavarajappa, G.L.Samuel, ‘Surface Integrity in hard machining and impact on functional performance and life of machined products’, National conference on recent trend in advanced material, (RTAM- 2009), Dec. 18th 2009, KVGCE Sullia-574327, Karnataka.
  13. R. Suresh, S. Basavarajappa, G.L.Samuel, Machining of Hardened Steels Review and discussion, National Conference on Advances In Materials and Manufacturing Process, (AMMP- 2007), 5-6th Oct. 2007, UBDT College Of Engineering, Davangere-02, Karnataka.
  14. R. Suresh, S. Basavarajappa, G.L.Samuel, ‘Tool wear and surface integrity in turning of hardened AISI4340 steel with coated carbide tool’, National Conference on Advances in Mechanical Engineering, (NAME-2010), 24-25th Sept. 2010, JNNCE, Shivamoga, Karnataka, Proceedings published by Allied publishers., 2010, pp. 427-433, (ISBN- 978-81-8424-623).